You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
242 lines
15 KiB
242 lines
15 KiB
/*!
|
|
\file gd32vf103.h
|
|
\brief general definitions for GD32VF103
|
|
|
|
\version 2019-06-05, V1.0.0, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef GD32VF103_H
|
|
#define GD32VF103_H
|
|
|
|
#ifdef cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* IO definitions (access restrictions to peripheral registers) */
|
|
/**
|
|
|
|
<strong>IO Type Qualifiers</strong> are used
|
|
\li to specify the access to peripheral variables.
|
|
\li for automatic generation of peripheral register debug information.
|
|
*/
|
|
#ifdef __cplusplus
|
|
#define __I volatile /*!< Defines 'read only' permissions */
|
|
#else
|
|
#define __I volatile const /*!< Defines 'read only' permissions */
|
|
#endif
|
|
#define __O volatile /*!< Defines 'write only' permissions */
|
|
#define __IO volatile /*!< Defines 'read / write' permissions */
|
|
|
|
/* define value of high speed crystal oscillator (HXTAL) in Hz */
|
|
#if !defined HXTAL_VALUE
|
|
#ifdef GD32VF103R_START
|
|
#define HXTAL_VALUE ((uint32_t)25000000) /*!< value of the external oscillator in Hz */
|
|
#define HXTAL_VALUE_8M HXTAL_VALUE
|
|
#elif defined(GD32VF103V_EVAL) || defined(GD32VF103C_START) || defined(GD32VF103T_START)
|
|
#define HXTAL_VALUE ((uint32_t)8000000) /*!< value of the external oscillator in Hz */
|
|
#define HXTAL_VALUE_25M HXTAL_VALUE
|
|
#else
|
|
#error "Please select the target board type used in your application (in gd32vf103.h file)"
|
|
#endif
|
|
#endif /* high speed crystal oscillator value */
|
|
|
|
/* define startup timeout value of high speed crystal oscillator (HXTAL) */
|
|
#if !defined (HXTAL_STARTUP_TIMEOUT)
|
|
#define HXTAL_STARTUP_TIMEOUT ((uint16_t)0xFFFF)
|
|
#endif /* high speed crystal oscillator startup timeout */
|
|
|
|
/* define value of internal 8MHz RC oscillator (IRC8M) in Hz */
|
|
#if !defined (IRC8M_VALUE)
|
|
#define IRC8M_VALUE ((uint32_t)8000000)
|
|
#endif /* internal 8MHz RC oscillator value */
|
|
|
|
/* define startup timeout value of internal 8MHz RC oscillator (IRC8M) */
|
|
#if !defined (IRC8M_STARTUP_TIMEOUT)
|
|
#define IRC8M_STARTUP_TIMEOUT ((uint16_t)0x0500)
|
|
#endif /* internal 8MHz RC oscillator startup timeout */
|
|
|
|
/* define value of internal 40KHz RC oscillator(IRC40K) in Hz */
|
|
#if !defined (IRC40K_VALUE)
|
|
#define IRC40K_VALUE ((uint32_t)40000)
|
|
#endif /* internal 40KHz RC oscillator value */
|
|
|
|
/* define value of low speed crystal oscillator (LXTAL)in Hz */
|
|
#if !defined (LXTAL_VALUE)
|
|
#define LXTAL_VALUE ((uint32_t)32768)
|
|
#endif /* low speed crystal oscillator value */
|
|
|
|
/* define interrupt number */
|
|
typedef enum IRQn
|
|
{
|
|
|
|
CLIC_INT_RESERVED = 0, /*!< RISC-V reserved */
|
|
CLIC_INT_SFT = 3, /*!< Software interrupt */
|
|
CLIC_INT_TMR = 7, /*!< CPU Timer interrupt */
|
|
CLIC_INT_BWEI = 17, /*!< Bus Error interrupt */
|
|
CLIC_INT_PMOVI = 18, /*!< Performance Monitor */
|
|
|
|
/* interruput numbers */
|
|
WWDGT_IRQn = 19, /*!< window watchDog timer interrupt */
|
|
LVD_IRQn = 20, /*!< LVD through EXTI line detect interrupt */
|
|
TAMPER_IRQn = 21, /*!< tamper through EXTI line detect */
|
|
RTC_IRQn = 22, /*!< RTC alarm interrupt */
|
|
FMC_IRQn = 23, /*!< FMC interrupt */
|
|
RCU_CTC_IRQn = 24, /*!< RCU and CTC interrupt */
|
|
EXTI0_IRQn = 25, /*!< EXTI line 0 interrupts */
|
|
EXTI1_IRQn = 26, /*!< EXTI line 1 interrupts */
|
|
EXTI2_IRQn = 27, /*!< EXTI line 2 interrupts */
|
|
EXTI3_IRQn = 28, /*!< EXTI line 3 interrupts */
|
|
EXTI4_IRQn = 29, /*!< EXTI line 4 interrupts */
|
|
DMA0_Channel0_IRQn = 30, /*!< DMA0 channel0 interrupt */
|
|
DMA0_Channel1_IRQn = 31, /*!< DMA0 channel1 interrupt */
|
|
DMA0_Channel2_IRQn = 32, /*!< DMA0 channel2 interrupt */
|
|
DMA0_Channel3_IRQn = 33, /*!< DMA0 channel3 interrupt */
|
|
DMA0_Channel4_IRQn = 34, /*!< DMA0 channel4 interrupt */
|
|
DMA0_Channel5_IRQn = 35, /*!< DMA0 channel5 interrupt */
|
|
DMA0_Channel6_IRQn = 36, /*!< DMA0 channel6 interrupt */
|
|
ADC0_1_IRQn = 37, /*!< ADC0 and ADC1 interrupt */
|
|
CAN0_TX_IRQn = 38, /*!< CAN0 TX interrupts */
|
|
CAN0_RX0_IRQn = 39, /*!< CAN0 RX0 interrupts */
|
|
CAN0_RX1_IRQn = 40, /*!< CAN0 RX1 interrupts */
|
|
CAN0_EWMC_IRQn = 41, /*!< CAN0 EWMC interrupts */
|
|
EXTI5_9_IRQn = 42, /*!< EXTI[9:5] interrupts */
|
|
TIMER0_BRK_IRQn = 43, /*!< TIMER0 break interrupts */
|
|
TIMER0_UP_IRQn = 44, /*!< TIMER0 update interrupts */
|
|
TIMER0_TRG_CMT_IRQn = 45, /*!< TIMER0 trigger and commutation interrupts */
|
|
TIMER0_Channel_IRQn = 46, /*!< TIMER0 channel capture compare interrupts */
|
|
TIMER1_IRQn = 47, /*!< TIMER1 interrupt */
|
|
TIMER2_IRQn = 48, /*!< TIMER2 interrupt */
|
|
TIMER3_IRQn = 49, /*!< TIMER3 interrupts */
|
|
I2C0_EV_IRQn = 50, /*!< I2C0 event interrupt */
|
|
I2C0_ER_IRQn = 51, /*!< I2C0 error interrupt */
|
|
I2C1_EV_IRQn = 52, /*!< I2C1 event interrupt */
|
|
I2C1_ER_IRQn = 53, /*!< I2C1 error interrupt */
|
|
SPI0_IRQn = 54, /*!< SPI0 interrupt */
|
|
SPI1_IRQn = 55, /*!< SPI1 interrupt */
|
|
USART0_IRQn = 56, /*!< USART0 interrupt */
|
|
USART1_IRQn = 57, /*!< USART1 interrupt */
|
|
USART2_IRQn = 58, /*!< USART2 interrupt */
|
|
EXTI10_15_IRQn = 59, /*!< EXTI[15:10] interrupts */
|
|
RTC_ALARM_IRQn = 60, /*!< RTC alarm interrupt EXTI */
|
|
USBFS_WKUP_IRQn = 61, /*!< USBFS wakeup interrupt */
|
|
|
|
EXMC_IRQn = 67, /*!< EXMC global interrupt */
|
|
|
|
TIMER4_IRQn = 69, /*!< TIMER4 global interrupt */
|
|
SPI2_IRQn = 70, /*!< SPI2 global interrupt */
|
|
UART3_IRQn = 71, /*!< UART3 global interrupt */
|
|
UART4_IRQn = 72, /*!< UART4 global interrupt */
|
|
TIMER5_IRQn = 73, /*!< TIMER5 global interrupt */
|
|
TIMER6_IRQn = 74, /*!< TIMER6 global interrupt */
|
|
DMA1_Channel0_IRQn = 75, /*!< DMA1 channel0 global interrupt */
|
|
DMA1_Channel1_IRQn = 76, /*!< DMA1 channel1 global interrupt */
|
|
DMA1_Channel2_IRQn = 77, /*!< DMA1 channel2 global interrupt */
|
|
DMA1_Channel3_IRQn = 78, /*!< DMA1 channel3 global interrupt */
|
|
DMA1_Channel4_IRQn = 79, /*!< DMA1 channel3 global interrupt */
|
|
|
|
CAN1_TX_IRQn = 82, /*!< CAN1 TX interrupt */
|
|
CAN1_RX0_IRQn = 83, /*!< CAN1 RX0 interrupt */
|
|
CAN1_RX1_IRQn = 84, /*!< CAN1 RX1 interrupt */
|
|
CAN1_EWMC_IRQn = 85, /*!< CAN1 EWMC interrupt */
|
|
USBFS_IRQn = 86, /*!< USBFS global interrupt */
|
|
|
|
ECLIC_NUM_INTERRUPTS
|
|
} IRQn_Type;
|
|
|
|
/* includes */
|
|
#include "system_gd32vf103.h"
|
|
#include <stdint.h>
|
|
|
|
/* enum definitions */
|
|
typedef enum {DISABLE = 0, ENABLE = !DISABLE} EventStatus, ControlStatus;
|
|
typedef enum {FALSE = 0, TRUE = !FALSE} bool;
|
|
typedef enum {RESET = 0, SET = 1,MAX = 0X7FFFFFFF} FlagStatus;
|
|
typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrStatus;
|
|
|
|
/* bit operations */
|
|
#define REG32(addr) (*(volatile uint32_t *)(uint32_t)(addr))
|
|
#define REG16(addr) (*(volatile uint16_t *)(uint32_t)(addr))
|
|
#define REG8(addr) (*(volatile uint8_t *)(uint32_t)(addr))
|
|
#define BIT(x) ((uint32_t)((uint32_t)0x01U<<(x)))
|
|
#define BITS(start, end) ((0xFFFFFFFFUL << (start)) & (0xFFFFFFFFUL >> (31U - (uint32_t)(end))))
|
|
#define GET_BITS(regval, start, end) (((regval) & BITS((start),(end))) >> (start))
|
|
|
|
/* main flash and SRAM memory map */
|
|
#define FLASH_BASE ((uint32_t)0x08000000U) /*!< main FLASH base address */
|
|
#define SRAM_BASE ((uint32_t)0x20000000U) /*!< SRAM0 base address */
|
|
#define OB_BASE ((uint32_t)0x1FFFF800U) /*!< OB base address */
|
|
#define DBG_BASE ((uint32_t)0xE0042000U) /*!< DBG base address */
|
|
#define EXMC_BASE ((uint32_t)0xA0000000U) /*!< EXMC register base address */
|
|
|
|
/* peripheral memory map */
|
|
#define APB1_BUS_BASE ((uint32_t)0x40000000U) /*!< apb1 base address */
|
|
#define APB2_BUS_BASE ((uint32_t)0x40010000U) /*!< apb2 base address */
|
|
#define AHB1_BUS_BASE ((uint32_t)0x40018000U) /*!< ahb1 base address */
|
|
#define AHB3_BUS_BASE ((uint32_t)0x60000000U) /*!< ahb3 base address */
|
|
|
|
/* advanced peripheral bus 1 memory map */
|
|
#define TIMER_BASE (APB1_BUS_BASE + 0x00000000U) /*!< TIMER base address */
|
|
#define RTC_BASE (APB1_BUS_BASE + 0x00002800U) /*!< RTC base address */
|
|
#define WWDGT_BASE (APB1_BUS_BASE + 0x00002C00U) /*!< WWDGT base address */
|
|
#define FWDGT_BASE (APB1_BUS_BASE + 0x00003000U) /*!< FWDGT base address */
|
|
#define SPI_BASE (APB1_BUS_BASE + 0x00003800U) /*!< SPI base address */
|
|
#define USART_BASE (APB1_BUS_BASE + 0x00004400U) /*!< USART base address */
|
|
#define I2C_BASE (APB1_BUS_BASE + 0x00005400U) /*!< I2C base address */
|
|
#define CAN_BASE (APB1_BUS_BASE + 0x00006400U) /*!< CAN base address */
|
|
#define BKP_BASE (APB1_BUS_BASE + 0x00006C00U) /*!< BKP base address */
|
|
#define PMU_BASE (APB1_BUS_BASE + 0x00007000U) /*!< PMU base address */
|
|
#define DAC_BASE (APB1_BUS_BASE + 0x00007400U) /*!< DAC base address */
|
|
|
|
/* advanced peripheral bus 2 memory map */
|
|
#define AFIO_BASE (APB2_BUS_BASE + 0x00000000U) /*!< AFIO base address */
|
|
#define EXTI_BASE (APB2_BUS_BASE + 0x00000400U) /*!< EXTI base address */
|
|
#define GPIO_BASE (APB2_BUS_BASE + 0x00000800U) /*!< GPIO base address */
|
|
#define ADC_BASE (APB2_BUS_BASE + 0x00002400U) /*!< ADC base address */
|
|
|
|
/* advanced high performance bus 1 memory map */
|
|
#define DMA_BASE (AHB1_BUS_BASE + 0x00008000U) /*!< DMA base address */
|
|
#define RCU_BASE (AHB1_BUS_BASE + 0x00009000U) /*!< RCU base address */
|
|
#define FMC_BASE (AHB1_BUS_BASE + 0x0000A000U) /*!< FMC base address */
|
|
#define CRC_BASE (AHB1_BUS_BASE + 0x0000B000U) /*!< CRC base address */
|
|
#define USBFS_BASE (AHB1_BUS_BASE + 0x0FFE8000U) /*!< USBFS base address */
|
|
|
|
/* define marco USE_STDPERIPH_DRIVER */
|
|
#if !defined USE_STDPERIPH_DRIVER
|
|
#define USE_STDPERIPH_DRIVER
|
|
#endif
|
|
#ifdef USE_STDPERIPH_DRIVER
|
|
#include "gd32vf103_libopt.h"
|
|
#endif /* USE_STDPERIPH_DRIVER */
|
|
|
|
#ifdef cplusplus
|
|
}
|
|
#endif
|
|
#endif
|