You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
usb-firewall-fork/Downstream/Src/usbh_config.c

457 lines
13 KiB

/**
******************************************************************************
* @file : usbh_conf.c
* @version : v1.0_Cube
* @brief : This file implements the board support package for the USB host library
******************************************************************************
* COPYRIGHT(c) 2015 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbh_core.h"
#include "interrupts.h"
HCD_HandleTypeDef hhcd_USB_OTG_FS;
/*******************************************************************************
LL Driver Callbacks (HCD -> USB Host Library)
*******************************************************************************/
/* MSP Init */
void HAL_HCD_MspInit(HCD_HandleTypeDef* hhcd)
{
GPIO_InitTypeDef GPIO_InitStruct;
if(hhcd->Instance==USB_OTG_FS)
{
/**USB_OTG_FS GPIO Configuration
PA11 ------> USB_OTG_FS_DM
PA12 ------> USB_OTG_FS_DP
*/
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* Peripheral clock enable */
__USB_OTG_FS_CLK_ENABLE();
/* Peripheral interrupt init*/
HAL_NVIC_SetPriority(OTG_FS_IRQn, INT_PRIORITY_OTG_FS, 0);
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
}
}
void HAL_HCD_MspDeInit(HCD_HandleTypeDef* hhcd)
{
if(hhcd->Instance==USB_OTG_FS)
{
/* Peripheral clock disable */
__USB_OTG_FS_CLK_DISABLE();
/**USB_OTG_FS GPIO Configuration
PA9 ------> USB_OTG_FS_VBUS
PA11 ------> USB_OTG_FS_DM
PA12 ------> USB_OTG_FS_DP
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
/* Peripheral interrupt Deinit*/
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
}
}
/**
* @brief SOF callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_IncTimer (hhcd->pData);
}
/**
* @brief SOF callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_Connect(hhcd->pData);
}
/**
* @brief SOF callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_Disconnect(hhcd->pData);
}
/**
* @brief Notify URB state change callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
{
/* To be used with OS to sync URB state with the global state machine */
#if (USBH_USE_OS == 1)
USBH_LL_NotifyURBChange(hhcd->pData);
#endif
}
/*******************************************************************************
LL Driver Interface (USB Host Library --> HCD)
*******************************************************************************/
/**
* @brief USBH_LL_Init
* Initialize the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init (USBH_HandleTypeDef *phost)
{
/* Init USB_IP */
if (phost->id == HOST_FS) {
/* Link The driver to the stack */
hhcd_USB_OTG_FS.pData = phost;
phost->pData = &hhcd_USB_OTG_FS;
hhcd_USB_OTG_FS.Instance = USB_OTG_FS;
hhcd_USB_OTG_FS.Init.Host_channels = 8;
hhcd_USB_OTG_FS.Init.speed = HCD_SPEED_FULL;
hhcd_USB_OTG_FS.Init.dma_enable = DISABLE;
hhcd_USB_OTG_FS.Init.phy_itface = HCD_PHY_EMBEDDED;
hhcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
HAL_HCD_Init(&hhcd_USB_OTG_FS);
USBH_LL_SetTimer (phost, HAL_HCD_GetCurrentFrame(&hhcd_USB_OTG_FS));
}
return USBH_OK;
}
/**
* @brief USBH_LL_DeInit
* De-Initialize the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_DeInit (USBH_HandleTypeDef *phost)
{
HAL_HCD_DeInit(phost->pData);
return USBH_OK;
}
/**
* @brief USBH_LL_Start
* Start the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef *phost)
{
HAL_HCD_Start(phost->pData);
return USBH_OK;
}
/**
* @brief USBH_LL_Stop
* Stop the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Stop (USBH_HandleTypeDef *phost)
{
HAL_HCD_Stop(phost->pData);
return USBH_OK;
}
/**
* @brief USBH_LL_GetSpeed
* Return the USB Host Speed from the Low Level Driver.
* @param phost: Host handle
* @retval USBH Speeds
*/
USBH_SpeedTypeDef USBH_LL_GetSpeed (USBH_HandleTypeDef *phost)
{
USBH_SpeedTypeDef speed = USBH_SPEED_FULL;
switch (HAL_HCD_GetCurrentSpeed(phost->pData))
{
case 0 :
speed = USBH_SPEED_HIGH;
break;
// case 1 :
// speed = USBH_SPEED_FULL;
// break;
case 2 :
speed = USBH_SPEED_LOW;
break;
// default:
// speed = USBH_SPEED_FULL;
// break;
}
return speed;
}
/**
* @brief USBH_LL_ResetPort
* Reset the Host Port of the Low Level Driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_ResetPort (USBH_HandleTypeDef *phost)
{
HAL_HCD_ResetPort(phost->pData);
return USBH_OK;
}
/**
* @brief USBH_LL_GetLastXferSize
* Return the last transfered packet size.
* @param phost: Host handle
* @param pipe: Pipe index
* @retval Packet Size
*/
uint32_t USBH_LL_GetLastXferSize (USBH_HandleTypeDef *phost, uint8_t pipe)
{
return HAL_HCD_HC_GetXferCount(phost->pData, pipe);
}
/**
* @brief USBH_LL_OpenPipe
* Open a pipe of the Low Level Driver.
* @param phost: Host handle
* @param pipe_num: Pipe index
* @param epnum: Endpoint Number
* @param dev_address: Device USB address
* @param speed: Device Speed
* @param ep_type: Endpoint Type
* @param mps: Endpoint Max Packet Size
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_OpenPipe (USBH_HandleTypeDef *phost,
uint8_t pipe_num,
uint8_t epnum,
uint8_t dev_address,
uint8_t speed,
uint8_t ep_type,
uint16_t mps)
{
HAL_HCD_HC_Init(phost->pData,
pipe_num,
epnum,
dev_address,
speed,
ep_type,
mps);
return USBH_OK;
}
/**
* @brief USBH_LL_ClosePipe
* Close a pipe of the Low Level Driver.
* @param phost: Host handle
* @param pipe_num: Pipe index
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_ClosePipe (USBH_HandleTypeDef *phost, uint8_t pipe)
{
HAL_HCD_HC_Halt(phost->pData, pipe);
return USBH_OK;
}
/**
* @brief USBH_LL_SubmitURB
* Submit a new URB to the low level driver.
* @param phost: Host handle
* @param pipe: Pipe index
* This parameter can be a value from 1 to 15
* @param direction : Channel number
* This parameter can be one of the these values:
* 0 : Output
* 1 : Input
* @param ep_type : Endpoint Type
* This parameter can be one of the these values:
* @arg EP_TYPE_CTRL: Control type
* @arg EP_TYPE_ISOC: Isochrounous type
* @arg EP_TYPE_BULK: Bulk type
* @arg EP_TYPE_INTR: Interrupt type
* @param token : Endpoint Type
* This parameter can be one of the these values:
* @arg 0: PID_SETUP
* @arg 1: PID_DATA
* @param pbuff : pointer to URB data
* @param length : Length of URB data
* @param do_ping : activate do ping protocol (for high speed only)
* This parameter can be one of the these values:
* 0 : do ping inactive
* 1 : do ping active
* @retval Status
*/
USBH_StatusTypeDef USBH_LL_SubmitURB (USBH_HandleTypeDef *phost,
uint8_t pipe,
uint8_t direction ,
uint8_t ep_type,
uint8_t token,
uint8_t* pbuff,
uint16_t length,
uint8_t do_ping )
{
HAL_HCD_HC_SubmitRequest (phost->pData,
pipe,
direction ,
ep_type,
token,
pbuff,
length,
do_ping);
return USBH_OK;
}
/**
* @brief USBH_LL_GetURBState
* Get a URB state from the low level driver.
* @param phost: Host handle
* @param pipe: Pipe index
* This parameter can be a value from 1 to 15
* @retval URB state
* This parameter can be one of the these values:
* @arg URB_IDLE
* @arg URB_DONE
* @arg URB_NOTREADY
* @arg URB_NYET
* @arg URB_ERROR
* @arg URB_STALL
*/
USBH_URBStateTypeDef USBH_LL_GetURBState (USBH_HandleTypeDef *phost, uint8_t pipe)
{
return (USBH_URBStateTypeDef)HAL_HCD_HC_GetURBState (phost->pData, pipe);
}
/**
* @brief USBH_LL_DriverVBUS
* Drive VBUS.
* @param phost: Host handle
* @param state : VBUS state
* This parameter can be one of the these values:
* 0 : VBUS Active
* 1 : VBUS Inactive
* @retval Status
*/
USBH_StatusTypeDef USBH_LL_DriverVBUS (USBH_HandleTypeDef *phost, uint8_t state)
{
//Our VBUS is permanently on, so don't bother with this...
// if (phost->id == HOST_FS)
// {
// if(state == 0)
// {
// //VBUS off
// }
// else
// {
// //VBUS on
// }
// }
// HAL_Delay(200);
return USBH_OK;
}
/**
* @brief USBH_LL_SetToggle
* Set toggle for a pipe.
* @param phost: Host handle
* @param pipe: Pipe index
* @param pipe_num: Pipe index
* @param toggle: toggle (0/1)
* @retval Status
*/
USBH_StatusTypeDef USBH_LL_SetToggle (USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t toggle)
{
HCD_HandleTypeDef *pHandle;
pHandle = phost->pData;
if(pHandle->hc[pipe].ep_is_in)
{
pHandle->hc[pipe].toggle_in = toggle;
}
else
{
pHandle->hc[pipe].toggle_out = toggle;
}
return USBH_OK;
}
/**
* @brief USBH_LL_GetToggle
* Return the current toggle of a pipe.
* @param phost: Host handle
* @param pipe: Pipe index
* @retval toggle (0/1)
*/
uint8_t USBH_LL_GetToggle (USBH_HandleTypeDef *phost, uint8_t pipe)
{
uint8_t toggle = 0;
HCD_HandleTypeDef *pHandle;
pHandle = phost->pData;
if(pHandle->hc[pipe].ep_is_in)
{
toggle = pHandle->hc[pipe].toggle_in;
}
else
{
toggle = pHandle->hc[pipe].toggle_out;
}
return toggle;
}
/**
* @brief USBH_Delay
* Delay routine for the USB Host Library
* @param Delay: Delay in ms
* @retval None
*/
void USBH_Delay (uint32_t Delay)
{
HAL_Delay(Delay);
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/