You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
489 lines
19 KiB
489 lines
19 KiB
/*!
|
|
\file usbh_msc_scsi.c
|
|
\brief USB MSC SCSI commands implemention
|
|
|
|
\version 2019-06-05, V1.0.0, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "usbh_msc_core.h"
|
|
#include "usbh_msc_scsi.h"
|
|
#include "usbh_msc_bbb.h"
|
|
|
|
usbh_msc_parameter usbh_msc_param;
|
|
|
|
uint8_t usbh_databuf_in[512];
|
|
uint8_t usbh_databuf_out[512];
|
|
|
|
/*!
|
|
\brief send 'Test unit ready' command to the device
|
|
\param[in] pudev: pointer to usb device
|
|
\param[out] none
|
|
\retval operation status
|
|
*/
|
|
uint8_t usbh_msc_test_unitready (usb_core_driver *pudev)
|
|
{
|
|
uint8_t index;
|
|
usbh_msc_status status = USBH_MSC_BUSY;
|
|
|
|
if (pudev->host.connect_status) {
|
|
switch (msc_botxfer_param.cmd_state_machine) {
|
|
case CMD_SEND_STATE:
|
|
/* prepare the CBW and relevent field */
|
|
msc_cbw_data.field.dCBWDataTransferLength = 0; /* no data transfer */
|
|
msc_cbw_data.field.bmCBWFlags = USB_TRX_OUT;
|
|
msc_cbw_data.field.bCBWCBLength = CBW_LENGTH_TEST_UNIT_READY;
|
|
|
|
msc_botxfer_param.xfer_buf = msc_csw_data.CSWArray;
|
|
msc_botxfer_param.data_len = USBH_MSC_CSW_MAX_LENGTH;
|
|
msc_botxfer_param.msc_state_current = USBH_MSC_TEST_UNIT_READY;
|
|
|
|
for (index = CBW_CB_LENGTH; index != 0; index--) {
|
|
msc_cbw_data.field.CBWCB[index] = 0x00;
|
|
}
|
|
|
|
msc_cbw_data.field.CBWCB[0] = SCSI_TEST_UNIT_READY;
|
|
msc_botxfer_param.bot_state = USBH_MSC_SEND_CBW;
|
|
|
|
/* start the transfer, then let the state machine magage the other transactions */
|
|
msc_botxfer_param.msc_state = USBH_MSC_BOT_USB_TRANSFERS;
|
|
msc_botxfer_param.bot_xfer_status = USBH_MSC_BUSY;
|
|
msc_botxfer_param.cmd_state_machine = CMD_WAIT_STATUS;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
break;
|
|
|
|
case CMD_WAIT_STATUS:
|
|
if (msc_botxfer_param.bot_xfer_status == USBH_MSC_OK) {
|
|
/* commands successfully sent and response received */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_OK;
|
|
} else if ( msc_botxfer_param.bot_xfer_status == USBH_MSC_FAIL) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_FAIL;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_PHASE_ERROR) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_PHASE_ERROR;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
\brief send the read capacity command to the device
|
|
\param[in] pudev: pointer to usb device
|
|
\param[out] none
|
|
\retval operation status
|
|
*/
|
|
uint8_t usbh_msc_read_capacity10 (usb_core_driver *pudev)
|
|
{
|
|
uint8_t index;
|
|
usbh_msc_status status = USBH_MSC_BUSY;
|
|
|
|
if (pudev->host.connect_status) {
|
|
switch (msc_botxfer_param.cmd_state_machine) {
|
|
case CMD_SEND_STATE:
|
|
/* prepare the CBW and relevent field */
|
|
msc_cbw_data.field.dCBWDataTransferLength = READ_CAPACITY10_DATA_LEN;
|
|
msc_cbw_data.field.bmCBWFlags = USB_TRX_IN;
|
|
msc_cbw_data.field.bCBWCBLength = CBW_LENGTH;
|
|
|
|
msc_botxfer_param.xfer_buf = usbh_databuf_in;
|
|
msc_botxfer_param.msc_state_current = USBH_MSC_READ_CAPACITY10;
|
|
|
|
for (index = CBW_CB_LENGTH; index != 0; index--) {
|
|
msc_cbw_data.field.CBWCB[index] = 0x00;
|
|
}
|
|
|
|
msc_cbw_data.field.CBWCB[0] = SCSI_READ_CAPACITY10;
|
|
msc_botxfer_param.bot_state = USBH_MSC_SEND_CBW;
|
|
|
|
/* start the transfer, then let the state machine manage the other transactions */
|
|
msc_botxfer_param.msc_state = USBH_MSC_BOT_USB_TRANSFERS;
|
|
msc_botxfer_param.bot_xfer_status = USBH_MSC_BUSY;
|
|
msc_botxfer_param.cmd_state_machine = CMD_WAIT_STATUS;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
break;
|
|
|
|
case CMD_WAIT_STATUS:
|
|
if (msc_botxfer_param.bot_xfer_status == USBH_MSC_OK) {
|
|
/* assign the capacity */
|
|
(((uint8_t*)&usbh_msc_param.msc_capacity )[3]) = usbh_databuf_in[0];
|
|
(((uint8_t*)&usbh_msc_param.msc_capacity )[2]) = usbh_databuf_in[1];
|
|
(((uint8_t*)&usbh_msc_param.msc_capacity )[1]) = usbh_databuf_in[2];
|
|
(((uint8_t*)&usbh_msc_param.msc_capacity )[0]) = usbh_databuf_in[3];
|
|
|
|
/* assign the page length */
|
|
(((uint8_t*)&usbh_msc_param.msc_page_len )[1]) = usbh_databuf_in[6];
|
|
(((uint8_t*)&usbh_msc_param.msc_page_len )[0]) = usbh_databuf_in[7];
|
|
|
|
/* commands successfully sent and response received */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_OK;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_FAIL) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_FAIL;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_PHASE_ERROR) {
|
|
/* Failure Mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_PHASE_ERROR;
|
|
} else {
|
|
/* wait for the commands to get completed */
|
|
/* no change in state machine */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
\brief send the mode sense6 command to the device
|
|
\param[in] pudev: pointer to usb device
|
|
\param[out] none
|
|
\retval operation status
|
|
*/
|
|
uint8_t usbh_msc_mode_sense6 (usb_core_driver *pudev)
|
|
{
|
|
uint8_t index;
|
|
usbh_msc_status status = USBH_MSC_BUSY;
|
|
|
|
if (pudev->host.connect_status) {
|
|
switch (msc_botxfer_param.cmd_state_machine) {
|
|
case CMD_SEND_STATE:
|
|
/* prepare the CBW and relevent field */
|
|
msc_cbw_data.field.dCBWDataTransferLength = XFER_LEN_MODE_SENSE6;
|
|
msc_cbw_data.field.bmCBWFlags = USB_TRX_IN;
|
|
msc_cbw_data.field.bCBWCBLength = CBW_LENGTH;
|
|
|
|
msc_botxfer_param.xfer_buf = usbh_databuf_in;
|
|
msc_botxfer_param.msc_state_current = USBH_MSC_MODE_SENSE6;
|
|
|
|
for (index = CBW_CB_LENGTH; index != 0; index--) {
|
|
msc_cbw_data.field.CBWCB[index] = 0x00;
|
|
}
|
|
|
|
msc_cbw_data.field.CBWCB[0] = SCSI_MODE_SENSE6;
|
|
msc_cbw_data.field.CBWCB[2] = MODE_SENSE_PAGE_CONTROL_FIELD | MODE_SENSE_PAGE_CODE;
|
|
msc_cbw_data.field.CBWCB[4] = XFER_LEN_MODE_SENSE6;
|
|
msc_botxfer_param.bot_state = USBH_MSC_SEND_CBW;
|
|
|
|
/* start the transfer, then let the state machine manage the other transactions */
|
|
msc_botxfer_param.msc_state = USBH_MSC_BOT_USB_TRANSFERS;
|
|
msc_botxfer_param.bot_xfer_status = USBH_MSC_BUSY;
|
|
msc_botxfer_param.cmd_state_machine = CMD_WAIT_STATUS;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
break;
|
|
|
|
case CMD_WAIT_STATUS:
|
|
if (msc_botxfer_param.bot_xfer_status == USBH_MSC_OK) {
|
|
/* assign the write protect status */
|
|
/* if writeprotect = 0, writing is allowed
|
|
if writeprotect != 0, disk is write protected */
|
|
if (usbh_databuf_in[2] & MASK_MODE_SENSE_WRITE_PROTECT) {
|
|
usbh_msc_param.msc_write_protect = DISK_WRITE_PROTECTED;
|
|
} else {
|
|
usbh_msc_param.msc_write_protect = 0;
|
|
}
|
|
|
|
/* commands successfully sent and response received */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_OK;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_FAIL) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_FAIL;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_PHASE_ERROR) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_PHASE_ERROR;
|
|
} else {
|
|
/* wait for the commands to get completed */
|
|
/* no change in state machine */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
\brief send the Request Sense command to the device
|
|
\param[in] pudev: pointer to usb device
|
|
\param[out] none
|
|
\retval operation status
|
|
*/
|
|
uint8_t usbh_msc_request_sense (usb_core_driver *pudev)
|
|
{
|
|
usbh_msc_status status = USBH_MSC_BUSY;
|
|
uint8_t index;
|
|
|
|
if (pudev->host.connect_status) {
|
|
switch (msc_botxfer_param.cmd_state_machine) {
|
|
case CMD_SEND_STATE:
|
|
/* prepare the cbw and relevent field */
|
|
msc_cbw_data.field.dCBWDataTransferLength = ALLOCATION_LENGTH_REQUEST_SENSE;
|
|
msc_cbw_data.field.bmCBWFlags = USB_TRX_IN;
|
|
msc_cbw_data.field.bCBWCBLength = CBW_LENGTH;
|
|
|
|
msc_botxfer_param.xfer_buf = usbh_databuf_in;
|
|
msc_botxfer_param.msc_state_bkp = msc_botxfer_param.msc_state_current;
|
|
msc_botxfer_param.msc_state_current = USBH_MSC_REQUEST_SENSE;
|
|
|
|
for (index = CBW_CB_LENGTH; index != 0; index--) {
|
|
msc_cbw_data.field.CBWCB[index] = 0x00;
|
|
}
|
|
|
|
msc_cbw_data.field.CBWCB[0] = SCSI_REQUEST_SENSE;
|
|
msc_cbw_data.field.CBWCB[1] = DESC_REQUEST_SENSE;
|
|
msc_cbw_data.field.CBWCB[4] = ALLOCATION_LENGTH_REQUEST_SENSE;
|
|
|
|
msc_botxfer_param.bot_state = USBH_MSC_SEND_CBW;
|
|
|
|
/* start the transfer, then let the state machine magage the other transactions */
|
|
msc_botxfer_param.msc_state = USBH_MSC_BOT_USB_TRANSFERS;
|
|
msc_botxfer_param.bot_xfer_status = USBH_MSC_BUSY;
|
|
msc_botxfer_param.cmd_state_machine = CMD_WAIT_STATUS;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
break;
|
|
|
|
case CMD_WAIT_STATUS:
|
|
if (msc_botxfer_param.bot_xfer_status == USBH_MSC_OK) {
|
|
/* get sense data */
|
|
(((uint8_t*)&usbh_msc_param.msc_sense_key )[3]) = usbh_databuf_in[0];
|
|
(((uint8_t*)&usbh_msc_param.msc_sense_key )[2]) = usbh_databuf_in[1];
|
|
(((uint8_t*)&usbh_msc_param.msc_sense_key )[1]) = usbh_databuf_in[2];
|
|
(((uint8_t*)&usbh_msc_param.msc_sense_key )[0]) = usbh_databuf_in[3];
|
|
|
|
/* commands successfully sent and response received */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_OK;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_FAIL) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_FAIL;
|
|
} else if ( msc_botxfer_param.bot_xfer_status == USBH_MSC_PHASE_ERROR ) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_PHASE_ERROR;
|
|
} else {
|
|
/* wait for the commands to get completed */
|
|
/* no change in state machine */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
\brief send the write10 command to the device
|
|
\param[in] pudev: pointer to usb device
|
|
\param[in] data_buf: data buffer contains the data to write
|
|
\param[in] addr: address to which the data will be written
|
|
\param[in] byte_num: number of bytes to be written
|
|
\param[out] none
|
|
\retval operation status
|
|
*/
|
|
uint8_t usbh_msc_write10 (usb_core_driver *pudev, uint8_t *data_buf, uint32_t addr, uint32_t byte_num)
|
|
{
|
|
uint8_t index;
|
|
uint16_t nbOfPages;
|
|
usbh_msc_status status = USBH_MSC_BUSY;
|
|
|
|
if (pudev->host.connect_status) {
|
|
switch (msc_botxfer_param.cmd_state_machine) {
|
|
case CMD_SEND_STATE:
|
|
msc_cbw_data.field.dCBWDataTransferLength = byte_num;
|
|
msc_cbw_data.field.bmCBWFlags = USB_TRX_OUT;
|
|
msc_cbw_data.field.bCBWCBLength = CBW_LENGTH;
|
|
msc_botxfer_param.xfer_buf = data_buf;
|
|
|
|
for (index = CBW_CB_LENGTH; index != 0; index--) {
|
|
msc_cbw_data.field.CBWCB[index] = 0x00;
|
|
}
|
|
|
|
msc_cbw_data.field.CBWCB[0] = SCSI_WRITE10;
|
|
|
|
/* logical block address */
|
|
msc_cbw_data.field.CBWCB[2] = (((uint8_t*)&addr)[3]);
|
|
msc_cbw_data.field.CBWCB[3] = (((uint8_t*)&addr)[2]);
|
|
msc_cbw_data.field.CBWCB[4] = (((uint8_t*)&addr)[1]);
|
|
msc_cbw_data.field.CBWCB[5] = (((uint8_t*)&addr)[0]);
|
|
|
|
/* USBH_MSC_PAGE_LENGTH = 512*/
|
|
nbOfPages = byte_num / USBH_MSC_PAGE_LENGTH;
|
|
|
|
/* tranfer length */
|
|
msc_cbw_data.field.CBWCB[7] = (((uint8_t *)&nbOfPages)[1]);
|
|
msc_cbw_data.field.CBWCB[8] = (((uint8_t *)&nbOfPages)[0]);
|
|
|
|
msc_botxfer_param.bot_state = USBH_MSC_SEND_CBW;
|
|
|
|
/* start the transfer, then let the state machine magage the other transactions */
|
|
msc_botxfer_param.msc_state = USBH_MSC_BOT_USB_TRANSFERS;
|
|
msc_botxfer_param.bot_xfer_status = USBH_MSC_BUSY;
|
|
msc_botxfer_param.cmd_state_machine = CMD_WAIT_STATUS;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
break;
|
|
|
|
case CMD_WAIT_STATUS:
|
|
if (msc_botxfer_param.bot_xfer_status == USBH_MSC_OK) {
|
|
/* commands successfully sent and response received */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_OK;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_FAIL) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_PHASE_ERROR) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_PHASE_ERROR;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
\brief send the read10 command to the device
|
|
\param[in] pudev: pointer to usb device
|
|
\param[in] data_buf: data buffer contains the data to write
|
|
\param[in] addr: address to which the data will be written
|
|
\param[in] byte_num: number of bytes to be written
|
|
\param[out] none
|
|
\retval operation status
|
|
*/
|
|
uint8_t usbh_msc_read10 (usb_core_driver *pudev, uint8_t *data_buf, uint32_t addr, uint32_t byte_num)
|
|
{
|
|
uint8_t index;
|
|
uint16_t nbOfPages;
|
|
|
|
static usbh_msc_status status = USBH_MSC_BUSY;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
|
|
if (pudev->host.connect_status) {
|
|
switch (msc_botxfer_param.cmd_state_machine) {
|
|
case CMD_SEND_STATE:
|
|
/* prepare the CBW and relevent field */
|
|
msc_cbw_data.field.dCBWDataTransferLength = byte_num;
|
|
msc_cbw_data.field.bmCBWFlags = USB_TRX_IN;
|
|
msc_cbw_data.field.bCBWCBLength = CBW_LENGTH;
|
|
|
|
msc_botxfer_param.xfer_buf = data_buf;
|
|
|
|
for(index = CBW_CB_LENGTH; index != 0; index--)
|
|
{
|
|
msc_cbw_data.field.CBWCB[index] = 0x00;
|
|
}
|
|
|
|
msc_cbw_data.field.CBWCB[0] = SCSI_READ10;
|
|
|
|
/* logical block address */
|
|
msc_cbw_data.field.CBWCB[2] = (((uint8_t*)&addr)[3]);
|
|
msc_cbw_data.field.CBWCB[3] = (((uint8_t*)&addr)[2]);
|
|
msc_cbw_data.field.CBWCB[4] = (((uint8_t*)&addr)[1]);
|
|
msc_cbw_data.field.CBWCB[5] = (((uint8_t*)&addr)[0]);
|
|
|
|
/* USBH_MSC_PAGE_LENGTH = 512 */
|
|
nbOfPages = byte_num / USBH_MSC_PAGE_LENGTH;
|
|
|
|
/* tranfer length */
|
|
msc_cbw_data.field.CBWCB[7] = (((uint8_t *)&nbOfPages)[1]);
|
|
msc_cbw_data.field.CBWCB[8] = (((uint8_t *)&nbOfPages)[0]);
|
|
|
|
msc_botxfer_param.bot_state = USBH_MSC_SEND_CBW;
|
|
|
|
/* start the transfer, then let the state machine magage the other transactions */
|
|
msc_botxfer_param.msc_state = USBH_MSC_BOT_USB_TRANSFERS;
|
|
msc_botxfer_param.bot_xfer_status = USBH_MSC_BUSY;
|
|
msc_botxfer_param.cmd_state_machine = CMD_WAIT_STATUS;
|
|
|
|
status = USBH_MSC_BUSY;
|
|
break;
|
|
|
|
case CMD_WAIT_STATUS:
|
|
if ((msc_botxfer_param.bot_xfer_status == USBH_MSC_OK) && \
|
|
(pudev->host.connect_status)) {
|
|
/* commands successfully sent and response received */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_OK;
|
|
} else if ((msc_botxfer_param.bot_xfer_status == USBH_MSC_FAIL) && \
|
|
(pudev->host.connect_status)) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
} else if (msc_botxfer_param.bot_xfer_status == USBH_MSC_PHASE_ERROR) {
|
|
/* failure mode */
|
|
msc_botxfer_param.cmd_state_machine = CMD_SEND_STATE;
|
|
status = USBH_MSC_PHASE_ERROR;
|
|
} else {
|
|
/* wait for the commands to get completed */
|
|
/* no change in state machine */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|