Ultimate ECP5 Board. Fork Sand fork of https://github.com/daveshah1/TrellisBoard
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Jeff Moe
0a4391bdef
|
5 years ago | |
|---|---|---|
| gateware | 5 years ago | |
| hardware | 5 years ago | |
| .gitignore | 5 years ago | |
| .gitmodules | 6 years ago | |
| COPYING | 6 years ago | |
| README.md | 5 years ago | |
README.md
Ultimate ECP5 Board
Fork Sand Fork
This is a fork/clone by Fork Sand, Inc. of upstream repo:
https://github.com/daveshah1/TrellisBoard
Upstream README
WIP - Rev 1.0 prototypes currently under test...
Key Features
- Largest ECP5; LFE5UM5G-85F
- PCIe 2.0 x2 card edge connector on two SERDES channels
- Remaining two SERDES channels on M.2 E-key connector
- 1GByte x32 DDR3L (two x16 chips)
- Dedicated HDMI output, using TFP410 serialiser
- 1000BASE-T GbE connector with RGMII PHY
- USB-A 2.0 host connector with ULPI PHY
- FT2232H for debug JTAG and UART/FIFO with type-C connector
- PCIe, external 12V or USB power input
- 12 bicolour (tristate) user LEDs, 4 user buttons, 8 user DIP switches
- 128Mbit QSPI flash for boot and data
- microSD card connector
- Dual PMOD connector with extra "middle" IO pins
- As many remaining IO as possible on high speed FFC connectors with a differential optimised pinout (3x 24 IO). Selectable 1.8V/2.5V/3.3V
Layout
- PCIe card form factor
- At least Ethernet, USB-A, USB type-C power/debug and HDMI out
- Other connectors probably would have to be on other sides. FFC connectors probably on top so they can loop over to another card to form a 2-slot card (e.g. with ADCs/DACs for SDR/DAQ)
Possible accessories using high-speed FFC connectors
- MIPI DSI smartphone-style LCDs
- MIPI CSI-2 cameras
- High speed ADC/DAC
- HDMI in/out, direct or using serialiser chip
- LVDS video in/out for LCDs or block cameras
- Breakout board to dual or triple PMOD