/*
 * board_config.h
 *
 *  Created on: 25/03/2015
 *      Author: Robert Fisk
 */

#ifndef INC_BOARD_CONFIG_H_
#define INC_BOARD_CONFIG_H_


#define BSRR_SHIFT_HIGH			0
#define BSRR_SHIFT_LOW			16

#define PA_JTMS					GPIO_PIN_13
#define PA_JTCK					GPIO_PIN_14
#define PA_JTDI					GPIO_PIN_15
#define PB_JTDO					GPIO_PIN_3
#define PB_NJTRST				GPIO_PIN_4

#define USB_FS_VBUS_PIN			GPIO_PIN_9
#define USB_FS_VBUS_PORT		GPIOA
#define USB_FS_VBUSON_PIN		GPIO_PIN_10
#define USB_FS_VBUSON_PORT		GPIOA
#define USB_FS_FAULT_PIN		GPIO_PIN_6
#define USB_FS_FAULT_PORT		GPIOB

#define USB_HS_VBUS_PIN			GPIO_PIN_13
#define USB_HS_VBUS_PORT		GPIOB
#define USB_HS_VBUSON_PIN		GPIO_PIN_8
#define USB_HS_VBUSON_PORT		GPIOA

#define STAT_LED_PIN			GPIO_PIN_13
#define STAT_LED_PORT			GPIOC
#define STAT_LED_ON				(STAT_LED_PORT->BSRR = (STAT_LED_PIN << BSRR_SHIFT_LOW))	//Stat LED is active-low
#define STAT_LED_OFF			(STAT_LED_PORT->BSRR = (STAT_LED_PIN << BSRR_SHIFT_HIGH))

//#define RUN_LED_ON......
#define FAULT_LED_ON			STAT_LED_ON
#define FAULT_LED_OFF			STAT_LED_OFF


#define SPI_INT_ACTIVE_PIN		GPIO_PIN_2		/////////Temporary indicator of SPI activity
#define SPI_INT_ACTIVE_PORT		GPIOA
#define SPI_INT_ACTIVE_ON		SPI_INT_ACTIVE_PORT->BSRR = (SPI_INT_ACTIVE_PIN << BSRR_SHIFT_HIGH)
#define SPI_INT_ACTIVE_OFF		SPI_INT_ACTIVE_PORT->BSRR = (SPI_INT_ACTIVE_PIN << BSRR_SHIFT_LOW)

//#define SPI1_NSS_PIN			GPIO_PIN_4
//#define SPI1_NSS_PORT			GPIOA

#define UPSTREAM_TX_REQUEST_PIN			GPIO_PIN_3
#define UPSTREAM_TX_REQUEST_PORT		GPIOA
#define UPSTREAM_TX_REQUEST_ASSERT		(UPSTREAM_TX_REQUEST_PORT->BSRR = (UPSTREAM_TX_REQUEST_PIN << BSRR_SHIFT_LOW))
#define UPSTREAM_TX_REQUEST_DEASSERT	(UPSTREAM_TX_REQUEST_PORT->BSRR = (UPSTREAM_TX_REQUEST_PIN << BSRR_SHIFT_HIGH))


#endif /* INC_BOARD_CONFIG_H_ */