forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977

Browse Source
master
Scott Lahteine 9 years ago committed by Richard Wackerbarth
parent 1112dcd3c2
commit 159ff94afd
18 changed files with 0 additions and 90 deletions
Show Stats Download Patch File Download Diff File

5
Marlin/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/configurator/config/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/Felix/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/Felix/Configuration_DUAL.h
Unescape View File

@ -167,11 +167,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/Hephestos/Configuration.h
Unescape View File

@ -181,11 +181,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 260 #define HEATER_3_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/K8200/Configuration.h
Unescape View File

@ -183,11 +183,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/RigidBot/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -203,11 +203,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
#define EXTRUDER_WATTS (2*2/5.9) // P=I^2/R #define EXTRUDER_WATTS (2*2/5.9) // P=I^2/R
#define BED_WATTS (5.45*5.45/2.2) // P=I^2/R #define BED_WATTS (5.45*5.45/2.2) // P=I^2/R

5
Marlin/example_configurations/TAZ4/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 250 #define HEATER_3_MAXTEMP 250
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/WITBOX/Configuration.h
Unescape View File

@ -181,11 +181,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 260 #define HEATER_3_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/adafruit/ST7565/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/delta/biv2.5/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/delta/generic/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/delta/kossel_pro/Configuration.h
Unescape View File

@ -182,11 +182,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

5
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R

Write Preview
Loading…
Cancel
Save