You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1363 lines
64 KiB
1363 lines
64 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_rcc.h
|
|
* @author MCD Application Team
|
|
* @version V1.2.0
|
|
* @date 26-December-2014
|
|
* @brief Header file of RCC HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_RCC_H
|
|
#define __STM32F4xx_HAL_RCC_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCC
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup RCC_Exported_Types RCC Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief RCC PLL configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLState; /*!< The new state of the PLL.
|
|
This parameter can be a value of @ref RCC_PLL_Config */
|
|
|
|
uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
|
|
This parameter must be a value of @ref RCC_PLL_Clock_Source */
|
|
|
|
uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
|
|
|
|
uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
|
|
This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
|
|
|
|
uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
|
|
This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
|
|
|
|
uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
|
|
This parameter must be a number between Min_Data = 4 and Max_Data = 15 */
|
|
|
|
}RCC_PLLInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t OscillatorType; /*!< The oscillators to be configured.
|
|
This parameter can be a value of @ref RCC_Oscillator_Type */
|
|
|
|
uint32_t HSEState; /*!< The new state of the HSE.
|
|
This parameter can be a value of @ref RCC_HSE_Config */
|
|
|
|
uint32_t LSEState; /*!< The new state of the LSE.
|
|
This parameter can be a value of @ref RCC_LSE_Config */
|
|
|
|
uint32_t HSIState; /*!< The new state of the HSI.
|
|
This parameter can be a value of @ref RCC_HSI_Config */
|
|
|
|
uint32_t HSICalibrationValue; /*!< The calibration trimming value.
|
|
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
|
|
|
|
uint32_t LSIState; /*!< The new state of the LSI.
|
|
This parameter can be a value of @ref RCC_LSI_Config */
|
|
|
|
RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
|
|
|
|
}RCC_OscInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC System, AHB and APB busses clock configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t ClockType; /*!< The clock to be configured.
|
|
This parameter can be a value of @ref RCC_System_Clock_Type */
|
|
|
|
uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
|
|
This parameter can be a value of @ref RCC_System_Clock_Source */
|
|
|
|
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
|
|
This parameter can be a value of @ref RCC_AHB_Clock_Source */
|
|
|
|
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
|
|
This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
|
|
|
|
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
|
|
This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
|
|
|
|
}RCC_ClkInitTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RCC_Exported_Constants RCC Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_Oscillator_Type Oscillator Type
|
|
* @{
|
|
*/
|
|
#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
|
|
#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
|
|
#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
|
|
#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
|
|
#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_HSE_Config HSE Config
|
|
* @{
|
|
*/
|
|
#define RCC_HSE_OFF ((uint8_t)0x00)
|
|
#define RCC_HSE_ON ((uint8_t)0x01)
|
|
#define RCC_HSE_BYPASS ((uint8_t)0x05)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LSE_Config LSE Config
|
|
* @{
|
|
*/
|
|
#define RCC_LSE_OFF ((uint8_t)0x00)
|
|
#define RCC_LSE_ON ((uint8_t)0x01)
|
|
#define RCC_LSE_BYPASS ((uint8_t)0x05)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_HSI_Config HSI Config
|
|
* @{
|
|
*/
|
|
#define RCC_HSI_OFF ((uint8_t)0x00)
|
|
#define RCC_HSI_ON ((uint8_t)0x01)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LSI_Config LSI Config
|
|
* @{
|
|
*/
|
|
#define RCC_LSI_OFF ((uint8_t)0x00)
|
|
#define RCC_LSI_ON ((uint8_t)0x01)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_PLL_Config PLL Config
|
|
* @{
|
|
*/
|
|
#define RCC_PLL_NONE ((uint8_t)0x00)
|
|
#define RCC_PLL_OFF ((uint8_t)0x01)
|
|
#define RCC_PLL_ON ((uint8_t)0x02)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
|
|
* @{
|
|
*/
|
|
#define RCC_PLLP_DIV2 ((uint32_t)0x00000002)
|
|
#define RCC_PLLP_DIV4 ((uint32_t)0x00000004)
|
|
#define RCC_PLLP_DIV6 ((uint32_t)0x00000006)
|
|
#define RCC_PLLP_DIV8 ((uint32_t)0x00000008)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
|
|
#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_System_Clock_Type System Clock Type
|
|
* @{
|
|
*/
|
|
#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
|
|
#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
|
|
#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
|
|
#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_System_Clock_Source System Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
|
|
#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
|
|
#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
|
|
#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
|
|
#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
|
|
#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
|
|
#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
|
|
#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
|
|
#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
|
|
#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
|
|
#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
|
|
#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
|
|
#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
|
|
#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
|
|
#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100)
|
|
#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300)
|
|
#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_I2S_Clock_Source I2S Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000)
|
|
#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_MCO_Index MCO Index
|
|
* @{
|
|
*/
|
|
#define RCC_MCO1 ((uint32_t)0x00000000)
|
|
#define RCC_MCO2 ((uint32_t)0x00000001)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000)
|
|
#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
|
|
#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
|
|
#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000)
|
|
#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
|
|
#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
|
|
#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
|
|
* @{
|
|
*/
|
|
#define RCC_MCODIV_1 ((uint32_t)0x00000000)
|
|
#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
|
|
#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
|
|
#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
|
|
#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_Interrupt Interrupts
|
|
* @{
|
|
*/
|
|
#define RCC_IT_LSIRDY ((uint8_t)0x01)
|
|
#define RCC_IT_LSERDY ((uint8_t)0x02)
|
|
#define RCC_IT_HSIRDY ((uint8_t)0x04)
|
|
#define RCC_IT_HSERDY ((uint8_t)0x08)
|
|
#define RCC_IT_PLLRDY ((uint8_t)0x10)
|
|
#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
|
|
#define RCC_IT_CSS ((uint8_t)0x80)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_Flag Flags
|
|
* Elements values convention: 0XXYYYYYb
|
|
* - YYYYY : Flag position in the register
|
|
* - 0XX : Register index
|
|
* - 01: CR register
|
|
* - 10: BDCR register
|
|
* - 11: CSR register
|
|
* @{
|
|
*/
|
|
/* Flags in the CR register */
|
|
#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
|
|
#define RCC_FLAG_HSERDY ((uint8_t)0x31)
|
|
#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
|
|
#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
|
|
|
|
/* Flags in the BDCR register */
|
|
#define RCC_FLAG_LSERDY ((uint8_t)0x41)
|
|
|
|
/* Flags in the CSR register */
|
|
#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
|
|
#define RCC_FLAG_BORRST ((uint8_t)0x79)
|
|
#define RCC_FLAG_PINRST ((uint8_t)0x7A)
|
|
#define RCC_FLAG_PORRST ((uint8_t)0x7B)
|
|
#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
|
|
#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
|
|
#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
|
|
#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup RCC_Exported_Macros RCC Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOA_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOAEN))
|
|
#define __HAL_RCC_GPIOB_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOBEN))
|
|
#define __HAL_RCC_GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN))
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN))
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CCMDATARAMEN))
|
|
#define __HAL_RCC_DMA1_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA1EN))
|
|
#define __HAL_RCC_DMA2_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2EN))
|
|
|
|
#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
|
|
#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
|
|
#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
|
|
#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
|
|
#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_DISABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_RNGEN))
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_TIM5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN))
|
|
#define __HAL_RCC_WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
|
|
#define __HAL_RCC_SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
|
|
#define __HAL_RCC_I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
|
|
#define __HAL_RCC_I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
|
|
#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
|
|
#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
|
|
#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
|
|
#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
|
|
#define __HAL_RCC_USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
|
|
#define __HAL_RCC_USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
|
|
#define __HAL_RCC_ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
|
|
#define __HAL_RCC_TIM9_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM9EN))
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM11_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM11EN))
|
|
|
|
#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
|
|
#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
|
|
#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
|
|
#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
|
|
#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
|
|
#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
|
|
#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
|
|
#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
|
|
|
|
#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00)
|
|
#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
|
|
#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
|
|
#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
|
|
#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
|
|
#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00)
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
|
|
#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
|
|
#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
|
|
#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
|
|
#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
|
|
|
|
#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
|
|
#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
|
|
#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
|
|
#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
|
|
#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
|
|
#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
|
|
#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
|
|
#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
|
|
#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
|
|
|
|
#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
|
|
#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
|
|
#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
|
|
#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
|
|
#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
|
|
#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
|
|
#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
|
|
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
|
|
#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
|
|
|
|
#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
|
|
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
|
|
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
|
|
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
|
|
#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
|
|
#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
|
|
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
|
|
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
|
|
#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
|
|
#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
|
|
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
|
|
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
|
|
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
|
|
#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
|
|
#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
|
|
#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
|
|
|
|
#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
|
|
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
|
|
#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
|
|
#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
|
|
#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_HSI_Configuration HSI Configuration
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
|
|
* @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
|
|
* It is used (enabled by hardware) as system clock source after startup
|
|
* from Reset, wake-up from STOP and STANDBY mode, or in case of failure
|
|
* of the HSE used directly or indirectly as system clock (if the Clock
|
|
* Security System CSS is enabled).
|
|
* @note HSI can not be stopped if it is used as system clock source. In this case,
|
|
* you have to select another source of the system clock then stop the HSI.
|
|
* @note After enabling the HSI, the application software should wait on HSIRDY
|
|
* flag to be set indicating that HSI clock is stable and can be used as
|
|
* system clock source.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
|
|
* clock cycles.
|
|
*/
|
|
#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
|
|
#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
|
|
|
|
/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
|
|
* @note The calibration is used to compensate for the variations in voltage
|
|
* and temperature that influence the frequency of the internal HSI RC.
|
|
* @param __HSICalibrationValue__: specifies the calibration trimming value.
|
|
* This parameter must be a number between 0 and 0x1F.
|
|
*/
|
|
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
|
|
RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LSI_Configuration LSI Configuration
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
|
|
* @note After enabling the LSI, the application software should wait on
|
|
* LSIRDY flag to be set indicating that LSI clock is stable and can
|
|
* be used to clock the IWDG and/or the RTC.
|
|
* @note LSI can not be disabled if the IWDG is running.
|
|
* @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
|
|
* clock cycles.
|
|
*/
|
|
#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
|
|
#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_HSE_Configuration HSE Configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Macro to configure the External High Speed oscillator (HSE).
|
|
* @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
|
|
* software should wait on HSERDY flag to be set indicating that HSE clock
|
|
* is stable and can be used to clock the PLL and/or system clock.
|
|
* @note HSE state can not be changed if it is used directly or through the
|
|
* PLL as system clock. In this case, you have to select another source
|
|
* of the system clock then change the HSE state (ex. disable it).
|
|
* @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
|
|
* @note This function reset the CSSON bit, so if the clock security system(CSS)
|
|
* was previously enabled you have to enable it again after calling this
|
|
* function.
|
|
* @param __STATE__: specifies the new state of the HSE.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
|
|
* 6 HSE oscillator clock cycles.
|
|
* @arg RCC_HSE_ON: turn ON the HSE oscillator.
|
|
* @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
|
|
*/
|
|
#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_CR_BYTE2_ADDRESS = (__STATE__))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LSE_Configuration LSE Configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Macro to configure the External Low Speed oscillator (LSE).
|
|
* @note As the LSE is in the Backup domain and write access is denied to
|
|
* this domain after reset, you have to enable write access using
|
|
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
|
|
* (to be done once after reset).
|
|
* @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
|
|
* software should wait on LSERDY flag to be set indicating that LSE clock
|
|
* is stable and can be used to clock the RTC.
|
|
* @param __STATE__: specifies the new state of the LSE.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
|
|
* 6 LSE oscillator clock cycles.
|
|
* @arg RCC_LSE_ON: turn ON the LSE oscillator.
|
|
* @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
|
|
*/
|
|
#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_BDCR_BYTE0_ADDRESS = (__STATE__))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Macros to enable or disable the RTC clock.
|
|
* @note These macros must be used only after the RTC clock source was selected.
|
|
*/
|
|
#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
|
|
#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
|
|
|
|
/** @brief Macros to configure the RTC clock (RTCCLK).
|
|
* @note As the RTC clock configuration bits are in the Backup domain and write
|
|
* access is denied to this domain after reset, you have to enable write
|
|
* access using the Power Backup Access macro before to configure
|
|
* the RTC clock source (to be done once after reset).
|
|
* @note Once the RTC clock is configured it can't be changed unless the
|
|
* Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
|
|
* a Power On Reset (POR).
|
|
* @param __RTCCLKSource__: specifies the RTC clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
|
|
* @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
|
|
* @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
|
|
* as RTC clock, where x:[2,31]
|
|
* @note If the LSE or LSI is used as RTC clock source, the RTC continues to
|
|
* work in STOP and STANDBY modes, and can be used as wake-up source.
|
|
* However, when the HSE clock is used as RTC clock source, the RTC
|
|
* cannot be used in STOP and STANDBY modes.
|
|
* @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
|
|
* RTC clock source).
|
|
*/
|
|
#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
|
|
|
|
#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
|
|
RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
|
|
} while (0)
|
|
|
|
/** @brief Macros to force or release the Backup domain reset.
|
|
* @note This function resets the RTC peripheral (including the backup registers)
|
|
* and the RTC clock source selection in RCC_CSR register.
|
|
* @note The BKPSRAM is not affected by this reset.
|
|
*/
|
|
#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
|
|
#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_PLL_Configuration PLL Configuration
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Macros to enable or disable the main PLL.
|
|
* @note After enabling the main PLL, the application software should wait on
|
|
* PLLRDY flag to be set indicating that PLL clock is stable and can
|
|
* be used as system clock source.
|
|
* @note The main PLL can not be disabled if it is used as system clock source
|
|
* @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
|
|
*/
|
|
#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
|
|
#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
|
|
|
|
/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
|
|
* @note This function must be used only when the main PLL is disabled.
|
|
* @param __RCC_PLLSource__: specifies the PLL entry clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
|
|
* @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
|
|
* @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
|
|
* @param __PLLM__: specifies the division factor for PLL VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note You have to set the PLLM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 2 MHz to limit PLL jitter.
|
|
* @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
|
|
* This parameter must be a number between Min_Data = 192 and Max_Data = 432.
|
|
* @note You have to set the PLLN parameter correctly to ensure that the VCO
|
|
* output frequency is between 192 and 432 MHz.
|
|
* @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
|
|
* This parameter must be a number in the range {2, 4, 6, or 8}.
|
|
* @note You have to set the PLLP parameter correctly to not exceed 168 MHz on
|
|
* the System clock frequency.
|
|
* @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
* @note If the USB OTG FS is used in your application, you have to set the
|
|
* PLLQ parameter correctly to have 48 MHz clock for the USB. However,
|
|
* the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
|
|
* correctly.
|
|
*/
|
|
#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__)\
|
|
(RCC->PLLCFGR = (0x20000000 | (__PLLM__) | ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
|
|
((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | (__RCC_PLLSource__) | \
|
|
((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Macro to configure the I2S clock source (I2SCLK).
|
|
* @note This function must be called before enabling the I2S APB clock.
|
|
* @param __SOURCE__: specifies the I2S clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
|
|
* @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
|
|
* used as I2S clock source.
|
|
*/
|
|
#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__))
|
|
|
|
/** @brief Macros to enable or disable the PLLI2S.
|
|
* @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
|
|
#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
|
|
|
|
/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API).
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
|
|
* This parameter must be a number between Min_Data = 192 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) | ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_Get_Clock_source Get Clock source
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Macro to get the clock source used as system clock.
|
|
* @retval The clock source used as system clock. The returned value can be one
|
|
* of the following:
|
|
* - RCC_CFGR_SWS_HSI: HSI used as system clock.
|
|
* - RCC_CFGR_SWS_HSE: HSE used as system clock.
|
|
* - RCC_CFGR_SWS_PLL: PLL used as system clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
|
|
|
|
/** @brief Macro to get the oscillator used as PLL clock source.
|
|
* @retval The oscillator used as PLL clock source. The returned value can be one
|
|
* of the following:
|
|
* - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
|
|
* - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
|
|
*/
|
|
#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
|
|
* @brief macros to manage the specified RCC Flags and interrupts.
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
|
|
* the selected interrupts).
|
|
* @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
|
|
* @arg RCC_IT_LSERDY: LSE ready interrupt.
|
|
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
|
|
* @arg RCC_IT_HSERDY: HSE ready interrupt.
|
|
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
|
|
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
|
|
*/
|
|
#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
|
|
|
|
/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
|
|
* the selected interrupts).
|
|
* @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
|
|
* @arg RCC_IT_LSERDY: LSE ready interrupt.
|
|
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
|
|
* @arg RCC_IT_HSERDY: HSE ready interrupt.
|
|
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
|
|
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
|
|
*/
|
|
#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
|
|
|
|
/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
|
|
* bits to clear the selected interrupt pending bits.
|
|
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
|
|
* @arg RCC_IT_LSERDY: LSE ready interrupt.
|
|
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
|
|
* @arg RCC_IT_HSERDY: HSE ready interrupt.
|
|
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
|
|
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
|
|
* @arg RCC_IT_CSS: Clock Security System interrupt
|
|
*/
|
|
#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
|
|
|
|
/** @brief Check the RCC's interrupt has occurred or not.
|
|
* @param __INTERRUPT__: specifies the RCC interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
|
|
* @arg RCC_IT_LSERDY: LSE ready interrupt.
|
|
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
|
|
* @arg RCC_IT_HSERDY: HSE ready interrupt.
|
|
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
|
|
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
|
|
* @arg RCC_IT_CSS: Clock Security System interrupt
|
|
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
|
|
|
|
/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
|
|
* RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
|
|
*/
|
|
#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
|
|
|
|
/** @brief Check RCC flag is set or not.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
|
|
* @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
|
|
* @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
|
|
* @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
|
|
* @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
|
|
* @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
|
|
* @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
|
|
* @arg RCC_FLAG_PINRST: Pin reset.
|
|
* @arg RCC_FLAG_PORRST: POR/PDR reset.
|
|
* @arg RCC_FLAG_SFTRST: Software reset.
|
|
* @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
|
|
* @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
|
|
* @arg RCC_FLAG_LPWRRST: Low Power reset.
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define RCC_FLAG_MASK ((uint8_t)0x1F)
|
|
#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include RCC HAL Extension module */
|
|
#include "stm32f4xx_hal_rcc_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup RCC_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCC_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
/* Initialization and de-initialization functions ******************************/
|
|
void HAL_RCC_DeInit(void);
|
|
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
|
|
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup RCC_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
/* Peripheral Control functions ************************************************/
|
|
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
|
|
void HAL_RCC_EnableCSS(void);
|
|
void HAL_RCC_DisableCSS(void);
|
|
uint32_t HAL_RCC_GetSysClockFreq(void);
|
|
uint32_t HAL_RCC_GetHCLKFreq(void);
|
|
uint32_t HAL_RCC_GetPCLK1Freq(void);
|
|
uint32_t HAL_RCC_GetPCLK2Freq(void);
|
|
void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
|
|
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
|
|
|
|
/* CSS NMI IRQ handler */
|
|
void HAL_RCC_NMI_IRQHandler(void);
|
|
|
|
/* User Callbacks in non blocking mode (IT mode) */
|
|
void HAL_RCC_CSSCallback(void);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup RCC_Private_Constants RCC Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
|
|
* @brief RCC registers bit address in the alias region
|
|
* @{
|
|
*/
|
|
#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
|
|
/* --- CR Register ---*/
|
|
/* Alias word address of HSION bit */
|
|
#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
|
|
#define RCC_HSION_BIT_NUMBER 0x00
|
|
#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_HSION_BIT_NUMBER * 4))
|
|
/* Alias word address of CSSON bit */
|
|
#define RCC_CSSON_BIT_NUMBER 0x13
|
|
#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_CSSON_BIT_NUMBER * 4))
|
|
/* Alias word address of PLLON bit */
|
|
#define RCC_PLLON_BIT_NUMBER 0x18
|
|
#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLON_BIT_NUMBER * 4))
|
|
/* Alias word address of PLLI2SON bit */
|
|
#define RCC_PLLI2SON_BIT_NUMBER 0x1A
|
|
#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4))
|
|
|
|
/* --- CFGR Register ---*/
|
|
/* Alias word address of I2SSRC bit */
|
|
#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08)
|
|
#define RCC_I2SSRC_BIT_NUMBER 0x17
|
|
#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4))
|
|
|
|
/* --- BDCR Register ---*/
|
|
/* Alias word address of RTCEN bit */
|
|
#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70)
|
|
#define RCC_RTCEN_BIT_NUMBER 0x0F
|
|
#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_RTCEN_BIT_NUMBER * 4))
|
|
/* Alias word address of BDRST bit */
|
|
#define RCC_BDRST_BIT_NUMBER 0x10
|
|
#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_BDRST_BIT_NUMBER * 4))
|
|
|
|
/* --- CSR Register ---*/
|
|
/* Alias word address of LSION bit */
|
|
#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74)
|
|
#define RCC_LSION_BIT_NUMBER 0x00
|
|
#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RCC_LSION_BIT_NUMBER * 4))
|
|
|
|
/* CR register byte 3 (Bits[23:16]) base address */
|
|
#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802)
|
|
|
|
/* CIR register byte 2 (Bits[15:8]) base address */
|
|
#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
|
|
|
|
/* CIR register byte 3 (Bits[23:16]) base address */
|
|
#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
|
|
|
|
/* BDCR register base address */
|
|
#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
|
|
|
|
#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100)
|
|
#define RCC_LSE_TIMEOUT_VALUE ((uint32_t)5000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @addtogroup RCC_Private_Macros RCC Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
|
|
|
|
#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
|
|
((HSE) == RCC_HSE_BYPASS))
|
|
|
|
#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
|
|
((LSE) == RCC_LSE_BYPASS))
|
|
|
|
#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
|
|
|
|
#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
|
|
|
|
#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
|
|
|
|
#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
|
|
((SOURCE) == RCC_PLLSOURCE_HSE))
|
|
|
|
#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
|
|
((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
|
|
((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
|
|
#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
|
|
|
|
#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
|
|
|
|
#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
|
|
|
|
#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
|
|
|
|
#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
|
|
|
|
#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
|
|
|
|
#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
|
|
((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
|
|
((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
|
|
((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
|
|
((HCLK) == RCC_SYSCLK_DIV512))
|
|
|
|
#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
|
|
|
|
#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
|
|
((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
|
|
((PCLK) == RCC_HCLK_DIV16))
|
|
|
|
#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
|
|
|
|
#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
|
|
((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
|
|
|
|
#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
|
|
((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
|
|
|
|
#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
|
|
((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
|
|
((DIV) == RCC_MCODIV_5))
|
|
#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F4xx_HAL_RCC_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|