correcting commit errors.

Marlin/Marlin.h

@@ -79,18 +79,6 @@ extern float homing_feedrate[];
 extern bool axis_relative_modes[];
 
 
-inline void kill()
+void kill();
-{
-  disable_heater();
-
-  disable_x();
-  disable_y();
-  disable_z();
-  disable_e();
-  
-  if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
-  Serial.println("!! Printer halted. kill() called !!");
-  while(1); // Wait for reset
-}
 
 #endif

Marlin/Marlin.pde

@@ -1278,3 +1278,18 @@ void manage_inactivity(byte debug) {
   check_axes_activity();
 }
 
+void kill()
+{
+  disable_heater();
+
+  disable_x();
+  disable_y();
+  disable_z();
+  disable_e();
+  
+  if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
+  Serial.println("!! Printer halted. kill() called !!");
+  while(1); // Wait for reset
+}
+
+

Marlin/temperature.cpp

@@ -36,6 +36,7 @@
 #include "ultralcd.h"
 #include "streaming.h"
 #include "temperature.h"
+#include "watchdog.h"
 
 
 int target_raw[3] = {0, 0, 0};
@@ -350,6 +351,28 @@ void setWatch()
 }
 
 
+void disable_heater()
+{
+   #if TEMP_0_PIN > -1
+  target_raw[0]=0;
+   #if HEATER_0_PIN > -1  
+     WRITE(HEATER_0_PIN,LOW);
+   #endif
+  #endif
+  #if TEMP_1_PIN > -1
+  target_raw[1]=0;
+  #if HEATER_1_PIN > -1 
+    WRITE(HEATER_1_PIN,LOW);
+  #endif
+  #endif
+  #if TEMP_2_PIN > -1
+  target_raw[2]=0;
+  #if HEATER_2_PIN > -1  
+    WRITE(HEATER_2_PIN,LOW);
+  #endif
+  #endif 
+}
+
 // Timer 0 is shared with millies
 ISR(TIMER0_COMPB_vect)
 {

Marlin/temperature.h

@@ -42,7 +42,7 @@ extern int target_raw[3];
 extern int current_raw[3];
 extern float Kp,Ki,Kd,Kc;
 #ifdef PIDTEMP
-  float pid_setpoint = 0.0;
+  extern float pid_setpoint ;
 #endif
 #ifdef WATCHPERIOD
   extern int watch_raw[3] ;
@@ -81,38 +81,9 @@ inline bool isCoolingHotend0() {return target_raw[TEMPSENSOR_HOTEND_0] < current
 inline bool isCoolingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];};
 inline bool isCoolingBed() {return target_raw[TEMPSENSOR_BED] < current_raw[TEMPSENSOR_BED];};
 
-inline void disable_heater()
+void disable_heater();
-{
+void setWatch();
-   #if TEMP_0_PIN > -1
+
-  target_raw[0]=0;
-   #if HEATER_0_PIN > -1  
-     WRITE(HEATER_0_PIN,LOW);
-   #endif
-  #endif
-  #if TEMP_1_PIN > -1
-  target_raw[1]=0;
-  #if HEATER_1_PIN > -1 
-    WRITE(HEATER_1_PIN,LOW);
-  #endif
-  #endif
-  #if TEMP_2_PIN > -1
-  target_raw[2]=0;
-  #if HEATER_2_PIN > -1  
-    WRITE(HEATER_2_PIN,LOW);
-  #endif
-  #endif 
-}
-void setWatch() {  
-  if(isHeatingHotend0())
-  {
-    watchmillis = max(1,millis());
-    watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0];
-  }
-  else
-  {
-    watchmillis = 0;
-  } 
-}
 #ifdef HEATER_0_USES_THERMISTOR
     #define HEATERSOURCE 1
 #endif

Marlin/watchdog.h

@@ -1,10 +1,13 @@
 #ifndef __WATCHDOGH
 #define __WATCHDOGH
-#ifdef
+#include "Configuration.h"
+//#ifdef USE_WATCHDOG
+
 /// intialise watch dog with a 1 sec interrupt time
 void wd_init();
 /// pad the dog/reset watchdog. MUST be called at least every second after the first wd_init or avr will go into emergency procedures..
 void wd_reset();
 
+//#endif
 
 #endif

Marlin/watchdog.pde

@@ -1,5 +1,5 @@
 #ifdef USE_WATCHDOG
-
+#include "watchdog.h"
 #include  <avr/wdt.h>
 #include  <avr/interrupt.h>
 

watchdog.cpp

@@ -1,48 +0,0 @@
-#ifdef USE_WATCHDOG
-
-#include  <avr/wdt.h>
-#include  <avr/interrupt.h>
-
-volatile uint8_t timeout_seconds=0;
-
-void(* ctrlaltdelete) (void) = 0; //does not work on my atmega2560
-
-//Watchdog timer interrupt, called if main program blocks >1sec
-ISR(WDT_vect) 
-{ 
-  if(timeout_seconds++ >= WATCHDOG_TIMEOUT)
-  {
- 
-    #ifdef RESET_MANUAL
-      LCD_MESSAGE("Please Reset!");
-      ECHOLN("echo_: Something is wrong, please turn off the printer.");
-    #else
-      LCD_MESSAGE("Timeout, resetting!");
-    #endif 
-    //disable watchdog, it will survife reboot.
-    WDTCSR |= (1<<WDCE) | (1<<WDE);
-    WDTCSR = 0;
-    #ifdef RESET_MANUAL
-      kill(); //kill blocks
-      while(1); //wait for user or serial reset
-    #else
-      ctrlaltdelete();
-    #endif
-  }
-}
-
-/// intialise watch dog with a 1 sec interrupt time
-void wd_init() 
-{
-  WDTCSR = (1<<WDCE )|(1<<WDE ); //allow changes
-  WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )|  (1<<WDP2 )|(1<<WDP1)|(0<<WDP0);
-}
-
-/// reset watchdog. MUST be called every 1s after init or avr will reset.
-void wd_reset() 
-{
-  wdt_reset();
-  timeout_seconds=0; //reset counter for resets
-}
-
-#endif /* USE_WATCHDOG */

watchdog.h

@@ -1,10 +0,0 @@
-#ifndef __WATCHDOGH
-#define __WATCHDOGH
-#ifdef
-/// intialise watch dog with a 1 sec interrupt time
-void wd_init();
-/// pad the dog/reset watchdog. MUST be called at least every second after the first wd_init or avr will go into emergency procedures..
-void wd_reset();
-
-
-#endif