forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Changes for parity with 2.0.x

Browse Source
master
Scott Lahteine 7 years ago
parent 93560836de
commit 1063b3b2b8
10 changed files with 86 additions and 81 deletions
Show Stats Download Patch File Download Diff File

46
Marlin/G26_Mesh_Validation_Tool.cpp
Unescape View File

@ -164,6 +164,7 @@
static int8_t g26_prime_flag; static int8_t g26_prime_flag;
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
/** /**
* Detect is_lcd_clicked, debounce it, and return true for cancel * Detect is_lcd_clicked, debounce it, and return true for cancel
*/ */
@ -185,28 +186,27 @@
lcd_reset_status(); lcd_reset_status();
return true; return true;
} }
#endif
#if ENABLED(NEWPANEL)
bool exit_from_g26() { bool exit_from_g26() {
lcd_setstatusPGM(PSTR("Leaving G26"), -1); lcd_setstatusPGM(PSTR("Leaving G26"), -1);
wait_for_release(); wait_for_release();
return G26_ERR; return G26_ERR;
} }
#endif #endif
void G26_line_to_destination(const float &feed_rate) { void G26_line_to_destination(const float &feed_rate) {
const float save_feedrate = feedrate_mm_s; const float save_feedrate = feedrate_mm_s;
feedrate_mm_s = feed_rate; // use specified feed rate feedrate_mm_s = feed_rate; // use specified feed rate
prepare_move_to_destination(); // will ultimately call ubl.line_to_destination_cartesian for UBL or ubl.prepare_linear_move_to for UBL_DELTA prepare_move_to_destination(); // will ultimately call ubl.line_to_destination_cartesian or ubl.prepare_linear_move_to for UBL_DELTA
feedrate_mm_s = save_feedrate; // restore global feed rate feedrate_mm_s = save_feedrate; // restore global feed rate
} }
void move_to(const float &x, const float &y, const float &z, const float &e_delta) { void move_to(const float &rx, const float &ry, const float &z, const float &e_delta) {
float feed_value; float feed_value;
static float last_z = -999.99; static float last_z = -999.99;
bool has_xy_component = (x != current_position[X_AXIS] || y != current_position[Y_AXIS]); // Check if X or Y is involved in the movement. bool has_xy_component = (rx != current_position[X_AXIS] || ry != current_position[Y_AXIS]); // Check if X or Y is involved in the movement.
if (z != last_z) { if (z != last_z) {
last_z = z; last_z = z;
@ -229,8 +229,8 @@
if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value); if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value);
destination[X_AXIS] = x; destination[X_AXIS] = rx;
destination[Y_AXIS] = y; destination[Y_AXIS] = ry;
destination[E_AXIS] += e_delta; destination[E_AXIS] += e_delta;
G26_line_to_destination(feed_value); G26_line_to_destination(feed_value);
@ -292,13 +292,11 @@
wait_for_release(); wait_for_release();
#if ENABLED(ULTRA_LCD) strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue;
strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue; // So... We cheat to get a message up.
// So... We cheat to get a message up. lcd_setstatusPGM(PSTR("Done Priming"), 99);
lcd_setstatusPGM(PSTR("Done Priming"), 99); lcd_quick_feedback();
lcd_quick_feedback(); lcd_external_control = false;
lcd_external_control = false;
#endif
} }
else else
#endif #endif
@ -490,17 +488,11 @@
return false; return false;
} }
float valid_trig_angle(float d) {
while (d > 360.0) d -= 360.0;
while (d < 0.0) d += 360.0;
return d;
}
/** /**
* Turn on the bed and nozzle heat and * Turn on the bed and nozzle heat and
* wait for them to get up to temperature. * wait for them to get up to temperature.
*/ */
bool turn_on_heaters() { inline bool turn_on_heaters() {
millis_t next = millis() + 5000UL; millis_t next = millis() + 5000UL;
#if HAS_TEMP_BED #if HAS_TEMP_BED
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
@ -554,10 +546,16 @@
return G26_OK; return G26_OK;
} }
float valid_trig_angle(float d) {
while (d > 360.0) d -= 360.0;
while (d < 0.0) d += 360.0;
return d;
}
/** /**
* G26: Mesh Validation Pattern generation. * G26: Mesh Validation Pattern generation.
* *
* Used to interactively edit UBL's Mesh by placing the * Used to interactively edit the mesh by placing the
* nozzle in a problem area and doing a G29 P4 R command. * nozzle in a problem area and doing a G29 P4 R command.
*/ */
void gcode_G26() { void gcode_G26() {
@ -703,12 +701,12 @@
set_current_from_destination(); set_current_from_destination();
} }
if (turn_on_heaters()) goto LEAVE; if (turn_on_heaters() != G26_OK) goto LEAVE;
current_position[E_AXIS] = 0.0; current_position[E_AXIS] = 0.0;
sync_plan_position_e(); sync_plan_position_e();
if (g26_prime_flag && prime_nozzle()) goto LEAVE; if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE;
/** /**
* Bed is preheated * Bed is preheated

4
Marlin/SanityCheck.h
Unescape View File

@ -298,11 +298,15 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#error "LCD_PROGRESS_BAR requires SDSUPPORT." #error "LCD_PROGRESS_BAR requires SDSUPPORT."
#elif DISABLED(ULTRA_LCD)
#error "LCD_PROGRESS_BAR requires a character LCD."
#elif ENABLED(DOGLCD) #elif ENABLED(DOGLCD)
#error "LCD_PROGRESS_BAR does not apply to graphical displays." #error "LCD_PROGRESS_BAR does not apply to graphical displays."
#elif ENABLED(FILAMENT_LCD_DISPLAY) #elif ENABLED(FILAMENT_LCD_DISPLAY)
#error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
#endif #endif
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && DISABLED(DOGLCD)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR or Graphical LCD."
#endif #endif
/** /**

4
Marlin/language_en.h
Unescape View File

@ -813,8 +813,8 @@
#ifndef MSG_DELTA_HEIGHT_CALIBRATE #ifndef MSG_DELTA_HEIGHT_CALIBRATE
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
#endif #endif
#ifndef MSG_DELTA_DIAG_ROG #ifndef MSG_DELTA_DIAG_ROD
#define MSG_DELTA_DIAG_ROG _UxGT("Diag Rod") #define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod")
#endif #endif
#ifndef MSG_DELTA_HEIGHT #ifndef MSG_DELTA_HEIGHT
#define MSG_DELTA_HEIGHT _UxGT("Height") #define MSG_DELTA_HEIGHT _UxGT("Height")

13
Marlin/planner.cpp
Unescape View File

@ -124,15 +124,20 @@ float Planner::min_feedrate_mm_s,
Planner::inverse_z_fade_height, Planner::inverse_z_fade_height,
Planner::last_fade_z; Planner::last_fade_z;
#endif #endif
#else
constexpr bool Planner::leveling_active;
#endif #endif
#if ENABLED(SKEW_CORRECTION) #if ENABLED(SKEW_CORRECTION)
#if ENABLED(SKEW_CORRECTION_GCODE) #if ENABLED(SKEW_CORRECTION_GCODE)
// Initialized by settings.load()
float Planner::xy_skew_factor; float Planner::xy_skew_factor;
#if ENABLED(SKEW_CORRECTION_FOR_Z) #else
float Planner::xz_skew_factor, Planner::yz_skew_factor; constexpr float Planner::xy_skew_factor;
#endif #endif
#if ENABLED(SKEW_CORRECTION_FOR_Z) && ENABLED(SKEW_CORRECTION_GCODE)
float Planner::xz_skew_factor, Planner::yz_skew_factor;
#else
constexpr float Planner::xz_skew_factor, Planner::yz_skew_factor;
#endif #endif
#endif #endif

2
Marlin/temperature.cpp
Unescape View File

@ -1273,7 +1273,7 @@ void Temperature::init() {
* their target temperature by a configurable margin. * their target temperature by a configurable margin.
* This is called when the temperature is set. (M104, M109) * This is called when the temperature is set. (M104, M109)
*/ */
void Temperature::start_watching_heater(uint8_t e) { void Temperature::start_watching_heater(const uint8_t e) {
#if HOTENDS == 1 #if HOTENDS == 1
UNUSED(e); UNUSED(e);
#endif #endif

6
Marlin/temperature.h
Unescape View File

@ -370,14 +370,14 @@ class Temperature {
static int16_t degTargetBed() { return target_temperature_bed; } static int16_t degTargetBed() { return target_temperature_bed; }
#if WATCH_HOTENDS #if WATCH_HOTENDS
static void start_watching_heater(uint8_t e = 0); static void start_watching_heater(const uint8_t e = 0);
#endif #endif
#if WATCH_THE_BED #if WATCH_THE_BED
static void start_watching_bed(); static void start_watching_bed();
#endif #endif
static void setTargetHotend(const int16_t celsius, uint8_t e) { static void setTargetHotend(const int16_t celsius, const uint8_t e) {
#if HOTENDS == 1 #if HOTENDS == 1
UNUSED(e); UNUSED(e);
#endif #endif
@ -455,7 +455,7 @@ class Temperature {
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
static void babystep_axis(const AxisEnum axis, const int distance) { static void babystep_axis(const AxisEnum axis, const int16_t distance) {
if (axis_known_position[axis]) { if (axis_known_position[axis]) {
#if IS_CORE #if IS_CORE
#if ENABLED(BABYSTEP_XY) #if ENABLED(BABYSTEP_XY)

2
Marlin/ubl.h
Unescape View File

@ -84,7 +84,7 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
static void move_z_with_encoder(const float &multiplier); static void move_z_with_encoder(const float &multiplier);
static float measure_point_with_encoder(); static float measure_point_with_encoder();
static float measure_business_card_thickness(float); static float measure_business_card_thickness(const float&);
static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool); static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool);
static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map); static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map);
#endif #endif

26
Marlin/ubl_G29.cpp
Unescape View File

@ -45,7 +45,7 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
void lcd_return_to_status(); void lcd_return_to_status();
void lcd_mesh_edit_setup(float initial); void lcd_mesh_edit_setup(const float initial);
float lcd_mesh_edit(); float lcd_mesh_edit();
void lcd_z_offset_edit_setup(float); void lcd_z_offset_edit_setup(float);
extern void _lcd_ubl_output_map_lcd(); extern void _lcd_ubl_output_map_lcd();
@ -57,8 +57,9 @@
extern float probe_pt(const float &rx, const float &ry, const bool, const uint8_t, const bool=true); extern float probe_pt(const float &rx, const float &ry, const bool, const uint8_t, const bool=true);
extern bool set_probe_deployed(bool); extern bool set_probe_deployed(bool);
extern void set_bed_leveling_enabled(bool); extern void set_bed_leveling_enabled(bool);
typedef void (*screenFunc_t)(); typedef void (*screenFunc_t)();
extern void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0); extern void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder=0);
#define SIZE_OF_LITTLE_RAISE 1 #define SIZE_OF_LITTLE_RAISE 1
#define BIG_RAISE_NOT_NEEDED 0 #define BIG_RAISE_NOT_NEEDED 0
@ -644,8 +645,8 @@
SERIAL_ECHOPAIR(" J ", y); SERIAL_ECHOPAIR(" J ", y);
SERIAL_ECHOPGM(" Z "); SERIAL_ECHOPGM(" Z ");
SERIAL_ECHO_F(z_values[x][y], 6); SERIAL_ECHO_F(z_values[x][y], 6);
SERIAL_ECHOPAIR(" ; X ", mesh_index_to_xpos(x)); SERIAL_ECHOPAIR(" ; X ", LOGICAL_X_POSITION(mesh_index_to_xpos(x)));
SERIAL_ECHOPAIR(", Y ", mesh_index_to_ypos(y)); SERIAL_ECHOPAIR(", Y ", LOGICAL_Y_POSITION(mesh_index_to_ypos(y)));
SERIAL_EOL(); SERIAL_EOL();
} }
return; return;
@ -799,7 +800,6 @@
z_values[location.x_index][location.y_index] = measured_z; z_values[location.x_index][location.y_index] = measured_z;
} }
} while (location.x_index >= 0 && --max_iterations); } while (location.x_index >= 0 && --max_iterations);
STOW_PROBE(); STOW_PROBE();
@ -914,6 +914,7 @@
} }
} }
} }
#endif // HAS_BED_PROBE #endif // HAS_BED_PROBE
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
@ -938,7 +939,7 @@
static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); } static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); }
float unified_bed_leveling::measure_business_card_thickness(float in_height) { float unified_bed_leveling::measure_business_card_thickness(const float &in_height) {
lcd_external_control = true; lcd_external_control = true;
save_ubl_active_state_and_disable(); // Disable bed level correction for probing save_ubl_active_state_and_disable(); // Disable bed level correction for probing
@ -971,8 +972,6 @@
SERIAL_PROTOCOLLNPGM("mm thick."); SERIAL_PROTOCOLLNPGM("mm thick.");
} }
in_height = current_position[Z_AXIS]; // do manual probing at lower height
lcd_external_control = false; lcd_external_control = false;
restore_ubl_active_state_and_leave(); restore_ubl_active_state_and_leave();
@ -1460,10 +1459,9 @@
float distance = HYPOT(px - mx, py - my); float distance = HYPOT(px - mx, py - my);
// factor in the distance from the current location for the normal case // factor in the distance from the current location for the normal case
// so the nozzle isn't running all over the bed. // so the nozzle isn't running all over the bed.
distance += HYPOT(current_position[X_AXIS] - mx, current_position[Y_AXIS] - my) * 0.1; distance += HYPOT(current_position[X_AXIS] - mx, current_position[Y_AXIS] - my) * 0.1;
if (distance < best_so_far) { if (distance < best_so_far) {
best_so_far = distance; // We found a closer location with best_so_far = distance; // We found a closer location with
out_mesh.x_index = i; // the specified type of mesh value. out_mesh.x_index = i; // the specified type of mesh value.
@ -1518,8 +1516,8 @@
if (location.x_index < 0) break; // stop when we can't find any more reachable points. if (location.x_index < 0) break; // stop when we can't find any more reachable points.
bitmap_clear(not_done, location.x_index, location.y_index); // Mark this location as 'adjusted' so we will find a bitmap_clear(not_done, location.x_index, location.y_index); // Mark this location as 'adjusted' so we will find a
// different location the next time through the loop // different location the next time through the loop
const float rawx = mesh_index_to_xpos(location.x_index), const float rawx = mesh_index_to_xpos(location.x_index),
rawy = mesh_index_to_ypos(location.y_index); rawy = mesh_index_to_ypos(location.y_index);

56
Marlin/ultralcd.cpp
Unescape View File

@ -57,16 +57,12 @@
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool lcd_external_control; bool lcd_external_control; // = false
#endif #endif
// Initialized by settings.load() // Initialized by settings.load()
int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && (ENABLED(LCD_PROGRESS_BAR) || ENABLED(DOGLCD))
uint8_t progress_bar_percent;
#endif
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
millis_t previous_lcd_status_ms = 0; millis_t previous_lcd_status_ms = 0;
#endif #endif
@ -92,6 +88,10 @@ char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kan
uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash; uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash;
#endif #endif
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
uint8_t progress_bar_percent;
#endif
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
#include "ultralcd_impl_DOGM.h" #include "ultralcd_impl_DOGM.h"
#include <U8glib.h> #include <U8glib.h>
@ -259,10 +259,6 @@ uint16_t max_display_update_time = 0;
//////////// Menu System Macros //////////// //////////// Menu System Macros ////////////
//////////////////////////////////////////// ////////////////////////////////////////////
#ifndef ENCODER_FEEDRATE_DEADZONE
#define ENCODER_FEEDRATE_DEADZONE 6
#endif
/** /**
* MENU_ITEM generates draw & handler code for a menu item, potentially calling: * MENU_ITEM generates draw & handler code for a menu item, potentially calling:
* *
@ -734,7 +730,7 @@ void kill_screen(const char* lcd_msg) {
* Audio feedback for controller clicks * Audio feedback for controller clicks
* *
*/ */
void lcd_buzz(long duration, uint16_t freq) { void lcd_buzz(const long duration, const uint16_t freq) {
#if ENABLED(LCD_USE_I2C_BUZZER) #if ENABLED(LCD_USE_I2C_BUZZER)
lcd.buzz(duration, freq); lcd.buzz(duration, freq);
#elif PIN_EXISTS(BEEPER) #elif PIN_EXISTS(BEEPER)
@ -1180,7 +1176,7 @@ void kill_screen(const char* lcd_msg) {
return mesh_edit_value; return mesh_edit_value;
} }
void lcd_mesh_edit_setup(float initial) { void lcd_mesh_edit_setup(const float initial) {
mesh_edit_value = mesh_edit_accumulator = initial; mesh_edit_value = mesh_edit_accumulator = initial;
lcd_goto_screen(_lcd_mesh_edit_NOP); lcd_goto_screen(_lcd_mesh_edit_NOP);
} }
@ -1332,9 +1328,9 @@ void kill_screen(const char* lcd_msg) {
#if FAN_COUNT > 0 #if FAN_COUNT > 0
#if HAS_FAN0 #if HAS_FAN0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255);
#endif #endif
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
@ -1836,7 +1832,6 @@ void kill_screen(const char* lcd_msg) {
/** /**
* Step 6: Display "Next point: 1 / 9" while waiting for move to finish * Step 6: Display "Next point: 1 / 9" while waiting for move to finish
*/ */
void _lcd_level_bed_moving() { void _lcd_level_bed_moving() {
if (lcdDrawUpdate) { if (lcdDrawUpdate) {
char msg[10]; char msg[10];
@ -2649,7 +2644,7 @@ void kill_screen(const char* lcd_msg) {
void lcd_move_z(); void lcd_move_z();
void _man_probe_pt(const float rx, const float ry) { void _man_probe_pt(const float &rx, const float &ry) {
#if HAS_LEVELING #if HAS_LEVELING
reset_bed_level(); // After calibration bed-level data is no longer valid reset_bed_level(); // After calibration bed-level data is no longer valid
#endif #endif
@ -2712,7 +2707,7 @@ void kill_screen(const char* lcd_msg) {
void lcd_delta_settings() { void lcd_delta_settings() {
START_MENU(); START_MENU();
MENU_BACK(MSG_DELTA_CALIBRATE); MENU_BACK(MSG_DELTA_CALIBRATE);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_DIAG_ROG, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, recalc_delta_settings); MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, recalc_delta_settings);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, recalc_delta_settings); MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, recalc_delta_settings);
MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, recalc_delta_settings); MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, recalc_delta_settings);
MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, recalc_delta_settings); MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, recalc_delta_settings);
@ -2785,10 +2780,7 @@ void kill_screen(const char* lcd_msg) {
manual_move_offset = 0.0; manual_move_offset = 0.0;
manual_move_axis = (int8_t)NO_AXIS; manual_move_axis = (int8_t)NO_AXIS;
// DELTA and SCARA machines use segmented moves, which could fill the planner during the call to // Set a blocking flag so no new moves can be added until all segments are done
// move_to_destination. This will cause idle() to be called, which can then call this function while the
// previous invocation is being blocked. Modifications to manual_move_offset shouldn't be made while
// processing_manual_move is true or the planner will get out of sync.
processing_manual_move = true; processing_manual_move = true;
prepare_move_to_destination(); // will call set_current_from_destination() prepare_move_to_destination(); // will call set_current_from_destination()
processing_manual_move = false; processing_manual_move = false;
@ -2868,7 +2860,6 @@ void kill_screen(const char* lcd_msg) {
#if ENABLED(MAX_SOFTWARE_ENDSTOP_Z) #if ENABLED(MAX_SOFTWARE_ENDSTOP_Z)
max = soft_endstop_max[Z_AXIS]; max = soft_endstop_max[Z_AXIS];
#endif #endif
break;
default: break; default: break;
} }
#endif // MIN_SOFTWARE_ENDSTOPS || MAX_SOFTWARE_ENDSTOPS #endif // MIN_SOFTWARE_ENDSTOPS || MAX_SOFTWARE_ENDSTOPS
@ -3142,7 +3133,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu); MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, (int*)&lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true); MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
@ -4339,6 +4330,7 @@ void kill_screen(const char* lcd_msg) {
} \ } \
typedef void _name typedef void _name
DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01);
DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1); DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1);
DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1); DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1);
DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0); DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0);
@ -4348,7 +4340,6 @@ void kill_screen(const char* lcd_msg) {
DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0); DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0);
DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0); DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0);
DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0); DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0);
DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01);
/** /**
* *
@ -4611,8 +4602,13 @@ void lcd_update() {
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
static millis_t return_to_status_ms = 0; static millis_t return_to_status_ms = 0;
// Handle any queued Move Axis motion
manage_manual_move(); manage_manual_move();
// Update button states for LCD_CLICKED, etc.
// After state changes the next button update
// may be delayed 300-500ms.
lcd_buttons_update(); lcd_buttons_update();
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
@ -4947,7 +4943,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#define encrot3 1 #define encrot3 1
#endif #endif
#define GET_BUTTON_STATES(DST) \ #define GET_SHIFT_BUTTON_STATES(DST) \
uint8_t new_##DST = 0; \ uint8_t new_##DST = 0; \
WRITE(SHIFT_LD, LOW); \ WRITE(SHIFT_LD, LOW); \
WRITE(SHIFT_LD, HIGH); \ WRITE(SHIFT_LD, HIGH); \
@ -4966,7 +4962,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
*/ */
void lcd_buttons_update() { void lcd_buttons_update() {
static uint8_t lastEncoderBits; static uint8_t lastEncoderBits;
millis_t now = millis(); const millis_t now = millis();
if (ELAPSED(now, next_button_update_ms)) { if (ELAPSED(now, next_button_update_ms)) {
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
@ -5047,13 +5043,15 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#elif ENABLED(REPRAPWORLD_KEYPAD) #elif ENABLED(REPRAPWORLD_KEYPAD)
GET_BUTTON_STATES(buttons_reprapworld_keypad); GET_SHIFT_BUTTON_STATES(buttons_reprapworld_keypad);
#endif #endif
#else #else // !NEWPANEL
GET_BUTTON_STATES(buttons);
#endif // !NEWPANEL GET_SHIFT_BUTTON_STATES(buttons);
#endif
} // next_button_update_ms } // next_button_update_ms

8
Marlin/ultralcd.h
Unescape View File

@ -23,10 +23,12 @@
#ifndef ULTRALCD_H #ifndef ULTRALCD_H
#define ULTRALCD_H #define ULTRALCD_H
#include "Marlin.h" #include "MarlinConfig.h"
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#include "Marlin.h"
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
extern bool lcd_external_control; extern bool lcd_external_control;
#if ENABLED(G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
@ -57,7 +59,7 @@
inline void lcd_refresh() { lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; } inline void lcd_refresh() { lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; }
#if HAS_BUZZER #if HAS_BUZZER
void lcd_buzz(long duration, uint16_t freq); void lcd_buzz(const long duration, const uint16_t freq);
#endif #endif
#if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0 #if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0
@ -205,7 +207,7 @@
void lcd_reset_status(); void lcd_reset_status();
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
void lcd_mesh_edit_setup(float initial); void lcd_mesh_edit_setup(const float initial);
float lcd_mesh_edit(); float lcd_mesh_edit();
void lcd_z_offset_edit_setup(float); void lcd_z_offset_edit_setup(float);
float lcd_z_offset_edit(); float lcd_z_offset_edit();

Write Preview
Loading…
Cancel
Save