Fork Sand fork of the Globotron USG v1.0 Hardware Firewall.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

593 lines
13 KiB

/**
******************************************************************************
* @file usbd_core.c
* @author MCD Application Team
* @version V2.4.1
* @date 19-June-2015
* @brief This file provides all the USBD core functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_core.h"
#include "usbd_descriptors.h"
#include "upstream_statemachine.h"
/** @addtogroup STM32_USBD_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief usbd core module
* @{
*/
/** @defgroup USBD_CORE_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Functions
* @{
*/
/**
* @brief USBD_Init
* Initializes the device stack and load the class driver
* @param pdev: device instance
* @param pdesc: Descriptor structure address
* @param id: Low level core index
* @retval None
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
{
/* Check whether the USB Host handle is valid */
if(pdev == NULL)
{
USBD_ErrLog("Invalid Device handle");
return USBD_FAIL;
}
/* Unlink previous class*/
pdev->pClass = NULL;
pdev->pClassData = NULL;
/* Assign USBD Descriptors */
if(pdesc != NULL)
{
pdev->pDesc = pdesc;
}
/* Set Device initial State */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->id = id;
/* Initialize low level driver */
USBD_LL_Init(pdev);
pdev->usbCoreStatus = USB_STATUS_STOP;
return USBD_OK;
}
/**
* @brief USBD_DeInit
* Re-Initialize th device library
* @param pdev: device instance
* @retval status: status
*/
USBD_ClassTypeDef* USBD_DeInit(USBD_HandleTypeDef *pdev)
{
/* Set Default State */
pdev->dev_state = USBD_STATE_DEFAULT;
/* Free Class Resources */
pdev->pClass->DeInit(pdev, pdev->dev_config);
/* Stop the low level driver */
// USBD_LL_Stop(pdev);
/* Deinitialize low level driver */
USBD_LL_DeInit(pdev);
return pdev->pClass;
// return USBD_OK;
}
/**
* @brief USBD_RegisterClass
* Link class driver to Device Core.
* @param pDevice : Device Handle
* @param pclass: Class handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
{
USBD_StatusTypeDef status = USBD_OK;
if(pclass != 0)
{
/* link the class to the USB Device handle */
pdev->pClass = pclass;
USBD_FS_DeviceDesc[USBD_PID_LOBYTE_OFFSET] = LOBYTE(pclass->USBDevPid);
USBD_FS_DeviceDesc[USBD_PID_HIBYTE_OFFSET] = HIBYTE(pclass->USBDevPid);
status = USBD_OK;
}
else
{
USBD_ErrLog("Invalid Class handle");
status = USBD_FAIL;
}
return status;
}
/**
* @brief USBD_Start
* Start the USB Device Core.
* @param pdev: Device Handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
{
/* Start the low level driver */
USBD_LL_Start(pdev);
pdev->usbCoreStatus = USB_STATUS_START;
pdev->dev_state = USBD_STATE_DEFAULT;
return USBD_OK;
}
/**
* @brief USBD_Stop
* Stop the USB Device Core.
* @param pdev: Device Handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
{
/* Free Class Resources */
pdev->pClass->DeInit(pdev, pdev->dev_config);
/* Stop the low level driver */
USBD_LL_Stop(pdev);
pdev->usbCoreStatus = USB_STATUS_STOP;
return USBD_OK;
}
/**
* @brief USBD_RunTestMode
* Launch test mode process
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
{
UNUSED(pdev);
return USBD_OK;
}
/**
* @brief USBD_SetClassConfig
* Configure device and start the interface
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
USBD_StatusTypeDef ret = USBD_FAIL;
if(pdev->pClass != NULL)
{
/* Set configuration and Start the Class*/
if(pdev->pClass->Init(pdev, cfgidx) == 0)
{
ret = USBD_OK;
}
}
return ret;
}
/**
* @brief USBD_ClrClassConfig
* Clear current configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status: USBD_StatusTypeDef
*/
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
/* Clear configuration and De-initialize the Class process*/
pdev->pClass->DeInit(pdev, cfgidx);
return USBD_OK;
}
/**
* @brief USBD_SetupStage
* Handle the setup stage
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
{
USBD_ParseSetupRequest(&pdev->request, psetup);
pdev->ep0_state = USBD_EP0_SETUP;
pdev->ep0_data_len = pdev->request.wLength;
switch (pdev->request.bmRequest & 0x1F)
{
case USB_REQ_RECIPIENT_DEVICE:
USBD_StdDevReq (pdev, &pdev->request);
break;
case USB_REQ_RECIPIENT_INTERFACE:
USBD_StdItfReq(pdev, &pdev->request);
break;
case USB_REQ_RECIPIENT_ENDPOINT:
USBD_StdEPReq(pdev, &pdev->request);
break;
default:
USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
break;
}
return USBD_OK;
}
/**
* @brief USBD_DataOutStage
* Handle data OUT stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
{
USBD_EndpointTypeDef *pep;
if(epnum == 0)
{
pep = &pdev->ep_out[0];
if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
{
if(pep->rem_length > pep->maxpacket)
{
pep->rem_length -= pep->maxpacket;
USBD_CtlContinueRx (pdev,
pdata,
pep->rem_length);
}
else
{
if((pdev->pClass->EP0_RxReady != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->EP0_RxReady(pdev);
}
USBD_CtlSendStatus(pdev);
}
}
}
else if((pdev->pClass->DataOut != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->DataOut(pdev, epnum);
}
return USBD_OK;
}
/**
* @brief USBD_DataInStage
* Handle data in stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
{
USBD_EndpointTypeDef *pep;
if(epnum == 0)
{
pep = &pdev->ep_in[0];
if ( pdev->ep0_state == USBD_EP0_DATA_IN)
{
if(pep->rem_length > pep->maxpacket)
{
pep->rem_length -= pep->maxpacket;
USBD_CtlContinueSendData (pdev,
pdata,
pep->rem_length);
}
else
{
//We sent less data than host was expecting?
/* last packet is MPS multiple, so send ZLP packet */
if((pep->total_length % pep->maxpacket == 0) &&
(pep->total_length >= pep->maxpacket) &&
(pep->total_length < pdev->ep0_data_len ))
{
USBD_CtlContinueSendData(pdev , NULL, 0);
pdev->ep0_data_len = 0;
}
else
{
if((pdev->pClass->EP0_TxSent != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->EP0_TxSent(pdev);
}
USBD_CtlReceiveStatus(pdev);
}
}
}
if (pdev->dev_test_mode == 1)
{
USBD_RunTestMode(pdev);
pdev->dev_test_mode = 0;
}
}
else if((pdev->pClass->DataIn != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->DataIn(pdev, epnum);
}
return USBD_OK;
}
/**
* @brief USBD_Reset
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_Reset(USBD_HandleTypeDef *pdev)
{
/* Open EP0 OUT */
USBD_LL_OpenEP(pdev,
0x00,
USBD_EP_TYPE_CTRL,
USB_MAX_EP0_SIZE);
pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
/* Open EP0 IN */
USBD_LL_OpenEP(pdev,
0x80,
USBD_EP_TYPE_CTRL,
USB_MAX_EP0_SIZE);
pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
/* Upon Reset call user call back */
pdev->dev_state = USBD_STATE_DEFAULT;
if (pdev->pClassData)
pdev->pClass->DeInit(pdev, pdev->dev_config);
return USBD_OK;
}
/**
* @brief USBD_SetSpeed
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
{
pdev->dev_speed = speed;
return USBD_OK;
}
/**
* @brief USBD_Suspend
* Handle Suspend event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_Suspend(USBD_HandleTypeDef *pdev)
{
if ((pdev->dev_state > USBD_STATE_DEFAULT) &&
(pdev->dev_state < USBD_STATE_SUSPENDED))
{
pdev->dev_old_state = pdev->dev_state;
pdev->dev_state = USBD_STATE_SUSPENDED;
Upstream_StateMachine_Suspend();
}
return USBD_OK;
}
/**
* @brief USBD_Resume
* Handle Resume event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_Resume(USBD_HandleTypeDef *pdev)
{
pdev->dev_state = pdev->dev_old_state;
if (pdev->dev_old_state > USBD_STATE_DEFAULT)
{
Upstream_StateMachine_CheckResume();
}
return USBD_OK;
}
/**
* @brief USBD_SOF
* Handle SOF event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_SOF(USBD_HandleTypeDef *pdev)
{
if(pdev->dev_state == USBD_STATE_CONFIGURED)
{
if(pdev->pClass->SOF != NULL)
{
pdev->pClass->SOF(pdev);
}
}
return USBD_OK;
}
/**
* @brief USBD_IsoINIncomplete
* Handle iso in incomplete event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
UNUSED(pdev);
return USBD_OK;
}
/**
* @brief USBD_IsoOUTIncomplete
* Handle iso out incomplete event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
UNUSED(pdev);
return USBD_OK;
}
/**
* @brief USBD_DevConnected
* Handle device connection event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_DevConnected(USBD_HandleTypeDef *pdev)
{
UNUSED(pdev);
return USBD_OK;
}
/**
* @brief USBD_DevDisconnected
* Handle device disconnection event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_DevDisconnected(USBD_HandleTypeDef *pdev)
{
/* Free Class Resources */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->pClass->DeInit(pdev, pdev->dev_config);
return USBD_OK;
}
USBD_StatusTypeDef USBD_BufferFreed(USBD_HandleTypeDef *pdev)
{
if(pdev->pClass->FreeDataBuffer != NULL)
{
pdev->pClass->FreeDataBuffer(pdev);
}
return USBD_OK;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/