forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #3086 from thinkyhead/rc_two_fans

Browse Source 
Support for multiple PWM fans
master
Scott Lahteine 9 years ago
parent 4634feaeab 38b0082bf2
commit 09ef955191
11 changed files with 326 additions and 89 deletions
Show Stats Download Patch File Download Diff File

28
Marlin/Conditionals.h
Unescape View File

@ -465,7 +465,9 @@
#define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN)) #define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
#define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN)) #define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN))
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3) #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define HAS_FAN (PIN_EXISTS(FAN)) #define HAS_FAN0 (PIN_EXISTS(FAN))
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN1_PIN)
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN2_PIN)
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN)) #define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0) #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0)) #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
@ -550,9 +552,31 @@
#if HAS_HEATER_BED #if HAS_HEATER_BED
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v) #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v)
#endif #endif
#if HAS_FAN
/**
* Up to 3 PWM fans
*/
#if HAS_FAN2
#define FAN_COUNT 3
#elif HAS_FAN1
#define FAN_COUNT 2
#elif HAS_FAN0
#define FAN_COUNT 1
#else
#define FAN_COUNT 0
#endif
#if HAS_FAN0
#define WRITE_FAN(v) WRITE(FAN_PIN, v) #define WRITE_FAN(v) WRITE(FAN_PIN, v)
#define WRITE_FAN0(v) WRITE_FAN(v)
#endif
#if HAS_FAN1
#define WRITE_FAN1(v) WRITE(FAN1_PIN, v)
#endif
#if HAS_FAN2
#define WRITE_FAN2(v) WRITE(FAN2_PIN, v)
#endif #endif
#define WRITE_FAN_N(n, v) WRITE_FAN##n(v)
#define HAS_BUZZER (PIN_EXISTS(BEEPER) || defined(LCD_USE_I2C_BUZZER)) #define HAS_BUZZER (PIN_EXISTS(BEEPER) || defined(LCD_USE_I2C_BUZZER))

8
Marlin/Marlin.h
Unescape View File

@ -306,17 +306,15 @@ extern bool axis_homed[3]; // axis[n].is_homed
extern float extrude_min_temp; extern float extrude_min_temp;
#endif #endif
extern int fanSpeed; #if FAN_COUNT > 0
extern int fanSpeeds[FAN_COUNT];
#endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
extern int ValvePressure; extern int ValvePressure;
extern int EtoPPressure; extern int EtoPPressure;
#endif #endif
#if ENABLED(FAN_SOFT_PWM)
extern unsigned char fanSpeedSoftPwm;
#endif
#if ENABLED(FILAMENT_SENSOR) #if ENABLED(FILAMENT_SENSOR)
extern float filament_width_nominal; //holds the theoretical filament diameter i.e., 3.00 or 1.75 extern float filament_width_nominal; //holds the theoretical filament diameter i.e., 3.00 or 1.75
extern bool filament_sensor; //indicates that filament sensor readings should control extrusion extern bool filament_sensor; //indicates that filament sensor readings should control extrusion

80
Marlin/Marlin_main.cpp
Unescape View File

@ -267,8 +267,11 @@ float home_offset[3] = { 0 };
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
#if FAN_COUNT > 0
int fanSpeeds[FAN_COUNT] = { 0 };
#endif
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
int fanSpeed = 0;
bool cancel_heatup = false; bool cancel_heatup = false;
const char errormagic[] PROGMEM = "Error:"; const char errormagic[] PROGMEM = "Error:";
@ -3581,31 +3584,39 @@ inline void gcode_M31() {
/** /**
* M42: Change pin status via GCode * M42: Change pin status via GCode
*
* P<pin> Pin number (LED if omitted)
* S<byte> Pin status from 0 - 255
*/ */
inline void gcode_M42() { inline void gcode_M42() {
if (code_seen('S')) { if (code_seen('S')) {
int pin_status = code_value_short(), int pin_status = code_value_short();
pin_number = LED_PIN; if (pin_status < 0 || pin_status > 255) return;
if (code_seen('P') && pin_status >= 0 && pin_status <= 255) int pin_number = code_seen('P') ? code_value_short() : LED_PIN;
pin_number = code_value_short(); if (pin_number < 0) return;
for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) { for (uint8_t i = 0; i < COUNT(sensitive_pins); i++)
if (sensitive_pins[i] == pin_number) { if (pin_number == sensitive_pins[i]) return;
pin_number = -1;
break; pinMode(pin_number, OUTPUT);
} digitalWrite(pin_number, pin_status);
} analogWrite(pin_number, pin_status);
#if HAS_FAN #if FAN_COUNT > 0
if (pin_number == FAN_PIN) fanSpeed = pin_status; switch (pin_number) {
#if HAS_FAN0
case FAN_PIN: fanSpeeds[0] = pin_status; break;
#endif
#if HAS_FAN1
case FAN1_PIN: fanSpeeds[1] = pin_status; break;
#endif
#if HAS_FAN2
case FAN2_PIN: fanSpeeds[2] = pin_status; break;
#endif
}
#endif #endif
if (pin_number > -1) {
pinMode(pin_number, OUTPUT);
digitalWrite(pin_number, pin_status);
analogWrite(pin_number, pin_status);
}
} // code_seen('S') } // code_seen('S')
} }
@ -3968,19 +3979,30 @@ inline void gcode_M105() {
SERIAL_EOL; SERIAL_EOL;
} }
#if HAS_FAN #if FAN_COUNT > 0
/** /**
* M106: Set Fan Speed * M106: Set Fan Speed
*
* S<int> Speed between 0-255
* P<index> Fan index, if more than one fan
*/ */
inline void gcode_M106() { fanSpeed = code_seen('S') ? constrain(code_value_short(), 0, 255) : 255; } inline void gcode_M106() {
uint16_t s = code_seen('S') ? code_value_short() : 255,
p = code_seen('P') ? code_value_short() : 0;
NOMORE(s, 255);
if (p < FAN_COUNT) fanSpeeds[p] = s;
}
/** /**
* M107: Fan Off * M107: Fan Off
*/ */
inline void gcode_M107() { fanSpeed = 0; } inline void gcode_M107() {
uint16_t p = code_seen('P') ? code_value_short() : 0;
if (p < FAN_COUNT) fanSpeeds[p] = 0;
}
#endif // HAS_FAN #endif // FAN_COUNT > 0
/** /**
* M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating. * M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating.
@ -4047,7 +4069,7 @@ inline void gcode_M109() {
} }
#else #else
SERIAL_EOL; SERIAL_EOL;
#endif //TEMP_RESIDENCY_TIME #endif
} }
idle(); idle();
@ -4261,7 +4283,13 @@ inline void gcode_M140() {
inline void gcode_M81() { inline void gcode_M81() {
disable_all_heaters(); disable_all_heaters();
finishAndDisableSteppers(); finishAndDisableSteppers();
fanSpeed = 0; #if FAN_COUNT > 0
#if FAN_COUNT > 1
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
#else
fanSpeeds[0] = 0;
#endif
#endif
delay(1000); // Wait 1 second before switching off delay(1000); // Wait 1 second before switching off
#if HAS_SUICIDE #if HAS_SUICIDE
st_synchronize(); st_synchronize();
@ -6015,14 +6043,14 @@ void process_next_command() {
break; break;
#endif // HAS_TEMP_BED #endif // HAS_TEMP_BED
#if HAS_FAN #if FAN_COUNT > 0
case 106: // M106: Fan On case 106: // M106: Fan On
gcode_M106(); gcode_M106();
break; break;
case 107: // M107: Fan Off case 107: // M107: Fan Off
gcode_M107(); gcode_M107();
break; break;
#endif // HAS_FAN #endif // FAN_COUNT > 0
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
// PWM for HEATER_1_PIN // PWM for HEATER_1_PIN

34
Marlin/SanityCheck.h
Unescape View File

@ -264,22 +264,36 @@
/** /**
* Make sure auto fan pins don't conflict with the fan pin * Make sure auto fan pins don't conflict with the fan pin
*/ */
#if HAS_AUTO_FAN && HAS_FAN #if HAS_AUTO_FAN
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN #if HAS_FAN0
#error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN. #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN #error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN.
#error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN. #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN #error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN.
#error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN. #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN #error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN.
#error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN. #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN
#error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN.
#endif
#endif #endif
#endif #endif
#if HAS_FAN && CONTROLLERFAN_PIN == FAN_PIN #if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN
#error You cannot set CONTROLLERFAN_PIN equal to FAN_PIN. #error You cannot set CONTROLLERFAN_PIN equal to FAN_PIN.
#endif #endif
#if HAS_CONTROLLERFAN
#if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
#elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
#elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
#elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
#endif
#endif
/** /**
* Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set. * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
*/ */

6
Marlin/dogm_lcd_implementation.h
Unescape View File

@ -283,7 +283,7 @@ static void lcd_implementation_status_screen() {
u8g.setColorIndex(1); // black on white u8g.setColorIndex(1); // black on white
// Symbols menu graphics, animated fan // Symbols menu graphics, animated fan
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp); u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp);
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// SD Card Symbol // SD Card Symbol
@ -324,8 +324,8 @@ static void lcd_implementation_status_screen() {
// Fan // Fan
lcd_setFont(FONT_STATUSMENU); lcd_setFont(FONT_STATUSMENU);
u8g.setPrintPos(104, 27); u8g.setPrintPos(104, 27);
#if HAS_FAN #if HAS_FAN0
int per = ((fanSpeed + 1) * 100) / 256; int per = ((fanSpeeds[0] + 1) * 100) / 256;
if (per) { if (per) {
lcd_print(itostr3(per)); lcd_print(itostr3(per));
lcd_print('%'); lcd_print('%');

2
Marlin/pins_MEGACONTROLLER.h
Unescape View File

@ -49,7 +49,7 @@
#define FAN1_PIN 35 #define FAN1_PIN 35
#define FAN2_PIN 36 #define FAN2_PIN 36
#define FAN_SOFT_PWM #define FAN_SOFT_PWM
#define CONTROLLERFAN_PIN 36 #define CONTROLLERFAN_PIN FAN2_PIN
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#define KILL_PIN -1 #define KILL_PIN -1

99
Marlin/planner.cpp
Unescape View File

@ -93,6 +93,10 @@ unsigned long axis_steps_per_sqr_second[NUM_AXIS];
bool autotemp_enabled = false; bool autotemp_enabled = false;
#endif #endif
#if ENABLED(FAN_SOFT_PWM)
extern unsigned char fanSpeedSoftPwm[FAN_COUNT];
#endif
//=========================================================================== //===========================================================================
//============ semi-private variables, used in inline functions ============= //============ semi-private variables, used in inline functions =============
//=========================================================================== //===========================================================================
@ -399,7 +403,12 @@ void plan_init() {
void check_axes_activity() { void check_axes_activity() {
unsigned char axis_active[NUM_AXIS] = { 0 }, unsigned char axis_active[NUM_AXIS] = { 0 },
tail_fan_speed = fanSpeed; tail_fan_speed[FAN_COUNT];
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = fanSpeeds[i];
#endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
unsigned char tail_valve_pressure = ValvePressure, unsigned char tail_valve_pressure = ValvePressure,
tail_e_to_p_pressure = EtoPPressure; tail_e_to_p_pressure = EtoPPressure;
@ -408,13 +417,19 @@ void check_axes_activity() {
block_t* block; block_t* block;
if (blocks_queued()) { if (blocks_queued()) {
uint8_t block_index = block_buffer_tail; uint8_t block_index = block_buffer_tail;
tail_fan_speed = block_buffer[block_index].fan_speed;
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = block_buffer[block_index].fan_speed[i];
#endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
block = &block_buffer[block_index]; block = &block_buffer[block_index];
tail_valve_pressure = block->valve_pressure; tail_valve_pressure = block->valve_pressure;
tail_e_to_p_pressure = block->e_to_p_pressure; tail_e_to_p_pressure = block->e_to_p_pressure;
#endif #endif
while (block_index != block_buffer_head) { while (block_index != block_buffer_head) {
block = &block_buffer[block_index]; block = &block_buffer[block_index];
for (int i = 0; i < NUM_AXIS; i++) if (block->steps[i]) axis_active[i]++; for (int i = 0; i < NUM_AXIS; i++) if (block->steps[i]) axis_active[i]++;
@ -439,32 +454,65 @@ void check_axes_activity() {
} }
#endif #endif
#if HAS_FAN #if FAN_COUNT > 0
#if defined(FAN_MIN_PWM)
#define CALC_FAN_SPEED(f) (tail_fan_speed[f] ? ( FAN_MIN_PWM + (tail_fan_speed[f] * (255 - FAN_MIN_PWM)) / 255 ) : 0)
#else
#define CALC_FAN_SPEED(f) tail_fan_speed[f]
#endif
#ifdef FAN_KICKSTART_TIME #ifdef FAN_KICKSTART_TIME
static millis_t fan_kick_end = 0;
if (tail_fan_speed) { static millis_t fan_kick_end[FAN_COUNT] = { 0 }, ms = millis();
millis_t ms = millis();
if (fan_kick_end == 0) { #define KICKSTART_FAN(f) \
fan_kick_end = ms + FAN_KICKSTART_TIME; if (tail_fan_speed[f]) { \
tail_fan_speed = 255; // Starting up. if (fan_kick_end[f] == 0) { \
fan_kick_end[f] = ms + FAN_KICKSTART_TIME; \
tail_fan_speed[f] = 255; \
} \
else if (fan_kick_end[f] > ms) \
tail_fan_speed[f] = 255; \
else \
fan_kick_end[f] = 0; \
} }
else if (ms < fan_kick_end)
tail_fan_speed = 255; // Still spinning up. #if HAS_FAN0
else KICKSTART_FAN(0);
fan_kick_end = 0; #endif
} #if HAS_FAN1
KICKSTART_FAN(1);
#endif
#if HAS_FAN2
KICKSTART_FAN(2);
#endif
#endif //FAN_KICKSTART_TIME #endif //FAN_KICKSTART_TIME
#if defined(FAN_MIN_PWM)
#define CALC_FAN_SPEED (tail_fan_speed ? ( FAN_MIN_PWM + (tail_fan_speed * (255 - (FAN_MIN_PWM))) / 255 ) : 0)
#else
#define CALC_FAN_SPEED tail_fan_speed
#endif // FAN_MIN_PWM
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
fanSpeedSoftPwm = CALC_FAN_SPEED; #if HAS_FAN0
fanSpeedSoftPwm[0] = CALC_FAN_SPEED(0);
#endif
#if HAS_FAN1
fanSpeedSoftPwm[1] = CALC_FAN_SPEED(1);
#endif
#if HAS_FAN2
fanSpeedSoftPwm[2] = CALC_FAN_SPEED(2);
#endif
#else #else
analogWrite(FAN_PIN, CALC_FAN_SPEED); #if HAS_FAN0
#endif // FAN_SOFT_PWM analogWrite(FAN_PIN, CALC_FAN_SPEED(0));
#endif // HAS_FAN #endif
#if HAS_FAN1
analogWrite(FAN1_PIN, CALC_FAN_SPEED(1));
#endif
#if HAS_FAN2
analogWrite(FAN2_PIN, CALC_FAN_SPEED(2));
#endif
#endif
#endif // FAN_COUNT > 0
#if ENABLED(AUTOTEMP) #if ENABLED(AUTOTEMP)
getHighESpeed(); getHighESpeed();
@ -576,7 +624,10 @@ float junction_deviation = 0.1;
// Bail if this is a zero-length block // Bail if this is a zero-length block
if (block->step_event_count <= dropsegments) return; if (block->step_event_count <= dropsegments) return;
block->fan_speed = fanSpeed; #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) block->fan_speed[i] = fanSpeeds[i];
#endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
block->valve_pressure = ValvePressure; block->valve_pressure = ValvePressure;
block->e_to_p_pressure = EtoPPressure; block->e_to_p_pressure = EtoPPressure;

8
Marlin/planner.h
Unescape View File

@ -59,12 +59,18 @@ typedef struct {
unsigned long initial_rate; // The jerk-adjusted step rate at start of block unsigned long initial_rate; // The jerk-adjusted step rate at start of block
unsigned long final_rate; // The minimal rate at exit unsigned long final_rate; // The minimal rate at exit
unsigned long acceleration_st; // acceleration steps/sec^2 unsigned long acceleration_st; // acceleration steps/sec^2
unsigned long fan_speed;
#if FAN_COUNT > 0
unsigned long fan_speed[FAN_COUNT];
#endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
unsigned long valve_pressure; unsigned long valve_pressure;
unsigned long e_to_p_pressure; unsigned long e_to_p_pressure;
#endif #endif
volatile char busy; volatile char busy;
} block_t; } block_t;
#define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1)) #define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1))

84
Marlin/temperature.cpp
Unescape View File

@ -62,7 +62,7 @@ float current_temperature_bed = 0.0;
#endif //PIDTEMPBED #endif //PIDTEMPBED
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
unsigned char fanSpeedSoftPwm; unsigned char fanSpeedSoftPwm[FAN_COUNT];
#endif #endif
unsigned char soft_pwm_bed; unsigned char soft_pwm_bed;
@ -130,7 +130,7 @@ static volatile bool temp_meas_ready = false;
static unsigned char soft_pwm[EXTRUDERS]; static unsigned char soft_pwm[EXTRUDERS];
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
static unsigned char soft_pwm_fan; static unsigned char soft_pwm_fan[FAN_COUNT];
#endif #endif
#if HAS_AUTO_FAN #if HAS_AUTO_FAN
static millis_t next_auto_fan_check_ms; static millis_t next_auto_fan_check_ms;
@ -886,17 +886,40 @@ void tp_init() {
#if HAS_HEATER_BED #if HAS_HEATER_BED
SET_OUTPUT(HEATER_BED_PIN); SET_OUTPUT(HEATER_BED_PIN);
#endif #endif
#if HAS_FAN
#if ENABLED(FAST_PWM_FAN) || ENABLED(FAN_SOFT_PWM) #if ENABLED(FAST_PWM_FAN) || ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0
SET_OUTPUT(FAN_PIN); SET_OUTPUT(FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
soft_pwm_fan = fanSpeedSoftPwm / 2; soft_pwm_fan[0] = fanSpeedSoftPwm[0] / 2;
#endif
#endif
#if HAS_FAN1
SET_OUTPUT(FAN1_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(FAN1_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#if ENABLED(FAN_SOFT_PWM)
soft_pwm_fan[1] = fanSpeedSoftPwm[1] / 2;
#endif
#endif
#if HAS_FAN2
SET_OUTPUT(FAN2_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(FAN2_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#if ENABLED(FAN_SOFT_PWM)
soft_pwm_fan[2] = fanSpeedSoftPwm[2] / 2;
#endif #endif
#endif #endif
#endif
#endif // FAST_PWM_FAN || FAN_SOFT_PWM
#if ENABLED(HEATER_0_USES_MAX6675) #if ENABLED(HEATER_0_USES_MAX6675)
@ -1320,9 +1343,20 @@ ISR(TIMER0_COMPB_vect) {
soft_pwm_BED = soft_pwm_bed; soft_pwm_BED = soft_pwm_bed;
WRITE_HEATER_BED(soft_pwm_BED > 0 ? 1 : 0); WRITE_HEATER_BED(soft_pwm_BED > 0 ? 1 : 0);
#endif #endif
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
soft_pwm_fan = fanSpeedSoftPwm / 2; #if HAS_FAN0
WRITE_FAN(soft_pwm_fan > 0 ? 1 : 0); soft_pwm_fan[0] = fanSpeedSoftPwm[0] / 2;
WRITE_FAN(soft_pwm_fan[0] > 0 ? 1 : 0);
#endif
#if HAS_FAN1
soft_pwm_fan[1] = fanSpeedSoftPwm[1] / 2;
WRITE_FAN1(soft_pwm_fan[1] > 0 ? 1 : 0);
#endif
#if HAS_FAN2
soft_pwm_fan[2] = fanSpeedSoftPwm[2] / 2;
WRITE_FAN2(soft_pwm_fan[2] > 0 ? 1 : 0);
#endif
#endif #endif
} }
@ -1342,7 +1376,15 @@ ISR(TIMER0_COMPB_vect) {
#endif #endif
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
if (soft_pwm_fan < pwm_count) WRITE_FAN(0); #if HAS_FAN0
if (soft_pwm_fan[0] < pwm_count) WRITE_FAN(0);
#endif
#if HAS_FAN1
if (soft_pwm_fan[1] < pwm_count) WRITE_FAN1(0);
#endif
#if HAS_FAN2
if (soft_pwm_fan[2] < pwm_count) WRITE_FAN2(0);
#endif
#endif #endif
pwm_count += _BV(SOFT_PWM_SCALE); pwm_count += _BV(SOFT_PWM_SCALE);
@ -1421,10 +1463,28 @@ ISR(TIMER0_COMPB_vect) {
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
if (pwm_count == 0) { if (pwm_count == 0) {
soft_pwm_fan = fanSpeedSoftPwm / 2; #if HAS_FAN0
WRITE_FAN(soft_pwm_fan > 0 ? 1 : 0); soft_pwm_fan[0] = fanSpeedSoftPwm[0] / 2;
WRITE_FAN(soft_pwm_fan[0] > 0 ? 1 : 0);
#endif
#if HAS_FAN1
soft_pwm_fan[1] = fanSpeedSoftPwm[1] / 2;
WRITE_FAN1(soft_pwm_fan[1] > 0 ? 1 : 0);
#endif
#if HAS_FAN2
soft_pwm_fan[2] = fanSpeedSoftPwm[2] / 2;
WRITE_FAN2(soft_pwm_fan[2] > 0 ? 1 : 0);
#endif
} }
if (soft_pwm_fan < pwm_count) WRITE_FAN(0); #if HAS_FAN0
if (soft_pwm_fan[0] < pwm_count) WRITE_FAN(0);
#endif
#if HAS_FAN1
if (soft_pwm_fan[1] < pwm_count) WRITE_FAN1(0);
#endif
#if HAS_FAN2
if (soft_pwm_fan[2] < pwm_count) WRITE_FAN2(0);
#endif
#endif //FAN_SOFT_PWM #endif //FAN_SOFT_PWM
pwm_count += _BV(SOFT_PWM_SCALE); pwm_count += _BV(SOFT_PWM_SCALE);

46
Marlin/ultralcd.cpp
Unescape View File

@ -614,7 +614,22 @@ static void lcd_tune_menu() {
// //
// Fan Speed: // Fan Speed:
// //
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); #if FAN_COUNT > 0
#if HAS_FAN0
#if FAN_COUNT > 1
#define MSG_1ST_FAN_SPEED MSG_FAN_SPEED " 1"
#else
#define MSG_1ST_FAN_SPEED MSG_FAN_SPEED
#endif
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_1ST_FAN_SPEED, &fanSpeeds[0], 0, 255);
#endif
#if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
#endif
#if HAS_FAN2
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255);
#endif
#endif // FAN_COUNT > 0
// //
// Flow: // Flow:
@ -665,7 +680,13 @@ void _lcd_preheat(int endnum, const float temph, const float tempb, const int fa
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
setTargetBed(tempb); setTargetBed(tempb);
#endif #endif
fanSpeed = fan; #if FAN_COUNT > 0
#if FAN_COUNT > 1
fanSpeeds[active_extruder < FAN_COUNT ? active_extruder : 0] = fan;
#else
fanSpeeds[0] = fan;
#endif
#endif
lcd_return_to_status(); lcd_return_to_status();
} }
@ -755,8 +776,10 @@ void _lcd_preheat(int endnum, const float temph, const float tempb, const int fa
#endif // TEMP_SENSOR_0 && (TEMP_SENSOR_1 || TEMP_SENSOR_2 || TEMP_SENSOR_3 || TEMP_SENSOR_BED) #endif // TEMP_SENSOR_0 && (TEMP_SENSOR_1 || TEMP_SENSOR_2 || TEMP_SENSOR_3 || TEMP_SENSOR_BED)
void lcd_cooldown() { void lcd_cooldown() {
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
#endif
disable_all_heaters(); disable_all_heaters();
fanSpeed = 0;
lcd_return_to_status(); lcd_return_to_status();
} }
@ -1125,7 +1148,22 @@ static void lcd_control_temperature_menu() {
// //
// Fan Speed: // Fan Speed:
// //
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); #if FAN_COUNT > 0
#if HAS_FAN0
#if FAN_COUNT > 1
#define MSG_1ST_FAN_SPEED MSG_FAN_SPEED " 1"
#else
#define MSG_1ST_FAN_SPEED MSG_FAN_SPEED
#endif
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_1ST_FAN_SPEED, &fanSpeeds[0], 0, 255);
#endif
#if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
#endif
#if HAS_FAN2
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255);
#endif
#endif // FAN_COUNT > 0
// //
// Autotemp, Min, Max, Fact // Autotemp, Min, Max, Fact

20
Marlin/ultralcd_implementation_hitachi_HD44780.h
Unescape View File

@ -873,16 +873,34 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
// Set the LEDS - referred to as backlights by the LiquidTWI2 library // Set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0; static uint8_t ledsprev = 0;
uint8_t leds = 0; uint8_t leds = 0;
if (target_temperature_bed > 0) leds |= LED_A; if (target_temperature_bed > 0) leds |= LED_A;
if (target_temperature[0] > 0) leds |= LED_B; if (target_temperature[0] > 0) leds |= LED_B;
if (fanSpeed) leds |= LED_C;
#if FAN_COUNT > 0
if (0
#if HAS_FAN0
|| fanSpeeds[0]
#endif
#if HAS_FAN1
|| fanSpeeds[1]
#endif
#if HAS_FAN2
|| fanSpeeds[2]
#endif
) leds |= LED_C;
#endif // FAN_COUNT > 0
#if EXTRUDERS > 1 #if EXTRUDERS > 1
if (target_temperature[1] > 0) leds |= LED_C; if (target_temperature[1] > 0) leds |= LED_C;
#endif #endif
if (leds != ledsprev) { if (leds != ledsprev) {
lcd.setBacklight(leds); lcd.setBacklight(leds);
ledsprev = leds; ledsprev = leds;
} }
} }
#endif // LCD_HAS_STATUS_INDICATORS #endif // LCD_HAS_STATUS_INDICATORS

Write Preview
Loading…
Cancel
Save