You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
397 lines
28 KiB
397 lines
28 KiB
/*!
|
|
\file gd32vf103_adc.h
|
|
\brief definitions for the ADC
|
|
|
|
\version 2019-06-05, V1.0.0, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef GD32VF103_ADC_H
|
|
#define GD32VF103_ADC_H
|
|
|
|
#include "gd32vf103.h"
|
|
|
|
/* ADC definitions */
|
|
#define ADC0 ADC_BASE
|
|
#define ADC1 (ADC_BASE + 0x400U)
|
|
|
|
/* registers definitions */
|
|
#define ADC_STAT(adcx) REG32((adcx) + 0x00U) /*!< ADC status register */
|
|
#define ADC_CTL0(adcx) REG32((adcx) + 0x04U) /*!< ADC control register 0 */
|
|
#define ADC_CTL1(adcx) REG32((adcx) + 0x08U) /*!< ADC control register 1 */
|
|
#define ADC_SAMPT0(adcx) REG32((adcx) + 0x0CU) /*!< ADC sampling time register 0 */
|
|
#define ADC_SAMPT1(adcx) REG32((adcx) + 0x10U) /*!< ADC sampling time register 1 */
|
|
#define ADC_IOFF0(adcx) REG32((adcx) + 0x14U) /*!< ADC inserted channel data offset register 0 */
|
|
#define ADC_IOFF1(adcx) REG32((adcx) + 0x18U) /*!< ADC inserted channel data offset register 1 */
|
|
#define ADC_IOFF2(adcx) REG32((adcx) + 0x1CU) /*!< ADC inserted channel data offset register 2 */
|
|
#define ADC_IOFF3(adcx) REG32((adcx) + 0x20U) /*!< ADC inserted channel data offset register 3 */
|
|
#define ADC_WDHT(adcx) REG32((adcx) + 0x24U) /*!< ADC watchdog high threshold register */
|
|
#define ADC_WDLT(adcx) REG32((adcx) + 0x28U) /*!< ADC watchdog low threshold register */
|
|
#define ADC_RSQ0(adcx) REG32((adcx) + 0x2CU) /*!< ADC regular sequence register 0 */
|
|
#define ADC_RSQ1(adcx) REG32((adcx) + 0x30U) /*!< ADC regular sequence register 1 */
|
|
#define ADC_RSQ2(adcx) REG32((adcx) + 0x34U) /*!< ADC regular sequence register 2 */
|
|
#define ADC_ISQ(adcx) REG32((adcx) + 0x38U) /*!< ADC inserted sequence register */
|
|
#define ADC_IDATA0(adcx) REG32((adcx) + 0x3CU) /*!< ADC inserted data register 0 */
|
|
#define ADC_IDATA1(adcx) REG32((adcx) + 0x40U) /*!< ADC inserted data register 1 */
|
|
#define ADC_IDATA2(adcx) REG32((adcx) + 0x44U) /*!< ADC inserted data register 2 */
|
|
#define ADC_IDATA3(adcx) REG32((adcx) + 0x48U) /*!< ADC inserted data register 3 */
|
|
#define ADC_RDATA(adcx) REG32((adcx) + 0x4CU) /*!< ADC regular data register */
|
|
#define ADC_OVSCR(adcx) REG32((adcx) + 0x80U) /*!< ADC oversample control register */
|
|
|
|
/* bits definitions */
|
|
/* ADC_STAT */
|
|
#define ADC_STAT_WDE BIT(0) /*!< analog watchdog event flag */
|
|
#define ADC_STAT_EOC BIT(1) /*!< end of conversion */
|
|
#define ADC_STAT_EOIC BIT(2) /*!< inserted channel end of conversion */
|
|
#define ADC_STAT_STIC BIT(3) /*!< inserted channel start flag */
|
|
#define ADC_STAT_STRC BIT(4) /*!< regular channel start flag */
|
|
|
|
/* ADC_CTL0 */
|
|
#define ADC_CTL0_WDCHSEL BITS(0,4) /*!< analog watchdog channel select bits */
|
|
#define ADC_CTL0_EOCIE BIT(5) /*!< interrupt enable for EOC */
|
|
#define ADC_CTL0_WDEIE BIT(6) /*!< analog watchdog interrupt enable */
|
|
#define ADC_CTL0_EOICIE BIT(7) /*!< interrupt enable for inserted channels */
|
|
#define ADC_CTL0_SM BIT(8) /*!< scan mode */
|
|
#define ADC_CTL0_WDSC BIT(9) /*!< when in scan mode, analog watchdog is effective on a single channel */
|
|
#define ADC_CTL0_ICA BIT(10) /*!< automatic inserted group conversion */
|
|
#define ADC_CTL0_DISRC BIT(11) /*!< discontinuous mode on regular channels */
|
|
#define ADC_CTL0_DISIC BIT(12) /*!< discontinuous mode on inserted channels */
|
|
#define ADC_CTL0_DISNUM BITS(13,15) /*!< discontinuous mode channel count */
|
|
#define ADC_CTL0_SYNCM BITS(16,19) /*!< sync mode selection */
|
|
#define ADC_CTL0_IWDEN BIT(22) /*!< analog watchdog enable on inserted channels */
|
|
#define ADC_CTL0_RWDEN BIT(23) /*!< analog watchdog enable on regular channels */
|
|
|
|
/* ADC_CTL1 */
|
|
#define ADC_CTL1_ADCON BIT(0) /*!< ADC converter on */
|
|
#define ADC_CTL1_CTN BIT(1) /*!< continuous conversion */
|
|
#define ADC_CTL1_CLB BIT(2) /*!< ADC calibration */
|
|
#define ADC_CTL1_RSTCLB BIT(3) /*!< reset calibration */
|
|
#define ADC_CTL1_DMA BIT(8) /*!< direct memory access mode */
|
|
#define ADC_CTL1_DAL BIT(11) /*!< data alignment */
|
|
#define ADC_CTL1_ETSIC BITS(12,14) /*!< external trigger select for inserted channel */
|
|
#define ADC_CTL1_ETEIC BIT(15) /*!< external trigger enable for inserted channel */
|
|
#define ADC_CTL1_ETSRC BITS(17,19) /*!< external trigger select for regular channel */
|
|
#define ADC_CTL1_ETERC BIT(20) /*!< external trigger conversion mode for inserted channels */
|
|
#define ADC_CTL1_SWICST BIT(21) /*!< start on inserted channel */
|
|
#define ADC_CTL1_SWRCST BIT(22) /*!< start on regular channel */
|
|
#define ADC_CTL1_TSVREN BIT(23) /*!< channel 16 and 17 enable of ADC0 */
|
|
|
|
/* ADC_SAMPTx x=0..1 */
|
|
#define ADC_SAMPTX_SPTN BITS(0,2) /*!< channel n sample time selection */
|
|
|
|
/* ADC_IOFFx x=0..3 */
|
|
#define ADC_IOFFX_IOFF BITS(0,11) /*!< data offset for inserted channel x */
|
|
|
|
/* ADC_WDHT */
|
|
#define ADC_WDHT_WDHT BITS(0,11) /*!< analog watchdog high threshold */
|
|
|
|
/* ADC_WDLT */
|
|
#define ADC_WDLT_WDLT BITS(0,11) /*!< analog watchdog low threshold */
|
|
|
|
/* ADC_RSQx x=0..2 */
|
|
#define ADC_RSQX_RSQN BITS(0,4) /*!< nth conversion in regular sequence */
|
|
#define ADC_RSQ0_RL BITS(20,23) /*!< regular channel sequence length */
|
|
|
|
/* ADC_ISQ */
|
|
#define ADC_ISQ_ISQN BITS(0,4) /*!< nth conversion in inserted sequence */
|
|
#define ADC_ISQ_IL BITS(20,21) /*!< inserted sequence length */
|
|
|
|
/* ADC_IDATAx x=0..3*/
|
|
#define ADC_IDATAX_IDATAN BITS(0,15) /*!< inserted data n */
|
|
|
|
/* ADC_RDATA */
|
|
#define ADC_RDATA_RDATA BITS(0,15) /*!< regular data */
|
|
#define ADC_RDATA_ADC1RDTR BITS(16,31) /*!< ADC1 regular channel data */
|
|
|
|
/* ADC_OVSCR */
|
|
#define ADC_OVSCR_OVSEN BIT(0) /*!< oversampling enable */
|
|
#define ADC_OVSCR_OVSR BITS(2,4) /*!< oversampling ratio */
|
|
#define ADC_OVSCR_OVSS BITS(5,8) /*!< oversampling shift */
|
|
#define ADC_OVSCR_TOVS BIT(9) /*!< triggered oversampling */
|
|
#define ADC_OVSCR_DRES BITS(12,13) /*!< ADC data resolution */
|
|
|
|
/* constants definitions */
|
|
/* adc_stat register value */
|
|
#define ADC_FLAG_WDE ADC_STAT_WDE /*!< analog watchdog event flag */
|
|
#define ADC_FLAG_EOC ADC_STAT_EOC /*!< end of conversion */
|
|
#define ADC_FLAG_EOIC ADC_STAT_EOIC /*!< inserted channel end of conversion */
|
|
#define ADC_FLAG_STIC ADC_STAT_STIC /*!< inserted channel start flag */
|
|
#define ADC_FLAG_STRC ADC_STAT_STRC /*!< regular channel start flag */
|
|
|
|
/* adc_ctl0 register value */
|
|
#define CTL0_DISNUM(regval) (BITS(13,15) & ((uint32_t)(regval) << 13)) /*!< write value to ADC_CTL0_DISNUM bit field */
|
|
|
|
/* scan mode */
|
|
#define ADC_SCAN_MODE ADC_CTL0_SM /*!< scan mode */
|
|
|
|
/* inserted channel group convert automatically */
|
|
#define ADC_INSERTED_CHANNEL_AUTO ADC_CTL0_ICA /*!< inserted channel group convert automatically */
|
|
|
|
/* ADC sync mode */
|
|
#define CTL0_SYNCM(regval) (BITS(16,19) & ((uint32_t)(regval) << 16)) /*!< write value to ADC_CTL0_SYNCM bit field */
|
|
#define ADC_MODE_FREE CTL0_SYNCM(0) /*!< all the ADCs work independently */
|
|
#define ADC_DAUL_REGULAL_PARALLEL_INSERTED_PARALLEL CTL0_SYNCM(1) /*!< ADC0 and ADC1 work in combined regular parallel + inserted parallel mode */
|
|
#define ADC_DAUL_REGULAL_PARALLEL_INSERTED_ROTATION CTL0_SYNCM(2) /*!< ADC0 and ADC1 work in combined regular parallel + trigger rotation mode */
|
|
#define ADC_DAUL_INSERTED_PARALLEL_REGULAL_FOLLOWUP_FAST CTL0_SYNCM(3) /*!< ADC0 and ADC1 work in combined inserted parallel + follow-up fast mode */
|
|
#define ADC_DAUL_INSERTED_PARALLEL_REGULAL_FOLLOWUP_SLOW CTL0_SYNCM(4) /*!< ADC0 and ADC1 work in combined inserted parallel + follow-up slow mode */
|
|
#define ADC_DAUL_INSERTED_PARALLEL CTL0_SYNCM(5) /*!< ADC0 and ADC1 work in inserted parallel mode only */
|
|
#define ADC_DAUL_REGULAL_PARALLEL CTL0_SYNCM(6) /*!< ADC0 and ADC1 work in regular parallel mode only */
|
|
#define ADC_DAUL_REGULAL_FOLLOWUP_FAST CTL0_SYNCM(7) /*!< ADC0 and ADC1 work in follow-up fast mode only */
|
|
#define ADC_DAUL_REGULAL_FOLLOWUP_SLOW CTL0_SYNCM(8) /*!< ADC0 and ADC1 work in follow-up slow mode only */
|
|
#define ADC_DAUL_INSERTED_TRIGGER_ROTATION CTL0_SYNCM(9) /*!< ADC0 and ADC1 work in trigger rotation mode only */
|
|
|
|
/* adc_ctl1 register value */
|
|
#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000U) /*!< LSB alignment */
|
|
#define ADC_DATAALIGN_LEFT ADC_CTL1_DAL /*!< MSB alignment */
|
|
|
|
/* continuous mode */
|
|
#define ADC_CONTINUOUS_MODE ADC_CTL1_CTN /*!< continuous mode */
|
|
|
|
/* external trigger select for regular channel */
|
|
#define CTL1_ETSRC(regval) (BITS(17,19) & ((uint32_t)(regval) << 17)) /*!< write value to ADC_CTL1_ETSRC bit field */
|
|
/* for ADC0 and ADC1 regular channel */
|
|
#define ADC0_1_EXTTRIG_REGULAR_T0_CH0 CTL1_ETSRC(0) /*!< TIMER0 CH0 event select */
|
|
#define ADC0_1_EXTTRIG_REGULAR_T0_CH1 CTL1_ETSRC(1) /*!< TIMER0 CH1 event select */
|
|
#define ADC0_1_EXTTRIG_REGULAR_T0_CH2 CTL1_ETSRC(2) /*!< TIMER0 CH2 event select */
|
|
#define ADC0_1_EXTTRIG_REGULAR_T1_CH1 CTL1_ETSRC(3) /*!< TIMER1 CH1 event select */
|
|
#define ADC0_1_EXTTRIG_REGULAR_T2_TRGO CTL1_ETSRC(4) /*!< TIMER2 TRGO event select */
|
|
#define ADC0_1_EXTTRIG_REGULAR_T3_CH3 CTL1_ETSRC(5) /*!< TIMER3 CH3 event select */
|
|
#define ADC0_1_EXTTRIG_REGULAR_EXTI_11 CTL1_ETSRC(6) /*!< external interrupt line 11 */
|
|
#define ADC0_1_EXTTRIG_REGULAR_NONE CTL1_ETSRC(7) /*!< software trigger */
|
|
|
|
/* external trigger mode for inserted channel */
|
|
#define CTL1_ETSIC(regval) (BITS(12,14) & ((uint32_t)(regval) << 12)) /*!< write value to ADC_CTL1_ETSIC bit field */
|
|
/* for ADC0 and ADC1 inserted channel */
|
|
#define ADC0_1_EXTTRIG_INSERTED_T0_TRGO CTL1_ETSIC(0) /*!< TIMER0 TRGO event select */
|
|
#define ADC0_1_EXTTRIG_INSERTED_T0_CH3 CTL1_ETSIC(1) /*!< TIMER0 CH3 event select */
|
|
#define ADC0_1_EXTTRIG_INSERTED_T1_TRGO CTL1_ETSIC(2) /*!< TIMER1 TRGO event select */
|
|
#define ADC0_1_EXTTRIG_INSERTED_T1_CH0 CTL1_ETSIC(3) /*!< TIMER1 CH0 event select */
|
|
#define ADC0_1_EXTTRIG_INSERTED_T2_CH3 CTL1_ETSIC(4) /*!< TIMER2 CH3 event select */
|
|
#define ADC0_1_EXTTRIG_INSERTED_T3_TRGO CTL1_ETSIC(5) /*!< TIMER3 TRGO event select */
|
|
#define ADC0_1_EXTTRIG_INSERTED_EXTI_15 CTL1_ETSIC(6) /*!< external interrupt line 15 */
|
|
#define ADC0_1_EXTTRIG_INSERTED_NONE CTL1_ETSIC(7) /*!< software trigger */
|
|
|
|
/* adc_samptx register value */
|
|
#define SAMPTX_SPT(regval) (BITS(0,2) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_SAMPTX_SPT bit field */
|
|
#define ADC_SAMPLETIME_1POINT5 SAMPTX_SPT(0) /*!< 1.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_7POINT5 SAMPTX_SPT(1) /*!< 7.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_13POINT5 SAMPTX_SPT(2) /*!< 13.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_28POINT5 SAMPTX_SPT(3) /*!< 28.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_41POINT5 SAMPTX_SPT(4) /*!< 41.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_55POINT5 SAMPTX_SPT(5) /*!< 55.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_71POINT5 SAMPTX_SPT(6) /*!< 71.5 sampling cycles */
|
|
#define ADC_SAMPLETIME_239POINT5 SAMPTX_SPT(7) /*!< 239.5 sampling cycles */
|
|
|
|
/* adc_ioffx register value */
|
|
#define IOFFX_IOFF(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_IOFFX_IOFF bit field */
|
|
|
|
/* adc_wdht register value */
|
|
#define WDHT_WDHT(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_WDHT_WDHT bit field */
|
|
|
|
/* adc_wdlt register value */
|
|
#define WDLT_WDLT(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_WDLT_WDLT bit field */
|
|
|
|
/* adc_rsqx register value */
|
|
#define RSQ0_RL(regval) (BITS(20,23) & ((uint32_t)(regval) << 20)) /*!< write value to ADC_RSQ0_RL bit field */
|
|
|
|
/* adc_isq register value */
|
|
#define ISQ_IL(regval) (BITS(20,21) & ((uint32_t)(regval) << 20)) /*!< write value to ADC_ISQ_IL bit field */
|
|
|
|
/* ADC channel group definitions */
|
|
#define ADC_REGULAR_CHANNEL ((uint8_t)0x01U) /*!< adc regular channel group */
|
|
#define ADC_INSERTED_CHANNEL ((uint8_t)0x02U) /*!< adc inserted channel group */
|
|
#define ADC_REGULAR_INSERTED_CHANNEL ((uint8_t)0x03U) /*!< both regular and inserted channel group */
|
|
|
|
#define ADC_CHANNEL_DISCON_DISABLE ((uint8_t)0x04U) /*!< disable discontinuous mode of regular & inserted channel */
|
|
|
|
/* ADC inserted channel definitions */
|
|
#define ADC_INSERTED_CHANNEL_0 ((uint8_t)0x00U) /*!< adc inserted channel 0 */
|
|
#define ADC_INSERTED_CHANNEL_1 ((uint8_t)0x01U) /*!< adc inserted channel 1 */
|
|
#define ADC_INSERTED_CHANNEL_2 ((uint8_t)0x02U) /*!< adc inserted channel 2 */
|
|
#define ADC_INSERTED_CHANNEL_3 ((uint8_t)0x03U) /*!< adc inserted channel 3 */
|
|
|
|
/* ADC channel definitions */
|
|
#define ADC_CHANNEL_0 ((uint8_t)0x00U) /*!< ADC channel 0 */
|
|
#define ADC_CHANNEL_1 ((uint8_t)0x01U) /*!< ADC channel 1 */
|
|
#define ADC_CHANNEL_2 ((uint8_t)0x02U) /*!< ADC channel 2 */
|
|
#define ADC_CHANNEL_3 ((uint8_t)0x03U) /*!< ADC channel 3 */
|
|
#define ADC_CHANNEL_4 ((uint8_t)0x04U) /*!< ADC channel 4 */
|
|
#define ADC_CHANNEL_5 ((uint8_t)0x05U) /*!< ADC channel 5 */
|
|
#define ADC_CHANNEL_6 ((uint8_t)0x06U) /*!< ADC channel 6 */
|
|
#define ADC_CHANNEL_7 ((uint8_t)0x07U) /*!< ADC channel 7 */
|
|
#define ADC_CHANNEL_8 ((uint8_t)0x08U) /*!< ADC channel 8 */
|
|
#define ADC_CHANNEL_9 ((uint8_t)0x09U) /*!< ADC channel 9 */
|
|
#define ADC_CHANNEL_10 ((uint8_t)0x0AU) /*!< ADC channel 10 */
|
|
#define ADC_CHANNEL_11 ((uint8_t)0x0BU) /*!< ADC channel 11 */
|
|
#define ADC_CHANNEL_12 ((uint8_t)0x0CU) /*!< ADC channel 12 */
|
|
#define ADC_CHANNEL_13 ((uint8_t)0x0DU) /*!< ADC channel 13 */
|
|
#define ADC_CHANNEL_14 ((uint8_t)0x0EU) /*!< ADC channel 14 */
|
|
#define ADC_CHANNEL_15 ((uint8_t)0x0FU) /*!< ADC channel 15 */
|
|
#define ADC_CHANNEL_16 ((uint8_t)0x10U) /*!< ADC channel 16 */
|
|
#define ADC_CHANNEL_17 ((uint8_t)0x11U) /*!< ADC channel 17 */
|
|
|
|
/* ADC interrupt */
|
|
#define ADC_INT_WDE ADC_STAT_WDE /*!< analog watchdog event interrupt */
|
|
#define ADC_INT_EOC ADC_STAT_EOC /*!< end of group conversion interrupt */
|
|
#define ADC_INT_EOIC ADC_STAT_EOIC /*!< end of inserted group conversion interrupt */
|
|
|
|
/* ADC interrupt flag */
|
|
#define ADC_INT_FLAG_WDE ADC_STAT_WDE /*!< analog watchdog event interrupt flag */
|
|
#define ADC_INT_FLAG_EOC ADC_STAT_EOC /*!< end of group conversion interrupt flag */
|
|
#define ADC_INT_FLAG_EOIC ADC_STAT_EOIC /*!< end of inserted group conversion interrupt flag */
|
|
|
|
/* ADC resolution definitions */
|
|
#define OVSCR_DRES(regval) (BITS(12,13) & ((uint32_t)(regval) << 12))
|
|
#define ADC_RESOLUTION_12B OVSCR_DRES(0) /*!< 12-bit ADC resolution */
|
|
#define ADC_RESOLUTION_10B OVSCR_DRES(1) /*!< 10-bit ADC resolution */
|
|
#define ADC_RESOLUTION_8B OVSCR_DRES(2) /*!< 8-bit ADC resolution */
|
|
#define ADC_RESOLUTION_6B OVSCR_DRES(3) /*!< 6-bit ADC resolution */
|
|
|
|
/* ADC oversampling mode */
|
|
#define ADC_OVERSAMPLING_ALL_CONVERT 0 /*!< all oversampled conversions for a channel are done consecutively after a trigger */
|
|
#define ADC_OVERSAMPLING_ONE_CONVERT 1 /*!< each oversampled conversion for a channel needs a trigger */
|
|
|
|
/* ADC oversampling shift */
|
|
#define OVSCR_OVSS(regval) (BITS(5,8) & ((uint32_t)(regval) << 5))
|
|
#define ADC_OVERSAMPLING_SHIFT_NONE OVSCR_OVSS(0) /*!< no oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_1B OVSCR_OVSS(1) /*!< 1-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_2B OVSCR_OVSS(2) /*!< 2-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_3B OVSCR_OVSS(3) /*!< 3-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_4B OVSCR_OVSS(4) /*!< 4-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_5B OVSCR_OVSS(5) /*!< 5-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_6B OVSCR_OVSS(6) /*!< 6-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_7B OVSCR_OVSS(7) /*!< 7-bit oversampling shift */
|
|
#define ADC_OVERSAMPLING_SHIFT_8B OVSCR_OVSS(8) /*!< 8-bit oversampling shift */
|
|
|
|
/* ADC oversampling ratio */
|
|
#define OVSCR_OVSR(regval) (BITS(2,4) & ((uint32_t)(regval) << 2))
|
|
#define ADC_OVERSAMPLING_RATIO_MUL2 OVSCR_OVSR(0) /*!< oversampling ratio X2 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL4 OVSCR_OVSR(1) /*!< oversampling ratio X4 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL8 OVSCR_OVSR(2) /*!< oversampling ratio X8 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL16 OVSCR_OVSR(3) /*!< oversampling ratio X16 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL32 OVSCR_OVSR(4) /*!< oversampling ratio X32 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL64 OVSCR_OVSR(5) /*!< oversampling ratio X64 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL128 OVSCR_OVSR(6) /*!< oversampling ratio X128 */
|
|
#define ADC_OVERSAMPLING_RATIO_MUL256 OVSCR_OVSR(7) /*!< oversampling ratio X256 */
|
|
|
|
/* function declarations */
|
|
/* initialization config */
|
|
/* reset ADC */
|
|
void adc_deinit(uint32_t adc_periph);
|
|
/* configure the ADC sync mode */
|
|
void adc_mode_config(uint32_t mode);
|
|
/* enable or disable ADC special function */
|
|
void adc_special_function_config(uint32_t adc_periph, uint32_t function, ControlStatus newvalue);
|
|
/* configure ADC data alignment */
|
|
void adc_data_alignment_config(uint32_t adc_periph, uint32_t data_alignment);
|
|
/* enable ADC interface */
|
|
void adc_enable(uint32_t adc_periph);
|
|
/* disable ADC interface */
|
|
void adc_disable(uint32_t adc_periph);
|
|
/* ADC calibration and reset calibration */
|
|
void adc_calibration_enable(uint32_t adc_periph);
|
|
/* enable the temperature sensor and Vrefint channel */
|
|
void adc_tempsensor_vrefint_enable(void);
|
|
/* disable the temperature sensor and Vrefint channel */
|
|
void adc_tempsensor_vrefint_disable(void);
|
|
|
|
/* DMA config */
|
|
/* enable DMA request */
|
|
void adc_dma_mode_enable(uint32_t adc_periph);
|
|
/* disable DMA request */
|
|
void adc_dma_mode_disable(uint32_t adc_periph);
|
|
|
|
/* regular group and inserted group config */
|
|
/* configure ADC discontinuous mode */
|
|
void adc_discontinuous_mode_config(uint32_t adc_periph, uint8_t adc_channel_group, uint8_t length);
|
|
|
|
/* configure the length of regular channel group or inserted channel group */
|
|
void adc_channel_length_config(uint32_t adc_periph, uint8_t adc_channel_group, uint32_t length);
|
|
/* configure ADC regular channel */
|
|
void adc_regular_channel_config(uint32_t adc_periph, uint8_t rank, uint8_t adc_channel, uint32_t sample_time);
|
|
/* configure ADC inserted channel */
|
|
void adc_inserted_channel_config(uint32_t adc_periph, uint8_t rank, uint8_t adc_channel, uint32_t sample_time);
|
|
/* configure ADC inserted channel offset */
|
|
void adc_inserted_channel_offset_config(uint32_t adc_periph, uint8_t inserted_channel, uint16_t offset);
|
|
|
|
/* configure ADC external trigger source */
|
|
void adc_external_trigger_source_config(uint32_t adc_periph, uint8_t adc_channel_group, uint32_t external_trigger_source);
|
|
/* configure ADC external trigger */
|
|
void adc_external_trigger_config(uint32_t adc_periph, uint8_t adc_channel_group, ControlStatus newvalue);
|
|
/* enable ADC software trigger */
|
|
void adc_software_trigger_enable(uint32_t adc_periph, uint8_t adc_channel_group);
|
|
|
|
/* get channel data */
|
|
/* read ADC regular group data register */
|
|
uint16_t adc_regular_data_read(uint32_t adc_periph);
|
|
/* read ADC inserted group data register */
|
|
uint16_t adc_inserted_data_read(uint32_t adc_periph, uint8_t inserted_channel);
|
|
/* read the last ADC0 and ADC1 conversion result data in sync mode */
|
|
uint32_t adc_sync_mode_convert_value_read(void);
|
|
|
|
/* watchdog config */
|
|
/* configure ADC analog watchdog single channel */
|
|
void adc_watchdog_single_channel_enable(uint32_t adc_periph, uint8_t adc_channel);
|
|
/* configure ADC analog watchdog group channel */
|
|
void adc_watchdog_group_channel_enable(uint32_t adc_periph, uint8_t adc_channel_group);
|
|
/* disable ADC analog watchdog */
|
|
void adc_watchdog_disable(uint32_t adc_periph);
|
|
/* configure ADC analog watchdog threshold */
|
|
void adc_watchdog_threshold_config(uint32_t adc_periph, uint16_t low_threshold, uint16_t high_threshold);
|
|
|
|
/* interrupt & flag functions */
|
|
/* get the ADC flag bits */
|
|
FlagStatus adc_flag_get(uint32_t adc_periph, uint32_t adc_flag);
|
|
/* clear the ADC flag bits */
|
|
void adc_flag_clear(uint32_t adc_periph, uint32_t adc_flag);
|
|
/* get the bit state of ADCx software start conversion */
|
|
FlagStatus adc_regular_software_startconv_flag_get(uint32_t adc_periph);
|
|
/* get the bit state of ADCx software inserted channel start conversion */
|
|
FlagStatus adc_inserted_software_startconv_flag_get(uint32_t adc_periph);
|
|
/* get the ADC interrupt bits */
|
|
FlagStatus adc_interrupt_flag_get(uint32_t adc_periph, uint32_t adc_interrupt);
|
|
/* clear the ADC flag */
|
|
void adc_interrupt_flag_clear(uint32_t adc_periph, uint32_t adc_interrupt);
|
|
/* enable ADC interrupt */
|
|
void adc_interrupt_enable(uint32_t adc_periph, uint32_t adc_interrupt);
|
|
/* disable ADC interrupt */
|
|
void adc_interrupt_disable(uint32_t adc_periph, uint32_t adc_interrupt);
|
|
|
|
/* ADC resolution & oversample */
|
|
/* ADC resolution config */
|
|
void adc_resolution_config(uint32_t adc_periph, uint32_t resolution);
|
|
/* ADC oversample mode config */
|
|
void adc_oversample_mode_config(uint32_t adc_periph, uint8_t mode, uint16_t shift, uint8_t ratio);
|
|
/* enable ADC oversample mode */
|
|
void adc_oversample_mode_enable(uint32_t adc_periph);
|
|
/* disable ADC oversample mode */
|
|
void adc_oversample_mode_disable(uint32_t adc_periph);
|
|
|
|
#endif /* GD32VF103_ADC_H */
|