99 Commits (39034db585dd01575edf16810b02b618f36443b0)

Author	SHA1	Message	Date
Emard	cc1a8def35	footprints: SD card 3D model converted to VRML SCHD3A100.wrl	7 years ago
Emard	0581b182b3	footprints: SD card 3D model SCHD3A100.scad	7 years ago
Emard	7179be234d	footprints: return of sot96-1 (RTC chip)	7 years ago
Emard	18836b07be	footprints: return of SCHD3A100	7 years ago
Emard	d8848fb642	footprint: abs25 clearly mark pin 1 on silkscreen	7 years ago
Emard	602ba8e48a	footprints 3d: abs25 32768Hz crystal converted to VRML	7 years ago
Emard	256c98e501	footprints 3d: abs25 32768Hz crystal scad model	7 years ago
davor	228c54f6c1	dipswitch 3D model improved and simplified	7 years ago
davor	bd46654f16	footprint 3D: oscxo scad and wrl file	7 years ago
davor	3a5586ef7c	footprints 3d: TSOP54 for sdram: VRML file which works, ... need to scale XYZ 0.3937, rotate Z 90	7 years ago
davor	53097276a8	footprints 3d: TSOP54 for sdram. Import to FreeCAD, save as freecad ... file, close, open, export as VRML	7 years ago
davor	9fdfb34993	footprint: dipswitch 3D model update	7 years ago
davor	0277b4009b	SMD dipswitch model converted to VRML (dipswitch_smd.wrl) ... and included in 3D viewer. scale and orientation is wrong, currently fixed in PCB 3D model parameters	7 years ago
davor	0659579e51	dipswitch_smd.scad: update required scaling factor	7 years ago
davor	1b550f4b24	footprint dip switch openscad model. ... needs yet to be converted to kicad compatible vrml	7 years ago
Emard	d581ae364c	footprints: return of the audio jack	7 years ago
davor	a445fe7a35	footprint: SD card footprint dissapeared, this kicad library ... editor is either crap or I'll never learn how to use it properly or both	7 years ago
Emard	07f62a2420	footprint: SDRAM TSOP-54 footprint made more wide	7 years ago
Emard	053bf2d90c	footprint: sdram TSOP-54 pitch now 0.808 mm	7 years ago
Emard	ac07b63744	footprint sdram pin pitch increased 0.8 mm -> 0.8077 mm ... Physical chips have total pin center spacing of 21 mm while at 0.8 mm pitch it would be 20.8 mm, 0.2 mm different at the side.	7 years ago
Emard	9fff92f938	footprint: SOA008 SPI flash, cypress version of SOIC-8 150mil	7 years ago
Emard	e7fc939612	footprint: I2C SM8 updated, pin1 marked rectangular others oval	7 years ago
Emard	53358189b8	footprint SOT96-1, updated with precise pads location and ... pad1 rectangular, other pads oval	7 years ago
Emard	05306dbed2	footprint SD card: proper rotation about exact 0,0 origin	7 years ago
Emard	3ea8206f48	Revert "footprint: SD card slot oriented according to physical tape and reel appearance." ... This reverts commit 8df4be2ab6. Origin of rotation wasn't properly set to 0,0	7 years ago
Emard	bae399b4ca	hdmi oriented according to tape and reel	7 years ago
Emard	8df4be2ab6	footprint: SD card slot oriented according to physical tape and reel appearance.	7 years ago
Emard	00e0f7da15	footprint audio jack dimensions and orientation adjusted ... according to datasheet. Center position not sure, tape and reel information not found.	7 years ago
Emard	55f4a44ee5	I2C SM8 footprint properly oriented from TI tape and reel datasheet	7 years ago
Emard	820064c65e	NXP RTC SOT96-1 package, same as SOIC-8 but oriented with pin 1 ... in upper left quadrant, according to NXP SOT96-1 tape and reel datasheet	7 years ago
Emard	afa3ace80b	esp-32 3D model	7 years ago
Emard	702be2aa9e	FPGA chip bank 0: swap sides A9<->B10 (true-complement was wrong)	7 years ago
Emard	35b3a8b3dd	changing to 45F which is production device now ... schem symbol 45F fixed typo T8->T7 (GND) and SERDES	7 years ago
Emard	ba4c8e8d22	PCB v1.6 SDRAM fully reworked	7 years ago
davor	9d8be27731	logo "HRVATSKI PROIZVOD" enlarged and moved towards audio connector	7 years ago
davor	220f575442	schematic "power" sheet and footprint cosmetics	7 years ago
davor	1ea88bda53	Adding pins to schematic symbols for all chips in unit "H" (SERDES) ... Non-serdes chips need GND connection on unit "H". "power" sheet now connects GND's at unit "H".	7 years ago
davor	8f452e4d43	filling up serdes block 50,51 for UM85F, halway done. ... VCC are also planned to be moved to that block	7 years ago
davor	fffde2cf88	Additional GND for 85F chips	7 years ago
davor	6c23919a2d	Schematic symbol for 12F. Currently just a copy of 25F ... and checked bank0 pinout, and randomly power bank seems to fit at first glance.	7 years ago
davor	e4fc99887e	moving GND and VCC on schematics symbols to ... common locations for planned PCB which supports upgrade path for example 12F->25F->45F->85F and if possible ECP5U->ECP5UM	7 years ago
Emard	151cf46186	added missing jumper footprint	7 years ago
davor	77b35c7bd2	battery, remove silkscreen printing from the pad ... and other small silkscreen updates	7 years ago
Emard	b6f388d228	ESP-32S footprint changed to avoid ... silkscreen writing over the pads, small cosmetics around	7 years ago
Emard	cf8da0d984	Logos EMARD, RADIONA, RIZ, FER, HRVATSKI PROIZVOD ... Gerbers update	7 years ago
Emard	a913ffb675	Micro SD outline moved to correct layer (b.mask->f.fab)	7 years ago
Emard	ae1aee7f5e	Micro SD contacts were OK for SCHD3A100. ... Readme update. Silkscreen outline drawn.	7 years ago
davor	52c02d540c	Footprint ALPS SCHD3A0100 (obsolete but traditionally good)	7 years ago
davor	cb69b2cc9a	ECP5 85E schematic footprint	7 years ago
davor	3aac13deb4	footprint for ECP5: ... fix 25E device, small pin naming swapping BANK0 one pin A/B new 45E device, modified pin names to fit (needs more review) new 85E device but pin names are wrong (need more work)	7 years ago