footprints: SD card 3D model SCHD3A100.scad

footprints/micro-sd/micro-sd-schd3a0100.3dshapes/SCHD3A100.scad

@@ -0,0 +1,53 @@
+dim=[12.43,16.8,1.7]; // base dimensions
+above=0.0; // base above the PCB clearance
+color_base=[0.2,0.1,0.1];
+
+dim_pin_small=[1.1,0.4,0.1];
+pos_pin_small=[
+  [-dim[0]/2-dim_pin_small[0]/2,dim[1]/2-2.75,0.05],
+  [ dim[0]/2+dim_pin_small[0]/2,dim[1]/2-14.45,0.05]
+];
+
+dim_pin_big=[1.1,1.4,0.1];
+pos_pin_big=[
+  [-dim[0]/2-dim_pin_big[0]/2,dim[1]/2-4.45,0.05],
+  [ dim[0]/2+dim_pin_big[0]/2,dim[1]/2-4.45,0.05],
+  [-dim[0]/2-dim_pin_big[0]/2,dim[1]/2-12.75,0.05],
+  [ dim[0]/2+dim_pin_big[0]/2,dim[1]/2-12.75,0.05]
+];
+color_pin="white";
+
+module SCHD3A100()
+{
+  translate([0,0,dim[2]/2+above])
+    difference()
+    {
+      color(color_base)
+        cube(dim, center=true);
+      // cut SD card area
+      translate([0,0,dim[2]/2-1/2+0.01])
+        color(color_base)
+          cube([11,15,1],center=true);
+      // cut pin soldering area
+      translate([-1.3/2,dim[1]/2-10.15,0])
+        color(color_base)
+          cube([8.9,2,4],center=true);
+      // cut pin spring area
+      translate([-1.3/2,dim[1]/2-5,0])
+        color(color_base)
+          cube([8.9,6,4],center=true);
+    }
+    
+    for(i=[0:len(pos_pin_big)-1])
+    translate(pos_pin_big[i])
+      color(color_pin)
+        cube(dim_pin_big,center=true);
+
+    for(i=[0:len(pos_pin_small)-1])
+    translate(pos_pin_small[i])
+      color(color_pin)
+        cube(dim_pin_small,center=true);
+
+}
+
+SCHD3A100();