7179be234d
footprints: return of sot96-1 (RTC chip)
7 years ago
18836b07be
footprints: return of SCHD3A100
7 years ago
d8848fb642
footprint: abs25 clearly mark pin 1 on silkscreen
7 years ago
602ba8e48a
footprints 3d: abs25 32768Hz crystal converted to VRML
7 years ago
256c98e501
footprints 3d: abs25 32768Hz crystal scad model
7 years ago
228c54f6c1
dipswitch 3D model improved and simplified
7 years ago
bd46654f16
footprint 3D: oscxo scad and wrl file
7 years ago
3a5586ef7c
footprints 3d: TSOP54 for sdram: VRML file which works,
...
need to scale XYZ 0.3937, rotate Z 90
7 years ago
53097276a8
footprints 3d: TSOP54 for sdram. Import to FreeCAD, save as freecad
...
file, close, open, export as VRML
7 years ago
9fdfb34993
footprint: dipswitch 3D model update
7 years ago
0277b4009b
SMD dipswitch model converted to VRML (dipswitch_smd.wrl)
...
and included in 3D viewer. scale and orientation is wrong,
currently fixed in PCB 3D model parameters
7 years ago
0659579e51
dipswitch_smd.scad: update required scaling factor
7 years ago
1b550f4b24
footprint dip switch openscad model.
...
needs yet to be converted to kicad compatible vrml
7 years ago
d581ae364c
footprints: return of the audio jack
7 years ago
a445fe7a35
footprint: SD card footprint dissapeared, this kicad library
...
editor is either crap or I'll never learn how to use it properly
or both
7 years ago
07f62a2420
footprint: SDRAM TSOP-54 footprint made more wide
7 years ago
053bf2d90c
footprint: sdram TSOP-54 pitch now 0.808 mm
7 years ago
ac07b63744
footprint sdram pin pitch increased 0.8 mm -> 0.8077 mm
...
Physical chips have total pin center spacing of 21 mm while
at 0.8 mm pitch it would be 20.8 mm, 0.2 mm different at the side.
7 years ago
9fff92f938
footprint: SOA008 SPI flash, cypress version of SOIC-8 150mil
7 years ago
e7fc939612
footprint: I2C SM8 updated, pin1 marked rectangular others oval
7 years ago
53358189b8
footprint SOT96-1, updated with precise pads location and
...
pad1 rectangular, other pads oval
7 years ago
05306dbed2
footprint SD card: proper rotation about exact 0,0 origin
7 years ago
3ea8206f48
Revert "footprint: SD card slot oriented according to physical tape and reel appearance."
...
This reverts commit 8df4be2ab6
7 years ago
bae399b4ca
hdmi oriented according to tape and reel
7 years ago
8df4be2ab6
footprint: SD card slot oriented according to physical tape and reel appearance.
7 years ago
00e0f7da15
footprint audio jack dimensions and orientation adjusted
...
according to datasheet. Center position not sure, tape and reel
information not found.
7 years ago
55f4a44ee5
I2C SM8 footprint properly oriented from TI tape and reel datasheet
7 years ago
820064c65e
NXP RTC SOT96-1 package, same as SOIC-8 but oriented with pin 1
...
in upper left quadrant, according to NXP SOT96-1 tape and reel datasheet
7 years ago
afa3ace80b
esp-32 3D model
7 years ago
702be2aa9e
FPGA chip bank 0: swap sides A9<->B10 (true-complement was wrong)
7 years ago
35b3a8b3dd
changing to 45F which is production device now
...
schem symbol 45F fixed typo T8->T7 (GND) and SERDES
7 years ago
ba4c8e8d22
PCB v1.6 SDRAM fully reworked
7 years ago
9d8be27731
logo "HRVATSKI PROIZVOD" enlarged and moved towards audio connector
7 years ago
220f575442
schematic "power" sheet and footprint cosmetics
7 years ago
1ea88bda53
Adding pins to schematic symbols for all chips in unit "H" (SERDES)
...
Non-serdes chips need GND connection on unit "H".
"power" sheet now connects GND's at unit "H".
7 years ago
8f452e4d43
filling up serdes block 50,51 for UM85F, halway done.
...
VCC are also planned to be moved to that block
7 years ago
fffde2cf88
Additional GND for 85F chips
7 years ago
6c23919a2d
Schematic symbol for 12F. Currently just a copy of 25F
...
and checked bank0 pinout, and randomly power bank seems to fit
at first glance.
7 years ago
e4fc99887e
moving GND and VCC on schematics symbols to
...
common locations for planned PCB which
supports upgrade path for example
12F->25F->45F->85F and if possible ECP5U->ECP5UM
7 years ago
151cf46186
added missing jumper footprint
7 years ago
77b35c7bd2
battery, remove silkscreen printing from the pad
...
and other small silkscreen updates
7 years ago
b6f388d228
ESP-32S footprint changed to avoid
...
silkscreen writing over the pads,
small cosmetics around
7 years ago
cf8da0d984
Logos EMARD, RADIONA, RIZ, FER, HRVATSKI PROIZVOD
...
Gerbers update
7 years ago
a913ffb675
Micro SD outline moved to correct layer (b.mask->f.fab)
7 years ago
ae1aee7f5e
Micro SD contacts were OK for SCHD3A100.
...
Readme update.
Silkscreen outline drawn.
7 years ago
52c02d540c
Footprint ALPS SCHD3A0100 (obsolete but traditionally good)
7 years ago
cb69b2cc9a
ECP5 85E schematic footprint
7 years ago
3aac13deb4
footprint for ECP5:
...
fix 25E device, small pin naming swapping BANK0 one pin A/B
new 45E device, modified pin names to fit (needs more review)
new 85E device but pin names are wrong (need more work)
7 years ago
732323094c
BGA footprint: silkscreen ticks for verification
...
of relative alignment between BGA silkscreen and the pads
7 years ago
d463d17f18
32768Hz crystal ABS25 footprint now correct
7 years ago
Emard