Merge pull request #5487 from thinkyhead/rc_easier_move_axis

Rearrange Move Menu, Fix up Delta Calibration

Marlin/Marlin.h

@@ -322,7 +322,8 @@ float code_value_temp_diff();
                delta_segments_per_second,
                delta_diagonal_rod_trim_tower_1,
                delta_diagonal_rod_trim_tower_2,
-               delta_diagonal_rod_trim_tower_3;
+               delta_diagonal_rod_trim_tower_3,
+               delta_clip_start_height;
   void recalc_delta_settings(float radius, float diagonal_rod);
 #elif IS_SCARA
   void forward_kinematics_SCARA(const float &a, const float &b);

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -453,10 +453,7 @@
   #define DELTA_PRINTABLE_RADIUS 160.0
 
   // Delta calibration menu
-  // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  // If needed, adjust the X, Y, Z calibration coordinates
-  // in ultralcd.cpp@lcd_delta_calibrate_menu()
   //#define DELTA_CALIBRATION_MENU
 
   // After homing move down to a height where XY movement is unconstrained

Marlin/example_configurations/delta/generic/Configuration.h

@@ -453,10 +453,7 @@
   #define DELTA_PRINTABLE_RADIUS 140.0
 
   // Delta calibration menu
-  // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  // If needed, adjust the X, Y, Z calibration coordinates
-  // in ultralcd.cpp@lcd_delta_calibrate_menu()
   //#define DELTA_CALIBRATION_MENU
 
   // After homing move down to a height where XY movement is unconstrained

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -453,10 +453,7 @@
   #define DELTA_PRINTABLE_RADIUS 90.0
 
   // Delta calibration menu
-  // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  // If needed, adjust the X, Y, Z calibration coordinates
-  // in ultralcd.cpp@lcd_delta_calibrate_menu()
   //#define DELTA_CALIBRATION_MENU
 
   // After homing move down to a height where XY movement is unconstrained

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -440,10 +440,7 @@
   #define DELTA_PRINTABLE_RADIUS 127.0
 
   // Delta calibration menu
-  // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  // If needed, adjust the X, Y, Z calibration coordinates
-  // in ultralcd.cpp@lcd_delta_calibrate_menu()
   //#define DELTA_CALIBRATION_MENU
 
   // After homing move down to a height where XY movement is unconstrained

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -451,10 +451,7 @@
   #define DELTA_PRINTABLE_RADIUS 140.0
 
   // Delta calibration menu
-  // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  // If needed, adjust the X, Y, Z calibration coordinates
-  // in ultralcd.cpp@lcd_delta_calibrate_menu()
   //#define DELTA_CALIBRATION_MENU
 
   // After homing move down to a height where XY movement is unconstrained

Marlin/language_en.h

@@ -138,6 +138,12 @@
 #ifndef MSG_LEVEL_BED
   #define MSG_LEVEL_BED                       "Level bed"
 #endif
+#ifndef MSG_MOVING
+  #define MSG_MOVING                          "Moving..."
+#endif
+#ifndef MSG_FREE_XY
+  #define MSG_FREE_XY                         "Free XY"
+#endif
 #ifndef MSG_MOVE_X
   #define MSG_MOVE_X                          "Move X"
 #endif

Marlin/ultralcd.cpp

@@ -390,7 +390,7 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
   bool screen_changed;
 
   // LCD and menu clicks
-  bool lcd_clicked, wait_for_unclick, defer_return_to_status;
+  bool lcd_clicked, wait_for_unclick, defer_return_to_status, no_reentrance;
 
   // Variables used when editing values.
   const char* editLabel;
@@ -422,6 +422,27 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
     }
   }
 
+  /**
+   * Synchronize safely while holding the current screen
+   * This blocks all further screen or stripe updates once called
+   */
+  inline void lcd_synchronize() {
+    lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_MOVING));
+    if (no_reentrance) return;
+    no_reentrance = true;
+    screenFunc_t old_screen = currentScreen;
+    lcd_goto_screen(lcd_synchronize);
+    stepper.synchronize();
+    no_reentrance = false;
+    lcd_goto_screen(old_screen);
+  }
+
+  inline void lcd_wait_for_homing() {
+    no_reentrance = true;
+    while (!axis_homed[X_AXIS] || !axis_homed[Y_AXIS] || !axis_homed[Z_AXIS]) idle();
+    no_reentrance = true;
+  }
+
   void lcd_return_to_status() { lcd_goto_screen(lcd_status_screen); }
 
   void lcd_save_previous_screen() {
@@ -1063,6 +1084,7 @@ void kill_screen(const char* lcd_msg) {
     // Note: During Manual Bed Leveling the homed Z position is MESH_HOME_SEARCH_Z
     // Z position will be restored with the final action, a G28
     inline void _mbl_goto_xy(float x, float y) {
+      if (no_reentrance) return;
       current_position[Z_AXIS] = LOGICAL_Z_POSITION(MESH_HOME_SEARCH_Z + Z_HOMING_HEIGHT);
       line_to_current(Z_AXIS);
       current_position[X_AXIS] = LOGICAL_X_POSITION(x);
@@ -1072,7 +1094,7 @@ void kill_screen(const char* lcd_msg) {
         current_position[Z_AXIS] = LOGICAL_Z_POSITION(MESH_HOME_SEARCH_Z);
         line_to_current(Z_AXIS);
       #endif
-      stepper.synchronize();
+      lcd_synchronize();
     }
 
     void _lcd_level_goto_next_point();
@@ -1094,6 +1116,8 @@ void kill_screen(const char* lcd_msg) {
     void _lcd_level_bed_get_z() {
       ENCODER_DIRECTION_NORMAL();
 
+      if (no_reentrance) goto KeepDrawing;
+
       // Encoder wheel adjusts the Z position
       if (encoderPosition) {
         refresh_cmd_timeout();
@@ -1121,7 +1145,7 @@ void kill_screen(const char* lcd_msg) {
 
             current_position[Z_AXIS] = MESH_HOME_SEARCH_Z + Z_HOMING_HEIGHT;
             line_to_current(Z_AXIS);
-            stepper.synchronize();
+            lcd_synchronize();
 
             mbl.set_has_mesh(true);
             enqueue_and_echo_commands_P(PSTR("G28"));
@@ -1141,6 +1165,7 @@ void kill_screen(const char* lcd_msg) {
         debounce_click = false;
       }
 
+KeepDrawing:
       // Update on first display, then only on updates to Z position
       // Show message above on clicks instead
       if (lcdDrawUpdate) {
@@ -1215,7 +1240,8 @@ void kill_screen(const char* lcd_msg) {
           LCDVIEW_CALL_NO_REDRAW
         #endif
       ;
-      if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
+      if (no_reentrance) return;
+      lcd_wait_for_homing();
       lcd_goto_screen(_lcd_level_bed_homing_done);
     }
 
@@ -1256,6 +1282,14 @@ void kill_screen(const char* lcd_msg) {
     //
     MENU_BACK(MSG_MAIN);
 
+    //
+    // Move Axis
+    //
+    #if ENABLED(DELTA)
+      if (axis_homed[Z_AXIS])
+    #endif
+        MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
+
     //
     // Auto Home
     //
@@ -1283,11 +1317,6 @@ void kill_screen(const char* lcd_msg) {
       MENU_ITEM(submenu, MSG_LEVEL_BED, lcd_level_bed);
     #endif
 
-    //
-    // Move Axis
-    //
-    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
-
     //
     // Disable Steppers
     //
@@ -1341,14 +1370,50 @@ void kill_screen(const char* lcd_msg) {
     END_MENU();
   }
 
+  float move_menu_scale;
+
   #if ENABLED(DELTA_CALIBRATION_MENU)
 
+    void lcd_move_z();
+    void lcd_delta_calibrate_menu();
+
+    void _lcd_calibrate_homing() {
+      if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_LEVEL_BED_HOMING));
+      lcdDrawUpdate =
+        #if ENABLED(DOGLCD)
+          LCDVIEW_CALL_REDRAW_NEXT
+        #else
+          LCDVIEW_CALL_NO_REDRAW
+        #endif
+      ;
+      if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
+        lcd_goto_previous_menu();
+    }
+
+    void _lcd_delta_calibrate_home() {
+      enqueue_and_echo_commands_P(PSTR("G28"));
+      lcd_goto_screen(_lcd_calibrate_homing);
+    }
+
+    // Move directly to the tower position with uninterpolated moves
+    // If we used interpolated moves it would cause this to become re-entrant
     void _goto_tower_pos(const float &a) {
-      do_blocking_move_to(
+      if (no_reentrance) return;
-        a < 0 ? X_HOME_POS : sin(a) * -(DELTA_PRINTABLE_RADIUS),
+
-        a < 0 ? Y_HOME_POS : cos(a) *  (DELTA_PRINTABLE_RADIUS),
+      current_position[Z_AXIS] = max(Z_HOMING_HEIGHT, Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5;
-        4
+      line_to_current(Z_AXIS);
-      );
+
+      current_position[X_AXIS] = a < 0 ? X_HOME_POS : sin(a) * -(DELTA_PRINTABLE_RADIUS);
+      current_position[Y_AXIS] = a < 0 ? Y_HOME_POS : cos(a) *  (DELTA_PRINTABLE_RADIUS);
+      line_to_current(Z_AXIS);
+
+      current_position[Z_AXIS] = 4.0;
+      line_to_current(Z_AXIS);
+
+      lcd_synchronize();
+
+      move_menu_scale = 0.1;
+      lcd_goto_screen(lcd_move_z);
     }
 
     void _goto_tower_x() { _goto_tower_pos(RADIANS(120)); }
@@ -1359,18 +1424,18 @@ void kill_screen(const char* lcd_msg) {
     void lcd_delta_calibrate_menu() {
       START_MENU();
       MENU_BACK(MSG_MAIN);
-      MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
+      MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home);
-      MENU_ITEM(function, MSG_DELTA_CALIBRATE_X, _goto_tower_x);
+      if (axis_homed[Z_AXIS]) {
-      MENU_ITEM(function, MSG_DELTA_CALIBRATE_Y, _goto_tower_y);
+        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x);
-      MENU_ITEM(function, MSG_DELTA_CALIBRATE_Z, _goto_tower_z);
+        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Y, _goto_tower_y);
-      MENU_ITEM(function, MSG_DELTA_CALIBRATE_CENTER, _goto_center);
+        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Z, _goto_tower_z);
+        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_CENTER, _goto_center);
+      }
       END_MENU();
     }
 
   #endif // DELTA_CALIBRATION_MENU
 
-  float move_menu_scale;
-
   /**
    * If the most recent manual move hasn't been fed to the planner yet,
    * and the planner can accept one, send immediately
@@ -1495,23 +1560,92 @@ void kill_screen(const char* lcd_msg) {
    *
    */
 
+  screenFunc_t _manual_move_func_ptr;
+
+  void lcd_move_menu_10mm() { move_menu_scale = 10.0; lcd_goto_screen(_manual_move_func_ptr); }
+  void lcd_move_menu_1mm()  { move_menu_scale =  1.0; lcd_goto_screen(_manual_move_func_ptr); }
+  void lcd_move_menu_01mm() { move_menu_scale =  0.1; lcd_goto_screen(_manual_move_func_ptr); }
+
+  void _lcd_move_distance_menu(AxisEnum axis, screenFunc_t func) {
+    _manual_move_func_ptr = func;
+    START_MENU();
+    if (LCD_HEIGHT >= 4) {
+      switch(axis) {
+        case X_AXIS:
+          STATIC_ITEM(MSG_MOVE_X, true, true); break;
+        case Y_AXIS:
+          STATIC_ITEM(MSG_MOVE_Y, true, true); break;
+        case Z_AXIS:
+          STATIC_ITEM(MSG_MOVE_Z, true, true); break;
+        default:
+          STATIC_ITEM(MSG_MOVE_E, true, true); break;
+      }
+    }
+    MENU_BACK(MSG_MOVE_AXIS);
+    if (axis == X_AXIS || axis == Y_AXIS)
+      MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
+    MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
+    MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
+    END_MENU();
+  }
+  void lcd_move_get_x_amount()        { _lcd_move_distance_menu(X_AXIS, lcd_move_x); }
+  void lcd_move_get_y_amount()        { _lcd_move_distance_menu(Y_AXIS, lcd_move_y); }
+  void lcd_move_get_z_amount()        { _lcd_move_distance_menu(Z_AXIS, lcd_move_z); }
+  void lcd_move_get_e_amount()        { _lcd_move_distance_menu(E_AXIS, lcd_move_e); }
+  #if E_MANUAL > 1
+    void lcd_move_get_e0_amount()     { _lcd_move_distance_menu(E_AXIS, lcd_move_e0); }
+    void lcd_move_get_e1_amount()     { _lcd_move_distance_menu(E_AXIS, lcd_move_e1); }
+    #if E_MANUAL > 2
+      void lcd_move_get_e2_amount()   { _lcd_move_distance_menu(E_AXIS, lcd_move_e2); }
+      #if E_MANUAL > 3
+        void lcd_move_get_e3_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e3); }
+      #endif
+    #endif
+  #endif
+
+  /**
+   *
+   * "Prepare" > "Move Axis" submenu
+   *
+   */
+
   #if IS_KINEMATIC
     #define _MOVE_XYZ_ALLOWED (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
+    #if ENABLED(DELTA)
+      #define _MOVE_XY_ALLOWED (current_position[Z_AXIS] <= delta_clip_start_height)
+      void lcd_lower_z_to_clip_height() {
+        if (!no_reentrance) {
+          current_position[Z_AXIS] = delta_clip_start_height;
+          line_to_current(Z_AXIS);
+          lcd_synchronize();
+        }
+      }
+    #else
+      #define _MOVE_XY_ALLOWED true
+    #endif
   #else
     #define _MOVE_XYZ_ALLOWED true
+    #define _MOVE_XY_ALLOWED true
   #endif
 
-  void _lcd_move_menu_axis() {
+  void lcd_move_menu() {
     START_MENU();
-    MENU_BACK(MSG_MOVE_AXIS);
+    MENU_BACK(MSG_PREPARE);
 
     if (_MOVE_XYZ_ALLOWED) {
-      MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
+      if (_MOVE_XY_ALLOWED) {
-      MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
+        MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_get_x_amount);
+        MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_get_y_amount);
       }
+      #if ENABLED(DELTA)
+        else
+          MENU_ITEM(function, MSG_FREE_XY, lcd_lower_z_to_clip_height);
+      #endif
 
-    if (move_menu_scale < 10.0) {
+      MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_get_z_amount);
-      if (_MOVE_XYZ_ALLOWED) MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
+    }
+    else
+      MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
 
     #if ENABLED(SWITCHING_EXTRUDER)
       if (active_extruder)
@@ -1520,50 +1654,18 @@ void kill_screen(const char* lcd_msg) {
         MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1"));
     #endif
 
-      MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
+    MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount);
     #if E_MANUAL > 1
-        MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_e0);
+      MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_get_e0_amount);
-        MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_e1);
+      MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_get_e1_amount);
       #if E_MANUAL > 2
-          MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_e2);
+        MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount);
         #if E_MANUAL > 3
-            MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_e3);
+          MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount);
         #endif
       #endif
     #endif
-    }
-    END_MENU();
-  }
-
-  void lcd_move_menu_10mm() {
-    move_menu_scale = 10.0;
-    _lcd_move_menu_axis();
-  }
-  void lcd_move_menu_1mm() {
-    move_menu_scale = 1.0;
-    _lcd_move_menu_axis();
-  }
-  void lcd_move_menu_01mm() {
-    move_menu_scale = 0.1;
-    _lcd_move_menu_axis();
-  }
-
-  /**
-   *
-   * "Prepare" > "Move Axis" submenu
-   *
-   */
-
-  void lcd_move_menu() {
-    START_MENU();
-    MENU_BACK(MSG_PREPARE);
-
-    if (_MOVE_XYZ_ALLOWED)
-      MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
 
-    MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
-    MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
-    //TODO:X,Y,Z,E
     END_MENU();
   }
 
@@ -2502,6 +2604,39 @@ void kill_screen(const char* lcd_msg) {
     void reprapworld_keypad_move_y_down()  { _reprapworld_keypad_move(Y_AXIS,  1); }
     void reprapworld_keypad_move_home()    { enqueue_and_echo_commands_P(PSTR("G28")); } // move all axes home and wait
     void reprapworld_keypad_move_menu()    { lcd_goto_screen(lcd_move_menu); }
+
+    inline void handle_reprapworld_keypad() {
+
+      static uint8_t keypad_debounce = 0;
+
+      if (!REPRAPWORLD_KEYPAD_PRESSED) {
+        if (keypad_debounce > 0) keypad_debounce--;
+      }
+      else if (!keypad_debounce) {
+        keypad_debounce = 2;
+
+        if (REPRAPWORLD_KEYPAD_MOVE_MENU)       reprapworld_keypad_move_menu();
+
+        #if DISABLED(DELTA) && Z_HOME_DIR == -1
+          if (REPRAPWORLD_KEYPAD_MOVE_Z_UP)     reprapworld_keypad_move_z_up();
+        #endif
+
+        if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
+          #if ENABLED(DELTA) || Z_HOME_DIR != -1
+            if (REPRAPWORLD_KEYPAD_MOVE_Z_UP)   reprapworld_keypad_move_z_up();
+          #endif
+          if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN)   reprapworld_keypad_move_z_down();
+          if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT)   reprapworld_keypad_move_x_left();
+          if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT)  reprapworld_keypad_move_x_right();
+          if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN)   reprapworld_keypad_move_y_down();
+          if (REPRAPWORLD_KEYPAD_MOVE_Y_UP)     reprapworld_keypad_move_y_up();
+        }
+        else {
+          if (REPRAPWORLD_KEYPAD_MOVE_HOME)     reprapworld_keypad_move_home();
+        }
+      }
+    }
+
   #endif // REPRAPWORLD_KEYPAD
 
   /**
@@ -2773,36 +2908,8 @@ void lcd_update() {
       #endif
 
       #if ENABLED(REPRAPWORLD_KEYPAD)
-
+        handle_reprapworld_keypad();
-        static uint8_t keypad_debounce = 0;
-
-        if (!REPRAPWORLD_KEYPAD_PRESSED) {
-          if (keypad_debounce > 0) keypad_debounce--;
-        }
-        else if (!keypad_debounce) {
-          keypad_debounce = 2;
-
-          if (REPRAPWORLD_KEYPAD_MOVE_MENU)       reprapworld_keypad_move_menu();
-
-          #if DISABLED(DELTA) && Z_HOME_DIR == -1
-            if (REPRAPWORLD_KEYPAD_MOVE_Z_UP)     reprapworld_keypad_move_z_up();
-          #endif
-
-          if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
-            #if ENABLED(DELTA) || Z_HOME_DIR != -1
-              if (REPRAPWORLD_KEYPAD_MOVE_Z_UP)   reprapworld_keypad_move_z_up();
       #endif
-            if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN)   reprapworld_keypad_move_z_down();
-            if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT)   reprapworld_keypad_move_x_left();
-            if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT)  reprapworld_keypad_move_x_right();
-            if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN)   reprapworld_keypad_move_y_down();
-            if (REPRAPWORLD_KEYPAD_MOVE_Y_UP)     reprapworld_keypad_move_y_up();
-          }
-          else {
-            if (REPRAPWORLD_KEYPAD_MOVE_HOME)     reprapworld_keypad_move_home();
-          }
-        }
-      #endif // REPRAPWORLD_KEYPAD
 
       bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP);
       if (encoderPastThreshold || lcd_clicked) {

Marlin/ultralcd_impl_DOGM.h

@@ -656,8 +656,6 @@ static void lcd_implementation_status_screen() {
     u8g.setPrintPos((START_COL) * (DOG_CHAR_WIDTH), row_y2);
   }
 
-  #if ENABLED(LCD_INFO_MENU) || ENABLED(FILAMENT_CHANGE_FEATURE)
-
   // Draw a static line of text in the same idiom as a menu item
   static void lcd_implementation_drawmenu_static(const uint8_t row, const char* pstr, const bool center=true, const bool invert=false, const char* valstr=NULL) {
 
@@ -683,8 +681,6 @@ static void lcd_implementation_status_screen() {
     while (n-- > 0) u8g.print(' ');
   }
 
-  #endif // LCD_INFO_MENU || FILAMENT_CHANGE_FEATURE
-
   // Draw a generic menu item
   static void lcd_implementation_drawmenu_generic(const bool isSelected, const uint8_t row, const char* pstr, const char pre_char, const char post_char) {
     UNUSED(pre_char);

Marlin/ultralcd_impl_HD44780.h

@@ -792,8 +792,6 @@ static void lcd_implementation_status_screen() {
 
 #if ENABLED(ULTIPANEL)
 
-  #if ENABLED(LCD_INFO_MENU) || ENABLED(FILAMENT_CHANGE_FEATURE)
-
   static void lcd_implementation_drawmenu_static(const uint8_t row, const char* pstr, const bool center=true, const bool invert=false, const char *valstr=NULL) {
     UNUSED(invert);
     char c;
@@ -814,8 +812,6 @@ static void lcd_implementation_status_screen() {
     while (n-- > 0) lcd.print(' ');
   }
 
-  #endif // LCD_INFO_MENU || FILAMENT_CHANGE_FEATURE
-
   static void lcd_implementation_drawmenu_generic(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char post_char) {
     char c;
     uint8_t n = LCD_WIDTH - 2;