forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #7448 from thinkyhead/bf1_delta_fixes

Browse Source 
Prevent damage if DELTA_HEIGHT is set badly
master
Scott Lahteine 7 years ago committed by GitHub
parent 6172f150c2 ac76101ec3
commit 06541ec885
4 changed files with 447 additions and 359 deletions
Show Stats Download Patch File Download Diff File

761
Marlin/Marlin_main.cpp
Unescape View File

@ -1409,6 +1409,9 @@ bool get_target_extruder_from_command(const uint16_t code) {
soft_endstop_max[axis] = base_max_pos(axis) + offs; soft_endstop_max[axis] = base_max_pos(axis) + offs;
} }
} }
#elif ENABLED(DELTA)
soft_endstop_min[axis] = base_min_pos(axis) + (axis == Z_AXIS ? 0 : offs);
soft_endstop_max[axis] = base_max_pos(axis) + offs;
#else #else
soft_endstop_min[axis] = base_min_pos(axis) + offs; soft_endstop_min[axis] = base_min_pos(axis) + offs;
soft_endstop_max[axis] = base_max_pos(axis) + offs; soft_endstop_max[axis] = base_max_pos(axis) + offs;
@ -1806,13 +1809,9 @@ static void clean_up_after_endstop_or_probe_move() {
} }
#endif #endif
float z_dest = LOGICAL_Z_POSITION(z_raise); float z_dest = z_raise;
if (zprobe_zoffset < 0) z_dest -= zprobe_zoffset; if (zprobe_zoffset < 0) z_dest -= zprobe_zoffset;
#if ENABLED(DELTA)
z_dest -= home_offset[Z_AXIS]; // Account for delta height adjustment
#endif
if (z_dest > current_position[Z_AXIS]) if (z_dest > current_position[Z_AXIS])
do_blocking_move_to_z(z_dest); do_blocking_move_to_z(z_dest);
} }
@ -2106,7 +2105,7 @@ static void clean_up_after_endstop_or_probe_move() {
safe_delay(BLTOUCH_DELAY); safe_delay(BLTOUCH_DELAY);
} }
void set_bltouch_deployed(const bool deploy) { bool set_bltouch_deployed(const bool deploy) {
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
bltouch_command(BLTOUCH_RESET); // try to reset it. bltouch_command(BLTOUCH_RESET); // try to reset it.
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
@ -2118,6 +2117,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_ERROR_START(); SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH); SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
stop(); // punt! stop(); // punt!
return true;
} }
} }
@ -2130,6 +2130,8 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_EOL(); SERIAL_EOL();
} }
#endif #endif
return false;
} }
#endif // BLTOUCH #endif // BLTOUCH
@ -2149,23 +2151,7 @@ static void clean_up_after_endstop_or_probe_move() {
// Make room for probe // Make room for probe
do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE); do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE);
// When deploying make sure BLTOUCH is not already triggered #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY)
#if ENABLED(BLTOUCH)
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
bltouch_command(BLTOUCH_RESET); // try to reset it.
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
bltouch_command(BLTOUCH_STOW); // clear the triggered condition.
safe_delay(1500); // wait for internal self test to complete
// measured completion time was 0.65 seconds
// after reset, deploy & stow sequence
if (TEST_BLTOUCH()) { // If it still claims to be triggered...
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
stop(); // punt!
return true;
}
}
#elif ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY)
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define _AUE_ARGS true, false, false #define _AUE_ARGS true, false, false
#else #else
@ -2236,14 +2222,21 @@ static void clean_up_after_endstop_or_probe_move() {
return false; return false;
} }
static void do_probe_move(float z, float fr_mm_m) { /**
* @brief Used by run_z_probe to do a single Z probe move.
*
* @param z Z destination
* @param fr_mm_s Feedrate in mm/s
* @return true to indicate an error
*/
static bool do_probe_move(const float z, const float fr_mm_m) {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> do_probe_move", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS(">>> do_probe_move", current_position);
#endif #endif
// Deploy BLTouch at the start of any probe // Deploy BLTouch at the start of any probe
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
set_bltouch_deployed(true); if (set_bltouch_deployed(true)) return true;
#endif #endif
#if QUIET_PROBING #if QUIET_PROBING
@ -2251,15 +2244,24 @@ static void clean_up_after_endstop_or_probe_move() {
#endif #endif
// Move down until probe triggered // Move down until probe triggered
do_blocking_move_to_z(LOGICAL_Z_POSITION(z), MMM_TO_MMS(fr_mm_m)); do_blocking_move_to_z(z, MMM_TO_MMS(fr_mm_m));
// Check to see if the probe was triggered
const bool probe_triggered = TEST(Endstops::endstop_hit_bits,
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
Z_MIN
#else
Z_MIN_PROBE
#endif
);
#if QUIET_PROBING #if QUIET_PROBING
probing_pause(false); probing_pause(false);
#endif #endif
// Retract BLTouch immediately after a probe // Retract BLTouch immediately after a probe if it was triggered
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
set_bltouch_deployed(false); if (probe_triggered && set_bltouch_deployed(false)) return true;
#endif #endif
// Clear endstop flags // Clear endstop flags
@ -2274,11 +2276,18 @@ static void clean_up_after_endstop_or_probe_move() {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position);
#endif #endif
return !probe_triggered;
} }
// Do a single Z probe and return with current_position[Z_AXIS] /**
// at the height where the probe triggered. * @details Used by probe_pt to do a single Z probe.
static float run_z_probe() { * Leaves current_position[Z_AXIS] at the height where the probe triggered.
*
* @param short_move Flag for a shorter probe move towards the bed
* @return The raw Z position where the probe was triggered
*/
static float run_z_probe(const bool short_move=true) {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
@ -2290,34 +2299,33 @@ static void clean_up_after_endstop_or_probe_move() {
#if ENABLED(PROBE_DOUBLE_TOUCH) #if ENABLED(PROBE_DOUBLE_TOUCH)
// Do a first probe at the fast speed // Do a first probe at the fast speed
do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_FAST); if (do_probe_move(-10, Z_PROBE_SPEED_FAST)) return NAN;
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
float first_probe_z = current_position[Z_AXIS]; float first_probe_z = current_position[Z_AXIS];
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("1st Probe Z:", first_probe_z); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("1st Probe Z:", first_probe_z);
#endif #endif
// move up by the bump distance // move up to make clearance for the probe
do_blocking_move_to_z(current_position[Z_AXIS] + home_bump_mm(Z_AXIS), MMM_TO_MMS(Z_PROBE_SPEED_FAST)); do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
#else #else
// If the nozzle is above the travel height then // If the nozzle is above the travel height then
// move down quickly before doing the slow probe // move down quickly before doing the slow probe
float z = LOGICAL_Z_POSITION(Z_CLEARANCE_BETWEEN_PROBES); float z = Z_CLEARANCE_DEPLOY_PROBE;
if (zprobe_zoffset < 0) z -= zprobe_zoffset; if (zprobe_zoffset < 0) z -= zprobe_zoffset;
#if ENABLED(DELTA) if (z < current_position[Z_AXIS]) {
z -= home_offset[Z_AXIS]; // Account for delta height adjustment
#endif
if (z < current_position[Z_AXIS])
do_blocking_move_to_z(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
// If we don't make it to the z position (i.e. the probe triggered), move up to make clearance for the probe
if (!do_probe_move(z, Z_PROBE_SPEED_FAST))
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
}
#endif #endif
// move down slowly to find bed // move down slowly to find bed
do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_SLOW); if (do_probe_move(-10 + (short_move ? 0 : -(Z_MAX_LENGTH)), Z_PROBE_SPEED_SLOW)) return NAN;
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position);
@ -2330,6 +2338,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]); SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]);
} }
#endif #endif
return RAW_CURRENT_POSITION(Z) + zprobe_zoffset return RAW_CURRENT_POSITION(Z) + zprobe_zoffset
#if ENABLED(DELTA) #if ENABLED(DELTA)
+ home_offset[Z_AXIS] // Account for delta height adjustment + home_offset[Z_AXIS] // Account for delta height adjustment
@ -2372,22 +2381,31 @@ static void clean_up_after_endstop_or_probe_move() {
do_blocking_move_to_z(delta_clip_start_height); do_blocking_move_to_z(delta_clip_start_height);
#endif #endif
// Ensure a minimum height before moving the probe #if HAS_SOFTWARE_ENDSTOPS
do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES); // Store the status of the soft endstops and disable if we're probing a non-printable location
static bool enable_soft_endstops = soft_endstops_enabled;
if (!printable) soft_endstops_enabled = false;
#endif
feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S; feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S;
// Move the probe to the given XY // Move the probe to the given XY
do_blocking_move_to_xy(nx, ny); do_blocking_move_to_xy(nx, ny);
if (DEPLOY_PROBE()) return NAN; float measured_z = NAN;
if (!DEPLOY_PROBE()) {
measured_z = run_z_probe(printable);
const float measured_z = run_z_probe(); if (!stow)
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
else
if (STOW_PROBE()) measured_z = NAN;
}
if (!stow) #if HAS_SOFTWARE_ENDSTOPS
do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES); // Restore the soft endstop status
else soft_endstops_enabled = enable_soft_endstops;
if (STOW_PROBE()) return NAN; #endif
if (verbose_level > 2) { if (verbose_level > 2) {
SERIAL_PROTOCOLPGM("Bed X: "); SERIAL_PROTOCOLPGM("Bed X: ");
@ -2405,6 +2423,12 @@ static void clean_up_after_endstop_or_probe_move() {
feedrate_mm_s = old_feedrate_mm_s; feedrate_mm_s = old_feedrate_mm_s;
if (isnan(measured_z)) {
LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED);
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_PROBING_FAILED);
}
return measured_z; return measured_z;
} }
@ -3753,7 +3777,7 @@ inline void gcode_G4() {
* A delta can only safely home all axes at the same time * A delta can only safely home all axes at the same time
* This is like quick_home_xy() but for 3 towers. * This is like quick_home_xy() but for 3 towers.
*/ */
inline void home_delta() { inline bool home_delta() {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> home_delta", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS(">>> home_delta", current_position);
#endif #endif
@ -3762,10 +3786,21 @@ inline void gcode_G4() {
sync_plan_position(); sync_plan_position();
// Move all carriages together linearly until an endstop is hit. // Move all carriages together linearly until an endstop is hit.
current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10); current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (DELTA_HEIGHT + home_offset[Z_AXIS] + 10);
feedrate_mm_s = homing_feedrate(X_AXIS); feedrate_mm_s = homing_feedrate(X_AXIS);
line_to_current_position(); line_to_current_position();
stepper.synchronize(); stepper.synchronize();
// If an endstop was not hit, then damage can occur if homing is continued.
// This can occur if the delta height (DELTA_HEIGHT + home_offset[Z_AXIS]) is
// not set correctly.
if (!(Endstops::endstop_hit_bits & (_BV(X_MAX) | _BV(Y_MAX) | _BV(Z_MAX)))) {
LCD_MESSAGEPGM(MSG_ERR_HOMING_FAILED);
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_HOMING_FAILED);
return false;
}
endstops.hit_on_purpose(); // clear endstop hit flags endstops.hit_on_purpose(); // clear endstop hit flags
// At least one carriage has reached the top. // At least one carriage has reached the top.
@ -3785,6 +3820,8 @@ inline void gcode_G4() {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< home_delta", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS("<<< home_delta", current_position);
#endif #endif
return true;
} }
#endif // DELTA #endif // DELTA
@ -4641,10 +4678,6 @@ void home_all_axes() { gcode_G28(true); }
SYNC_PLAN_POSITION_KINEMATIC(); SYNC_PLAN_POSITION_KINEMATIC();
} }
if (!faux) setup_for_endstop_or_probe_move();
//xProbe = yProbe = measured_z = 0;
#if HAS_BED_PROBE #if HAS_BED_PROBE
// Deploy the probe. Probe will raise if needed. // Deploy the probe. Probe will raise if needed.
if (DEPLOY_PROBE()) { if (DEPLOY_PROBE()) {
@ -4653,6 +4686,8 @@ void home_all_axes() { gcode_G28(true); }
} }
#endif #endif
if (!faux) setup_for_endstop_or_probe_move();
#if ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
#if ENABLED(PROBE_MANUALLY) #if ENABLED(PROBE_MANUALLY)
@ -4865,7 +4900,7 @@ void home_all_axes() { gcode_G28(true); }
#endif // AUTO_BED_LEVELING_3POINT #endif // AUTO_BED_LEVELING_3POINT
#else // !PROBE_MANUALLY #else // !PROBE_MANUALLY
{
const bool stow_probe_after_each = parser.boolval('E'); const bool stow_probe_after_each = parser.boolval('E');
#if ABL_GRID #if ABL_GRID
@ -4873,7 +4908,7 @@ void home_all_axes() { gcode_G28(true); }
bool zig = PR_OUTER_END & 1; // Always end at RIGHT and BACK_PROBE_BED_POSITION bool zig = PR_OUTER_END & 1; // Always end at RIGHT and BACK_PROBE_BED_POSITION
// Outer loop is Y with PROBE_Y_FIRST disabled // Outer loop is Y with PROBE_Y_FIRST disabled
for (uint8_t PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_END; PR_OUTER_VAR++) { for (uint8_t PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_END && !isnan(measured_z); PR_OUTER_VAR++) {
int8_t inStart, inStop, inInc; int8_t inStart, inStop, inInc;
@ -4912,7 +4947,7 @@ void home_all_axes() { gcode_G28(true); }
if (isnan(measured_z)) { if (isnan(measured_z)) {
planner.abl_enabled = abl_should_enable; planner.abl_enabled = abl_should_enable;
return; break;
} }
#if ENABLED(AUTO_BED_LEVELING_LINEAR) #if ENABLED(AUTO_BED_LEVELING_LINEAR)
@ -4948,12 +4983,12 @@ void home_all_axes() { gcode_G28(true); }
measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level); measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
if (isnan(measured_z)) { if (isnan(measured_z)) {
planner.abl_enabled = abl_should_enable; planner.abl_enabled = abl_should_enable;
return; break;
} }
points[i].z = measured_z; points[i].z = measured_z;
} }
if (!dryrun) { if (!dryrun && !isnan(measured_z)) {
vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal(); vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal();
if (planeNormal.z < 0) { if (planeNormal.z < 0) {
planeNormal.x *= -1; planeNormal.x *= -1;
@ -4971,9 +5006,9 @@ void home_all_axes() { gcode_G28(true); }
// Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe. // Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe.
if (STOW_PROBE()) { if (STOW_PROBE()) {
planner.abl_enabled = abl_should_enable; planner.abl_enabled = abl_should_enable;
return; measured_z = NAN;
} }
}
#endif // !PROBE_MANUALLY #endif // !PROBE_MANUALLY
// //
@ -4986,9 +5021,6 @@ void home_all_axes() { gcode_G28(true); }
// return or loop before this point. // return or loop before this point.
// //
// Restore state after probing
if (!faux) clean_up_after_endstop_or_probe_move();
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position);
#endif #endif
@ -5001,114 +5033,91 @@ void home_all_axes() { gcode_G28(true); }
#endif #endif
// Calculate leveling, print reports, correct the position // Calculate leveling, print reports, correct the position
#if ENABLED(AUTO_BED_LEVELING_BILINEAR) if (!isnan(measured_z)) {
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (!dryrun) extrapolate_unprobed_bed_level(); if (!dryrun) extrapolate_unprobed_bed_level();
print_bilinear_leveling_grid(); print_bilinear_leveling_grid();
refresh_bed_level(); refresh_bed_level();
#if ENABLED(ABL_BILINEAR_SUBDIVISION) #if ENABLED(ABL_BILINEAR_SUBDIVISION)
bed_level_virt_print(); bed_level_virt_print();
#endif #endif
#elif ENABLED(AUTO_BED_LEVELING_LINEAR) #elif ENABLED(AUTO_BED_LEVELING_LINEAR)
// For LINEAR leveling calculate matrix, print reports, correct the position // For LINEAR leveling calculate matrix, print reports, correct the position
/** /**
* solve the plane equation ax + by + d = z * solve the plane equation ax + by + d = z
* A is the matrix with rows [x y 1] for all the probed points * A is the matrix with rows [x y 1] for all the probed points
* B is the vector of the Z positions * B is the vector of the Z positions
* the normal vector to the plane is formed by the coefficients of the * the normal vector to the plane is formed by the coefficients of the
* plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0 * plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0
* so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z * so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z
*/ */
float plane_equation_coefficients[3]; float plane_equation_coefficients[3];
finish_incremental_LSF(&lsf_results); finish_incremental_LSF(&lsf_results);
plane_equation_coefficients[0] = -lsf_results.A; // We should be able to eliminate the '-' on these three lines and down below plane_equation_coefficients[0] = -lsf_results.A; // We should be able to eliminate the '-' on these three lines and down below
plane_equation_coefficients[1] = -lsf_results.B; // but that is not yet tested. plane_equation_coefficients[1] = -lsf_results.B; // but that is not yet tested.
plane_equation_coefficients[2] = -lsf_results.D; plane_equation_coefficients[2] = -lsf_results.D;
mean /= abl2; mean /= abl2;
if (verbose_level) { if (verbose_level) {
SERIAL_PROTOCOLPGM("Eqn coefficients: a: "); SERIAL_PROTOCOLPGM("Eqn coefficients: a: ");
SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8); SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8);
SERIAL_PROTOCOLPGM(" b: "); SERIAL_PROTOCOLPGM(" b: ");
SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8); SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8);
SERIAL_PROTOCOLPGM(" d: "); SERIAL_PROTOCOLPGM(" d: ");
SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8); SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8);
SERIAL_EOL();
if (verbose_level > 2) {
SERIAL_PROTOCOLPGM("Mean of sampled points: ");
SERIAL_PROTOCOL_F(mean, 8);
SERIAL_EOL(); SERIAL_EOL();
if (verbose_level > 2) {
SERIAL_PROTOCOLPGM("Mean of sampled points: ");
SERIAL_PROTOCOL_F(mean, 8);
SERIAL_EOL();
}
} }
}
// Create the matrix but don't correct the position yet
if (!dryrun)
planner.bed_level_matrix = matrix_3x3::create_look_at(
vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) // We can eliminate the '-' here and up above
);
// Show the Topography map if enabled
if (do_topography_map) {
SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n"
" +--- BACK --+\n"
" | |\n"
" L | (+) | R\n"
" E | | I\n"
" F | (-) N (+) | G\n"
" T | | H\n"
" | (-) | T\n"
" | |\n"
" O-- FRONT --+\n"
" (0,0)");
float min_diff = 999; // Create the matrix but don't correct the position yet
if (!dryrun)
for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { planner.bed_level_matrix = matrix_3x3::create_look_at(
for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) // We can eliminate the '-' here and up above
int ind = indexIntoAB[xx][yy]; );
float diff = eqnBVector[ind] - mean,
x_tmp = eqnAMatrix[ind + 0 * abl2],
y_tmp = eqnAMatrix[ind + 1 * abl2],
z_tmp = 0;
apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp);
NOMORE(min_diff, eqnBVector[ind] - z_tmp); // Show the Topography map if enabled
if (do_topography_map) {
if (diff >= 0.0) SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n"
SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment " +--- BACK --+\n"
else " | |\n"
SERIAL_PROTOCOLCHAR(' '); " L | (+) | R\n"
SERIAL_PROTOCOL_F(diff, 5); " E | | I\n"
} // xx " F | (-) N (+) | G\n"
SERIAL_EOL(); " T | | H\n"
} // yy " | (-) | T\n"
SERIAL_EOL(); " | |\n"
" O-- FRONT --+\n"
" (0,0)");
if (verbose_level > 3) { float min_diff = 999;
SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:");
for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) {
for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) {
int ind = indexIntoAB[xx][yy]; int ind = indexIntoAB[xx][yy];
float x_tmp = eqnAMatrix[ind + 0 * abl2], float diff = eqnBVector[ind] - mean,
x_tmp = eqnAMatrix[ind + 0 * abl2],
y_tmp = eqnAMatrix[ind + 1 * abl2], y_tmp = eqnAMatrix[ind + 1 * abl2],
z_tmp = 0; z_tmp = 0;
apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp);
float diff = eqnBVector[ind] - z_tmp - min_diff; NOMORE(min_diff, eqnBVector[ind] - z_tmp);
if (diff >= 0.0) if (diff >= 0.0)
SERIAL_PROTOCOLPGM(" +"); SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment
// Include + for column alignment
else else
SERIAL_PROTOCOLCHAR(' '); SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOL_F(diff, 5); SERIAL_PROTOCOL_F(diff, 5);
@ -5116,82 +5125,113 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_EOL(); SERIAL_EOL();
} // yy } // yy
SERIAL_EOL(); SERIAL_EOL();
}
} //do_topography_map
#endif // AUTO_BED_LEVELING_LINEAR if (verbose_level > 3) {
SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:");
for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) {
for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) {
int ind = indexIntoAB[xx][yy];
float x_tmp = eqnAMatrix[ind + 0 * abl2],
y_tmp = eqnAMatrix[ind + 1 * abl2],
z_tmp = 0;
apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp);
float diff = eqnBVector[ind] - z_tmp - min_diff;
if (diff >= 0.0)
SERIAL_PROTOCOLPGM(" +");
// Include + for column alignment
else
SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOL_F(diff, 5);
} // xx
SERIAL_EOL();
} // yy
SERIAL_EOL();
}
} //do_topography_map
#if ABL_PLANAR #endif // AUTO_BED_LEVELING_LINEAR
// For LINEAR and 3POINT leveling correct the current position #if ABL_PLANAR
if (verbose_level > 0) // For LINEAR and 3POINT leveling correct the current position
planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:"));
if (!dryrun) { if (verbose_level > 0)
// planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:"));
// Correct the current XYZ position based on the tilted plane.
//
#if ENABLED(DEBUG_LEVELING_FEATURE) if (!dryrun) {
if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position); //
#endif // Correct the current XYZ position based on the tilted plane.
//
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position);
#endif
float converted[XYZ]; float converted[XYZ];
COPY(converted, current_position); COPY(converted, current_position);
planner.abl_enabled = true; planner.abl_enabled = true;
planner.unapply_leveling(converted); // use conversion machinery planner.unapply_leveling(converted); // use conversion machinery
planner.abl_enabled = false; planner.abl_enabled = false;
// Use the last measured distance to the bed, if possible
if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER))
&& NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER))
) {
const float simple_z = current_position[Z_AXIS] - measured_z;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Z from Probe:", simple_z);
SERIAL_ECHOPAIR(" Matrix:", converted[Z_AXIS]);
SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - converted[Z_AXIS]);
}
#endif
converted[Z_AXIS] = simple_z;
}
// The rotated XY and corrected Z are now current_position
COPY(current_position, converted);
// Use the last measured distance to the bed, if possible
if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER))
&& NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER))
) {
const float simple_z = current_position[Z_AXIS] - measured_z;
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position);
SERIAL_ECHOPAIR("Z from Probe:", simple_z);
SERIAL_ECHOPAIR(" Matrix:", converted[Z_AXIS]);
SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - converted[Z_AXIS]);
}
#endif #endif
converted[Z_AXIS] = simple_z;
} }
// The rotated XY and corrected Z are now current_position #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
COPY(current_position, converted);
#if ENABLED(DEBUG_LEVELING_FEATURE) if (!dryrun) {
if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position); #if ENABLED(DEBUG_LEVELING_FEATURE)
#endif if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]);
} #endif
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR) // Unapply the offset because it is going to be immediately applied
// and cause compensation movement in Z
current_position[Z_AXIS] -= bilinear_z_offset(current_position);
if (!dryrun) { #if ENABLED(DEBUG_LEVELING_FEATURE)
#if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]);
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]); #endif
#endif }
// Unapply the offset because it is going to be immediately applied #endif // ABL_PLANAR
// and cause compensation movement in Z
current_position[Z_AXIS] -= bilinear_z_offset(current_position);
#ifdef Z_PROBE_END_SCRIPT
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
#endif #endif
} enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT));
stepper.synchronize();
#endif
#endif // ABL_PLANAR // Auto Bed Leveling is complete! Enable if possible.
planner.abl_enabled = dryrun ? abl_should_enable : true;
} // !isnan(measured_z)
#ifdef Z_PROBE_END_SCRIPT // Restore state after probing
#if ENABLED(DEBUG_LEVELING_FEATURE) if (!faux) clean_up_after_endstop_or_probe_move();
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
#endif
enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT));
stepper.synchronize();
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< gcode_G29"); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< gcode_G29");
@ -5201,9 +5241,6 @@ void home_all_axes() { gcode_G28(true); }
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
// Auto Bed Leveling is complete! Enable if possible.
planner.abl_enabled = dryrun ? abl_should_enable : true;
if (planner.abl_enabled) if (planner.abl_enabled)
SYNC_PLAN_POSITION_KINEMATIC(); SYNC_PLAN_POSITION_KINEMATIC();
} }
@ -5319,6 +5356,21 @@ void home_all_axes() { gcode_G28(true); }
} }
} }
void G33_cleanup(
#if HOTENDS > 1
const uint8_t old_tool_index
#endif
) {
#if ENABLED(DELTA_HOME_TO_SAFE_ZONE)
do_blocking_move_to_z(delta_clip_start_height);
#endif
STOW_PROBE();
clean_up_after_endstop_or_probe_move();
#if HOTENDS > 1
tool_change(old_tool_index, 0, true);
#endif
}
inline void gcode_G33() { inline void gcode_G33() {
const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS); const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
@ -5395,14 +5447,19 @@ void home_all_axes() { gcode_G28(true); }
#if HAS_LEVELING #if HAS_LEVELING
reset_bed_level(); // After calibration bed-level data is no longer valid reset_bed_level(); // After calibration bed-level data is no longer valid
#endif #endif
#if HOTENDS > 1 #if HOTENDS > 1
const uint8_t old_tool_index = active_extruder; const uint8_t old_tool_index = active_extruder;
tool_change(0, 0, true); tool_change(0, 0, true);
#define G33_CLEANUP() G33_cleanup(old_tool_index)
#else
#define G33_CLEANUP() G33_cleanup()
#endif #endif
setup_for_endstop_or_probe_move(); setup_for_endstop_or_probe_move();
DEPLOY_PROBE();
endstops.enable(true); endstops.enable(true);
home_delta(); if (!home_delta())
return;
endstops.not_homing(); endstops.not_homing();
// print settings // print settings
@ -5416,7 +5473,9 @@ void home_all_axes() { gcode_G28(true); }
print_G33_settings(!_1p_calibration, _7p_calibration && towers_set); print_G33_settings(!_1p_calibration, _7p_calibration && towers_set);
#if DISABLED(PROBE_MANUALLY) #if DISABLED(PROBE_MANUALLY)
home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height const float measured_z = probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height
if (isnan(measured_z)) return G33_CLEANUP();
home_offset[Z_AXIS] -= measured_z;
#endif #endif
do { do {
@ -5434,6 +5493,7 @@ void home_all_axes() { gcode_G28(true); }
z_at_pt[0] += lcd_probe_pt(0, 0); z_at_pt[0] += lcd_probe_pt(0, 0);
#else #else
z_at_pt[0] += probe_pt(dx, dy, stow_after_each, 1, false); z_at_pt[0] += probe_pt(dx, dy, stow_after_each, 1, false);
if (isnan(z_at_pt[0])) return G33_CLEANUP();
#endif #endif
} }
if (_7p_calibration) { // probe extra center points if (_7p_calibration) { // probe extra center points
@ -5442,7 +5502,8 @@ void home_all_axes() { gcode_G28(true); }
#if ENABLED(PROBE_MANUALLY) #if ENABLED(PROBE_MANUALLY)
z_at_pt[0] += lcd_probe_pt(cos(a) * r, sin(a) * r); z_at_pt[0] += lcd_probe_pt(cos(a) * r, sin(a) * r);
#else #else
z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false); z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1);
if (isnan(z_at_pt[0])) return G33_CLEANUP();
#endif #endif
} }
z_at_pt[0] /= float(_7p_double_circle ? 7 : probe_points); z_at_pt[0] /= float(_7p_double_circle ? 7 : probe_points);
@ -5462,7 +5523,8 @@ void home_all_axes() { gcode_G28(true); }
#if ENABLED(PROBE_MANUALLY) #if ENABLED(PROBE_MANUALLY)
z_at_pt[axis] += lcd_probe_pt(cos(a) * r, sin(a) * r); z_at_pt[axis] += lcd_probe_pt(cos(a) * r, sin(a) * r);
#else #else
z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false); z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1);
if (isnan(z_at_pt[axis])) return G33_CLEANUP();
#endif #endif
} }
zig_zag = !zig_zag; zig_zag = !zig_zag;
@ -5662,14 +5724,7 @@ void home_all_axes() { gcode_G28(true); }
} }
while ((zero_std_dev < test_precision && zero_std_dev > calibration_precision && iterations < 31) || iterations <= force_iterations); while ((zero_std_dev < test_precision && zero_std_dev > calibration_precision && iterations < 31) || iterations <= force_iterations);
#if ENABLED(DELTA_HOME_TO_SAFE_ZONE) G33_CLEANUP();
do_blocking_move_to_z(delta_clip_start_height);
#endif
STOW_PROBE();
clean_up_after_endstop_or_probe_move();
#if HOTENDS > 1
tool_change(old_tool_index, 0, true);
#endif
} }
#endif // DELTA_AUTO_CALIBRATION #endif // DELTA_AUTO_CALIBRATION
@ -6980,152 +7035,159 @@ inline void gcode_M42() {
setup_for_endstop_or_probe_move(); setup_for_endstop_or_probe_move();
double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples];
// Move to the first point, deploy, and probe // Move to the first point, deploy, and probe
const float t = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level); const float t = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level);
if (isnan(t)) return; bool probing_good = !isnan(t);
randomSeed(millis()); if (probing_good) {
randomSeed(millis());
double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples];
for (uint8_t n = 0; n < n_samples; n++) {
if (n_legs) {
const int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise
float angle = random(0.0, 360.0);
const float radius = random(
#if ENABLED(DELTA)
0.1250000000 * (DELTA_PROBEABLE_RADIUS),
0.3333333333 * (DELTA_PROBEABLE_RADIUS)
#else
5.0, 0.125 * min(X_BED_SIZE, Y_BED_SIZE)
#endif
);
for (uint8_t n = 0; n < n_samples; n++) { if (verbose_level > 3) {
if (n_legs) { SERIAL_ECHOPAIR("Starting radius: ", radius);
const int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise SERIAL_ECHOPAIR(" angle: ", angle);
float angle = random(0.0, 360.0); SERIAL_ECHOPGM(" Direction: ");
const float radius = random( if (dir > 0) SERIAL_ECHOPGM("Counter-");
#if ENABLED(DELTA) SERIAL_ECHOLNPGM("Clockwise");
0.1250000000 * (DELTA_PROBEABLE_RADIUS), }
0.3333333333 * (DELTA_PROBEABLE_RADIUS)
#else
5.0, 0.125 * min(X_BED_SIZE, Y_BED_SIZE)
#endif
);
if (verbose_level > 3) {
SERIAL_ECHOPAIR("Starting radius: ", radius);
SERIAL_ECHOPAIR(" angle: ", angle);
SERIAL_ECHOPGM(" Direction: ");
if (dir > 0) SERIAL_ECHOPGM("Counter-");
SERIAL_ECHOLNPGM("Clockwise");
}
for (uint8_t l = 0; l < n_legs - 1; l++) { for (uint8_t l = 0; l < n_legs - 1; l++) {
double delta_angle; double delta_angle;
if (schizoid_flag) if (schizoid_flag)
// The points of a 5 point star are 72 degrees apart. We need to // The points of a 5 point star are 72 degrees apart. We need to
// skip a point and go to the next one on the star. // skip a point and go to the next one on the star.
delta_angle = dir * 2.0 * 72.0; delta_angle = dir * 2.0 * 72.0;
else else
// If we do this line, we are just trying to move further // If we do this line, we are just trying to move further
// around the circle. // around the circle.
delta_angle = dir * (float) random(25, 45); delta_angle = dir * (float) random(25, 45);
angle += delta_angle; angle += delta_angle;
while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the
angle -= 360.0; // Arduino documentation says the trig functions should not be given values angle -= 360.0; // Arduino documentation says the trig functions should not be given values
while (angle < 0.0) // outside of this range. It looks like they behave correctly with while (angle < 0.0) // outside of this range. It looks like they behave correctly with
angle += 360.0; // numbers outside of the range, but just to be safe we clamp them. angle += 360.0; // numbers outside of the range, but just to be safe we clamp them.
X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius; X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius;
Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius; Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius;
#if DISABLED(DELTA) #if DISABLED(DELTA)
X_current = constrain(X_current, X_MIN_POS, X_MAX_POS); X_current = constrain(X_current, X_MIN_POS, X_MAX_POS);
Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS); Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS);
#else #else
// If we have gone out too far, we can do a simple fix and scale the numbers // If we have gone out too far, we can do a simple fix and scale the numbers
// back in closer to the origin. // back in closer to the origin.
while (!position_is_reachable_by_probe_xy(X_current, Y_current)) { while (!position_is_reachable_by_probe_xy(X_current, Y_current)) {
X_current *= 0.8; X_current *= 0.8;
Y_current *= 0.8; Y_current *= 0.8;
if (verbose_level > 3) { if (verbose_level > 3) {
SERIAL_ECHOPAIR("Pulling point towards center:", X_current); SERIAL_ECHOPAIR("Pulling point towards center:", X_current);
SERIAL_ECHOLNPAIR(", ", Y_current); SERIAL_ECHOLNPAIR(", ", Y_current);
}
} }
#endif
if (verbose_level > 3) {
SERIAL_PROTOCOLPGM("Going to:");
SERIAL_ECHOPAIR(" X", X_current);
SERIAL_ECHOPAIR(" Y", Y_current);
SERIAL_ECHOLNPAIR(" Z", current_position[Z_AXIS]);
} }
#endif do_blocking_move_to_xy(X_current, Y_current);
if (verbose_level > 3) { } // n_legs loop
SERIAL_PROTOCOLPGM("Going to:"); } // n_legs
SERIAL_ECHOPAIR(" X", X_current);
SERIAL_ECHOPAIR(" Y", Y_current);
SERIAL_ECHOLNPAIR(" Z", current_position[Z_AXIS]);
}
do_blocking_move_to_xy(X_current, Y_current);
} // n_legs loop
} // n_legs
// Probe a single point // Probe a single point
sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, 0); sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, 0);
/** // Break the loop if the probe fails
* Get the current mean for the data points we have so far probing_good = !isnan(sample_set[n]);
*/ if (!probing_good) break;
double sum = 0.0;
for (uint8_t j = 0; j <= n; j++) sum += sample_set[j];
mean = sum / (n + 1);
NOMORE(min, sample_set[n]); /**
NOLESS(max, sample_set[n]); * Get the current mean for the data points we have so far
*/
double sum = 0.0;
for (uint8_t j = 0; j <= n; j++) sum += sample_set[j];
mean = sum / (n + 1);
/** NOMORE(min, sample_set[n]);
* Now, use that mean to calculate the standard deviation for the NOLESS(max, sample_set[n]);
* data points we have so far
*/
sum = 0.0;
for (uint8_t j = 0; j <= n; j++)
sum += sq(sample_set[j] - mean);
sigma = SQRT(sum / (n + 1)); /**
if (verbose_level > 0) { * Now, use that mean to calculate the standard deviation for the
if (verbose_level > 1) { * data points we have so far
SERIAL_PROTOCOL(n + 1); */
SERIAL_PROTOCOLPGM(" of "); sum = 0.0;
SERIAL_PROTOCOL((int)n_samples); for (uint8_t j = 0; j <= n; j++)
SERIAL_PROTOCOLPGM(": z: "); sum += sq(sample_set[j] - mean);
SERIAL_PROTOCOL_F(sample_set[n], 3);
if (verbose_level > 2) { sigma = SQRT(sum / (n + 1));
SERIAL_PROTOCOLPGM(" mean: "); if (verbose_level > 0) {
SERIAL_PROTOCOL_F(mean, 4); if (verbose_level > 1) {
SERIAL_PROTOCOLPGM(" sigma: "); SERIAL_PROTOCOL(n + 1);
SERIAL_PROTOCOL_F(sigma, 6); SERIAL_PROTOCOLPGM(" of ");
SERIAL_PROTOCOLPGM(" min: "); SERIAL_PROTOCOL((int)n_samples);
SERIAL_PROTOCOL_F(min, 3); SERIAL_PROTOCOLPGM(": z: ");
SERIAL_PROTOCOLPGM(" max: "); SERIAL_PROTOCOL_F(sample_set[n], 3);
SERIAL_PROTOCOL_F(max, 3); if (verbose_level > 2) {
SERIAL_PROTOCOLPGM(" range: "); SERIAL_PROTOCOLPGM(" mean: ");
SERIAL_PROTOCOL_F(max-min, 3); SERIAL_PROTOCOL_F(mean, 4);
SERIAL_PROTOCOLPGM(" sigma: ");
SERIAL_PROTOCOL_F(sigma, 6);
SERIAL_PROTOCOLPGM(" min: ");
SERIAL_PROTOCOL_F(min, 3);
SERIAL_PROTOCOLPGM(" max: ");
SERIAL_PROTOCOL_F(max, 3);
SERIAL_PROTOCOLPGM(" range: ");
SERIAL_PROTOCOL_F(max-min, 3);
}
SERIAL_EOL();
} }
SERIAL_EOL();
} }
}
} // End of probe loop } // n_samples loop
}
STOW_PROBE();
if (STOW_PROBE()) return; if (probing_good) {
SERIAL_PROTOCOLLNPGM("Finished!");
SERIAL_PROTOCOLPGM("Finished!"); if (verbose_level > 0) {
SERIAL_EOL(); SERIAL_PROTOCOLPGM("Mean: ");
SERIAL_PROTOCOL_F(mean, 6);
SERIAL_PROTOCOLPGM(" Min: ");
SERIAL_PROTOCOL_F(min, 3);
SERIAL_PROTOCOLPGM(" Max: ");
SERIAL_PROTOCOL_F(max, 3);
SERIAL_PROTOCOLPGM(" Range: ");
SERIAL_PROTOCOL_F(max-min, 3);
SERIAL_EOL();
}
if (verbose_level > 0) { SERIAL_PROTOCOLPGM("Standard Deviation: ");
SERIAL_PROTOCOLPGM("Mean: "); SERIAL_PROTOCOL_F(sigma, 6);
SERIAL_PROTOCOL_F(mean, 6); SERIAL_EOL();
SERIAL_PROTOCOLPGM(" Min: ");
SERIAL_PROTOCOL_F(min, 3);
SERIAL_PROTOCOLPGM(" Max: ");
SERIAL_PROTOCOL_F(max, 3);
SERIAL_PROTOCOLPGM(" Range: ");
SERIAL_PROTOCOL_F(max-min, 3);
SERIAL_EOL(); SERIAL_EOL();
} }
SERIAL_PROTOCOLPGM("Standard Deviation: ");
SERIAL_PROTOCOL_F(sigma, 6);
SERIAL_EOL();
SERIAL_EOL();
clean_up_after_endstop_or_probe_move(); clean_up_after_endstop_or_probe_move();
// Re-enable bed level correction if it had been on // Re-enable bed level correction if it had been on
@ -11453,19 +11515,22 @@ void ok_to_send() {
// DELTA_PRINTABLE_RADIUS from center of bed, but delta // DELTA_PRINTABLE_RADIUS from center of bed, but delta
// now enforces is_position_reachable for X/Y regardless // now enforces is_position_reachable for X/Y regardless
// of HAS_SOFTWARE_ENDSTOPS, so that enforcement would be // of HAS_SOFTWARE_ENDSTOPS, so that enforcement would be
// redundant here. Probably should #ifdef out the X/Y // redundant here.
// axis clamps here for delta and just leave the Z clamp.
void clamp_to_software_endstops(float target[XYZ]) { void clamp_to_software_endstops(float target[XYZ]) {
if (!soft_endstops_enabled) return; if (!soft_endstops_enabled) return;
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]); #if DISABLED(DELTA)
NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]); NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]);
NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]);
#endif
NOLESS(target[Z_AXIS], soft_endstop_min[Z_AXIS]); NOLESS(target[Z_AXIS], soft_endstop_min[Z_AXIS]);
#endif #endif
#if ENABLED(MAX_SOFTWARE_ENDSTOPS) #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]); #if DISABLED(DELTA)
NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]); NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]);
NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]);
#endif
NOMORE(target[Z_AXIS], soft_endstop_max[Z_AXIS]); NOMORE(target[Z_AXIS], soft_endstop_max[Z_AXIS]);
#endif #endif
} }

10
Marlin/endstops.cpp
Unescape View File

@ -247,7 +247,7 @@ void Endstops::update() {
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX #define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
#define _ENDSTOP_HIT(AXIS) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MIN)) #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MINMAX))
// UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status // UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
#define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX))) #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
@ -257,7 +257,7 @@ void Endstops::update() {
#define UPDATE_ENDSTOP(AXIS,MINMAX) do { \ #define UPDATE_ENDSTOP(AXIS,MINMAX) do { \
UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \ UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \
if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \ if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \
_ENDSTOP_HIT(AXIS); \ _ENDSTOP_HIT(AXIS, MINMAX); \
stepper.endstop_triggered(_AXIS(AXIS)); \ stepper.endstop_triggered(_AXIS(AXIS)); \
} \ } \
} while(0) } while(0)
@ -267,9 +267,9 @@ void Endstops::update() {
if (G38_move) { if (G38_move) {
UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) { if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
if (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X); stepper.endstop_triggered(_AXIS(X)); } if (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X, MIN); stepper.endstop_triggered(_AXIS(X)); }
else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y); stepper.endstop_triggered(_AXIS(Y)); } else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y, MIN); stepper.endstop_triggered(_AXIS(Y)); }
else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z); stepper.endstop_triggered(_AXIS(Z)); } else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z, MIN); stepper.endstop_triggered(_AXIS(Z)); }
G38_endstop_hit = true; G38_endstop_hit = true;
} }
} }

17
Marlin/language_en.h
Unescape View File

@ -717,7 +717,7 @@
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
#endif #endif
#ifndef MSG_DELTA_SETTINGS #ifndef MSG_DELTA_SETTINGS
#define MSG_DELTA_SETTINGS _UxGT("Show Delta Settings") #define MSG_DELTA_SETTINGS _UxGT("Delta Settings")
#endif #endif
#ifndef MSG_DELTA_AUTO_CALIBRATE #ifndef MSG_DELTA_AUTO_CALIBRATE
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration")
@ -725,6 +725,15 @@
#ifndef MSG_DELTA_HEIGHT_CALIBRATE #ifndef MSG_DELTA_HEIGHT_CALIBRATE
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
#endif #endif
#ifndef MSG_DELTA_DIAG_ROG
#define MSG_DELTA_DIAG_ROG _UxGT("Diag Rod")
#endif
#ifndef MSG_DELTA_HEIGHT
#define MSG_DELTA_HEIGHT _UxGT("Height")
#endif
#ifndef MSG_DELTA_RADIUS
#define MSG_DELTA_RADIUS _UxGT("Radius")
#endif
#ifndef MSG_INFO_MENU #ifndef MSG_INFO_MENU
#define MSG_INFO_MENU _UxGT("About Printer") #define MSG_INFO_MENU _UxGT("About Printer")
#endif #endif
@ -840,6 +849,12 @@
#ifndef MSG_FILAMENT_CHANGE_NOZZLE #ifndef MSG_FILAMENT_CHANGE_NOZZLE
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
#endif #endif
#ifndef MSG_ERR_HOMING_FAILED
#define MSG_ERR_HOMING_FAILED _UxGT("Homing failed")
#endif
#ifndef MSG_ERR_PROBING_FAILED
#define MSG_ERR_PROBING_FAILED _UxGT("Probing failed")
#endif
// //
// Filament Change screens show up to 3 lines on a 4-line display // Filament Change screens show up to 3 lines on a 4-line display

18
Marlin/ultralcd.cpp
Unescape View File

@ -2537,15 +2537,23 @@ void kill_screen(const char* lcd_msg) {
void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); } void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); }
void _goto_center() { _man_probe_pt(0,0); } void _goto_center() { _man_probe_pt(0,0); }
void lcd_delta_G33_settings() { static float _delta_height = DELTA_HEIGHT;
void _lcd_set_delta_height() {
home_offset[Z_AXIS] = _delta_height - DELTA_HEIGHT;
update_software_endstops(Z_AXIS);
}
void lcd_delta_settings() {
START_MENU(); START_MENU();
MENU_BACK(MSG_DELTA_CALIBRATE); MENU_BACK(MSG_DELTA_CALIBRATE);
float delta_height = DELTA_HEIGHT + home_offset[Z_AXIS], Tz = 0.00; float Tz = 0.00;
MENU_ITEM_EDIT(float52, "Height", &delta_height, delta_height, delta_height); MENU_ITEM_EDIT(float52, MSG_DELTA_DIAG_ROG, &delta_diagonal_rod, DELTA_DIAGONAL_ROD - 5.0, DELTA_DIAGONAL_ROD + 5.0);
_delta_height = DELTA_HEIGHT + home_offset[Z_AXIS];
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &_delta_height, _delta_height - 10.0, _delta_height + 10.0, _lcd_set_delta_height);
MENU_ITEM_EDIT(float43, "Ex", &endstop_adj[A_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ex", &endstop_adj[A_AXIS], -5.0, 5.0);
MENU_ITEM_EDIT(float43, "Ey", &endstop_adj[B_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ey", &endstop_adj[B_AXIS], -5.0, 5.0);
MENU_ITEM_EDIT(float43, "Ez", &endstop_adj[C_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ez", &endstop_adj[C_AXIS], -5.0, 5.0);
MENU_ITEM_EDIT(float52, "Radius", &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0); MENU_ITEM_EDIT(float52, MSG_DELTA_RADIUS, &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0);
MENU_ITEM_EDIT(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0);
MENU_ITEM_EDIT(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0);
MENU_ITEM_EDIT(float43, "Tz", &Tz, -5.0, 5.0); MENU_ITEM_EDIT(float43, "Tz", &Tz, -5.0, 5.0);
@ -2556,7 +2564,7 @@ void kill_screen(const char* lcd_msg) {
START_MENU(); START_MENU();
MENU_BACK(MSG_MAIN); MENU_BACK(MSG_MAIN);
#if ENABLED(DELTA_AUTO_CALIBRATION) #if ENABLED(DELTA_AUTO_CALIBRATION)
MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_G33_settings); MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings);
MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33")); MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1")); MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1"));
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)

Write Preview
Loading…
Cancel
Save