Fix LEVEL_BED_CORNERS (No leveling required)

Marlin/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -975,9 +975,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1098,9 +1098,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -961,9 +961,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -946,9 +946,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -946,9 +946,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Cartesio/Configuration.h

@@ -954,9 +954,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -965,9 +965,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Felix/Configuration.h

@@ -937,9 +937,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -937,9 +937,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h

@@ -960,9 +960,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -970,9 +970,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -959,9 +959,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -983,9 +983,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -953,9 +953,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/SCARA/Configuration.h

@@ -967,9 +967,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -986,9 +986,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -1011,9 +1011,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -984,9 +984,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1083,9 +1083,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1077,9 +1077,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1072,9 +1072,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1075,9 +1075,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1075,9 +1075,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1084,9 +1084,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -969,9 +969,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/makibox/Configuration.h

@@ -958,9 +958,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -950,9 +950,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/wt150/Configuration.h

@@ -960,9 +960,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.