Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977

Marlin/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/configurator/config/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/Felix/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/Felix/Configuration_DUAL.h

@@ -167,11 +167,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/Hephestos/Configuration.h

@@ -181,11 +181,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 260
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/K8200/Configuration.h

@@ -183,11 +183,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/RigidBot/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/SCARA/Configuration.h

@@ -203,11 +203,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 #define EXTRUDER_WATTS (2*2/5.9) //  P=I^2/R
 #define BED_WATTS (5.45*5.45/2.2)      // P=I^2/R

Marlin/example_configurations/TAZ4/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 250
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/WITBOX/Configuration.h

@@ -181,11 +181,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 260
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/delta/generic/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -182,11 +182,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/makibox/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated:
 #define HEATER_3_MAXTEMP 275
 #define BED_MAXTEMP 150
 
-// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
-// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
-// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
-//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
-
 // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
 //#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
 //#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R