You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
308 lines
11 KiB
308 lines
11 KiB
9 years ago
|
/**
|
||
|
******************************************************************************
|
||
|
* @file stm32f4xx_hal_dma_ex.c
|
||
|
* @author MCD Application Team
|
||
|
* @version V1.2.0
|
||
|
* @date 26-December-2014
|
||
|
* @brief DMA Extension HAL module driver
|
||
|
* This file provides firmware functions to manage the following
|
||
|
* functionalities of the DMA Extension peripheral:
|
||
|
* + Extended features functions
|
||
|
*
|
||
|
@verbatim
|
||
|
==============================================================================
|
||
|
##### How to use this driver #####
|
||
|
==============================================================================
|
||
|
[..]
|
||
|
The DMA Extension HAL driver can be used as follows:
|
||
|
(#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
|
||
|
for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
|
||
|
|
||
|
-@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
|
||
|
-@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
|
||
|
-@- In Multi (Double) buffer mode, it is possible to update the base address for
|
||
|
the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
|
||
|
|
||
|
@endverbatim
|
||
|
******************************************************************************
|
||
|
* @attention
|
||
|
*
|
||
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
||
|
*
|
||
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
* are permitted provided that the following conditions are met:
|
||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
* this list of conditions and the following disclaimer.
|
||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
* and/or other materials provided with the distribution.
|
||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
* may be used to endorse or promote products derived from this software
|
||
|
* without specific prior written permission.
|
||
|
*
|
||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
/* Includes ------------------------------------------------------------------*/
|
||
|
#include "stm32f4xx_hal.h"
|
||
|
|
||
|
/** @addtogroup STM32F4xx_HAL_Driver
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/** @defgroup DMAEx DMAEx
|
||
|
* @brief DMA Extended HAL module driver
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
#ifdef HAL_DMA_MODULE_ENABLED
|
||
|
|
||
|
/* Private types -------------------------------------------------------------*/
|
||
|
/* Private variables ---------------------------------------------------------*/
|
||
|
/* Private Constants ---------------------------------------------------------*/
|
||
|
/* Private macros ------------------------------------------------------------*/
|
||
|
/* Private functions ---------------------------------------------------------*/
|
||
|
/** @addtogroup DMAEx_Private_Functions
|
||
|
* @{
|
||
|
*/
|
||
|
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/* Exported functions ---------------------------------------------------------*/
|
||
|
|
||
|
/** @addtogroup DMAEx_Exported_Functions
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
|
||
|
/** @addtogroup DMAEx_Exported_Functions_Group1
|
||
|
*
|
||
|
@verbatim
|
||
|
===============================================================================
|
||
|
##### Extended features functions #####
|
||
|
===============================================================================
|
||
|
[..] This section provides functions allowing to:
|
||
|
(+) Configure the source, destination address and data length and
|
||
|
Start MultiBuffer DMA transfer
|
||
|
(+) Configure the source, destination address and data length and
|
||
|
Start MultiBuffer DMA transfer with interrupt
|
||
|
(+) Change on the fly the memory0 or memory1 address.
|
||
|
|
||
|
@endverbatim
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
|
||
|
/**
|
||
|
* @brief Starts the multi_buffer DMA Transfer.
|
||
|
* @param hdma : pointer to a DMA_HandleTypeDef structure that contains
|
||
|
* the configuration information for the specified DMA Stream.
|
||
|
* @param SrcAddress: The source memory Buffer address
|
||
|
* @param DstAddress: The destination memory Buffer address
|
||
|
* @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
|
||
|
* @param DataLength: The length of data to be transferred from source to destination
|
||
|
* @retval HAL status
|
||
|
*/
|
||
|
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
|
||
|
{
|
||
|
/* Process Locked */
|
||
|
__HAL_LOCK(hdma);
|
||
|
|
||
|
/* Current memory buffer used is Memory 0 */
|
||
|
if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
|
||
|
{
|
||
|
hdma->State = HAL_DMA_STATE_BUSY_MEM0;
|
||
|
}
|
||
|
/* Current memory buffer used is Memory 1 */
|
||
|
else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
|
||
|
{
|
||
|
hdma->State = HAL_DMA_STATE_BUSY_MEM1;
|
||
|
}
|
||
|
|
||
|
/* Check the parameters */
|
||
|
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
||
|
|
||
|
/* Disable the peripheral */
|
||
|
__HAL_DMA_DISABLE(hdma);
|
||
|
|
||
|
/* Enable the double buffer mode */
|
||
|
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
|
||
|
|
||
|
/* Configure DMA Stream destination address */
|
||
|
hdma->Instance->M1AR = SecondMemAddress;
|
||
|
|
||
|
/* Configure the source, destination address and the data length */
|
||
|
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
||
|
|
||
|
/* Enable the peripheral */
|
||
|
__HAL_DMA_ENABLE(hdma);
|
||
|
|
||
|
return HAL_OK;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
|
||
|
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
|
||
|
* the configuration information for the specified DMA Stream.
|
||
|
* @param SrcAddress: The source memory Buffer address
|
||
|
* @param DstAddress: The destination memory Buffer address
|
||
|
* @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
|
||
|
* @param DataLength: The length of data to be transferred from source to destination
|
||
|
* @retval HAL status
|
||
|
*/
|
||
|
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
|
||
|
{
|
||
|
/* Process Locked */
|
||
|
__HAL_LOCK(hdma);
|
||
|
|
||
|
/* Current memory buffer used is Memory 0 */
|
||
|
if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
|
||
|
{
|
||
|
hdma->State = HAL_DMA_STATE_BUSY_MEM0;
|
||
|
}
|
||
|
/* Current memory buffer used is Memory 1 */
|
||
|
else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
|
||
|
{
|
||
|
hdma->State = HAL_DMA_STATE_BUSY_MEM1;
|
||
|
}
|
||
|
|
||
|
/* Check the parameters */
|
||
|
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
||
|
|
||
|
/* Disable the peripheral */
|
||
|
__HAL_DMA_DISABLE(hdma);
|
||
|
|
||
|
/* Enable the Double buffer mode */
|
||
|
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
|
||
|
|
||
|
/* Configure DMA Stream destination address */
|
||
|
hdma->Instance->M1AR = SecondMemAddress;
|
||
|
|
||
|
/* Configure the source, destination address and the data length */
|
||
|
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
||
|
|
||
|
/* Enable the transfer complete interrupt */
|
||
|
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
|
||
|
|
||
|
/* Enable the Half transfer interrupt */
|
||
|
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
|
||
|
|
||
|
/* Enable the transfer Error interrupt */
|
||
|
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
|
||
|
|
||
|
/* Enable the fifo Error interrupt */
|
||
|
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);
|
||
|
|
||
|
/* Enable the direct mode Error interrupt */
|
||
|
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME);
|
||
|
|
||
|
/* Enable the peripheral */
|
||
|
__HAL_DMA_ENABLE(hdma);
|
||
|
|
||
|
return HAL_OK;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Change the memory0 or memory1 address on the fly.
|
||
|
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
|
||
|
* the configuration information for the specified DMA Stream.
|
||
|
* @param Address: The new address
|
||
|
* @param memory: the memory to be changed, This parameter can be one of
|
||
|
* the following values:
|
||
|
* MEMORY0 /
|
||
|
* MEMORY1
|
||
|
* @note The MEMORY0 address can be changed only when the current transfer use
|
||
|
* MEMORY1 and the MEMORY1 address can be changed only when the current
|
||
|
* transfer use MEMORY0.
|
||
|
* @retval HAL status
|
||
|
*/
|
||
|
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
|
||
|
{
|
||
|
if(memory == MEMORY0)
|
||
|
{
|
||
|
/* change the memory0 address */
|
||
|
hdma->Instance->M0AR = Address;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* change the memory1 address */
|
||
|
hdma->Instance->M1AR = Address;
|
||
|
}
|
||
|
|
||
|
return HAL_OK;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @addtogroup DMAEx_Private_Functions
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @brief Set the DMA Transfer parameter.
|
||
|
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
|
||
|
* the configuration information for the specified DMA Stream.
|
||
|
* @param SrcAddress: The source memory Buffer address
|
||
|
* @param DstAddress: The destination memory Buffer address
|
||
|
* @param DataLength: The length of data to be transferred from source to destination
|
||
|
* @retval HAL status
|
||
|
*/
|
||
|
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
||
|
{
|
||
|
/* Configure DMA Stream data length */
|
||
|
hdma->Instance->NDTR = DataLength;
|
||
|
|
||
|
/* Peripheral to Memory */
|
||
|
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
|
||
|
{
|
||
|
/* Configure DMA Stream destination address */
|
||
|
hdma->Instance->PAR = DstAddress;
|
||
|
|
||
|
/* Configure DMA Stream source address */
|
||
|
hdma->Instance->M0AR = SrcAddress;
|
||
|
}
|
||
|
/* Memory to Peripheral */
|
||
|
else
|
||
|
{
|
||
|
/* Configure DMA Stream source address */
|
||
|
hdma->Instance->PAR = SrcAddress;
|
||
|
|
||
|
/* Configure DMA Stream destination address */
|
||
|
hdma->Instance->M0AR = DstAddress;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|