PCB for ULX3S FPGA R&D board. Fork Sand fork of https://github.com/emard/ulx3s https://www.forksand.com/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
davor e9825a4105
enlarging the board for 7x2.54 mm to fit triple protoboard
8 years ago
doc oled pinput 8 years ago
footprints small edits 8 years ago
pic using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
plot gerber update 8 years ago
.gitignore gitignore intermediate files of freeroute 8 years ago
README.md readme update 8 years ago
analog.bak small edits 8 years ago
analog.sch adding 25 MHz oscillator and moving some parts around 8 years ago
blinkey.bak small edits 8 years ago
blinkey.sch adding 25 MHz oscillator and moving some parts around 8 years ago
flash.bak small edits 8 years ago
flash.sch adding 25 MHz oscillator and moving some parts around 8 years ago
fp-lib-table place oled symbol on pcb 8 years ago
gpdi.bak renaming clocks 8 years ago
gpdi.sch renaming clocks 8 years ago
gpio.bak small edits 8 years ago
gpio.sch adding 25 MHz oscillator and moving some parts around 8 years ago
power.bak renaming clocks 8 years ago
power.sch renaming clocks 8 years ago
ram.bak small edits 8 years ago
ram.sch adding 25 MHz oscillator and moving some parts around 8 years ago
sdcard.bak small edits 8 years ago
sdcard.sch adding 25 MHz oscillator and moving some parts around 8 years ago
ulx3s-cache.lib small edits 8 years ago
ulx3s-rescue.lib updating pins for BANK1 (still incomplete) 8 years ago
ulx3s.bak small edits 8 years ago
ulx3s.kicad_pcb enlarging the board for 7x2.54 mm to fit triple protoboard 8 years ago
ulx3s.kicad_pcb-bak enlarging the board for 7x2.54 mm to fit triple protoboard 8 years ago
ulx3s.net renaming clocks 8 years ago
ulx3s.pro Placing 40-pin connectors side-by-side, 8 years ago
ulx3s.sch adding 25 MHz oscillator and moving some parts around 8 years ago
usb.bak small edits 8 years ago
usb.sch adding 25 MHz oscillator and moving some parts around 8 years ago
wifi.bak small edits 8 years ago
wifi.sch adding 25 MHz oscillator and moving some parts around 8 years ago

README.md

ULX3S PCB

This is work-in-progress place for putting some wishes of a small FPGA board.

Instead of describing in written, it is better explained when drawn in kicad:

kicad ulx3s.pro

Currently this is only partial schematics and partial floorplanning. PCB is not routed. Some footprintes are collected and some are incomplete.

An overview if the parts will fit in the space how it will look.

From production of this, we are far, far away :)

Features

3.5 mm jack footprint

Switching voltage regulators

USB footprints without thru-holes

SPI OLED placeholder (thru hole probably)

FTDI 2232 usb-jtag chip

SPI flash chip

SDRAM chip

LEDs: 8 blinkleds, 1 usb led

RTC clock, quartz and battery

3.3V-5V I2C bidirectional level shifter for GPDI

GPDI is General Purpose Differential Interface, Electrically LVDS, mostly TMDS tolerant female receptacle more-or-less compatible with digital monitors/TVs

Todo

Completing FPGA IO bank shcematics blocks

Check SD card slot footprint

Oscillators (25/50/100 MHz)

rearrange PushButtons: 6 (2+4)

         U
A B    L D R

IR camera placeholder

OV767 color camera placeholder

2.54 mm external JTAG header