Make LCD preheat vars an array to reduce code size

master
Scott Lahteine 8 years ago
parent 1226ae1912
commit 1a2310c494

@ -5519,46 +5519,26 @@ inline void gcode_M140() {
*/ */
inline void gcode_M145() { inline void gcode_M145() {
int8_t material = code_seen('S') ? (int8_t)code_value_int() : 0; int8_t material = code_seen('S') ? (int8_t)code_value_int() : 0;
if (material < 0 || material > 1) { if (material < 0 || material >= COUNT(lcd_preheat_hotend_temp)) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX); SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX);
} }
else { else {
int v; int v;
switch (material) { if (code_seen('H')) {
case 0: v = code_value_int();
if (code_seen('H')) { lcd_preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
v = code_value_int();
preheatHotendTemp1 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
}
if (code_seen('F')) {
v = code_value_int();
preheatFanSpeed1 = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (code_seen('B')) {
v = code_value_int();
preheatBedTemp1 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
#endif
break;
case 1:
if (code_seen('H')) {
v = code_value_int();
preheatHotendTemp2 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
}
if (code_seen('F')) {
v = code_value_int();
preheatFanSpeed2 = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (code_seen('B')) {
v = code_value_int();
preheatBedTemp2 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
#endif
break;
} }
if (code_seen('F')) {
v = code_value_int();
lcd_preheat_fan_speed[material] = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (code_seen('B')) {
v = code_value_int();
lcd_preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
#endif
} }
} }

@ -86,12 +86,9 @@
* 301 M666 Z z_endstop_adj (float) * 301 M666 Z z_endstop_adj (float)
* *
* ULTIPANEL: * ULTIPANEL:
* 305 M145 S0 H preheatHotendTemp1 (int) * 305 M145 S0 H lcd_preheat_hotend_temp (int x2)
* 307 M145 S0 B preheatBedTemp1 (int) * 309 M145 S0 B lcd_preheat_bed_temp (int x2)
* 309 M145 S0 F preheatFanSpeed1 (int) * 313 M145 S0 F lcd_preheat_fan_speed (int x2)
* 311 M145 S1 H preheatHotendTemp2 (int)
* 313 M145 S1 B preheatBedTemp2 (int)
* 315 M145 S1 F preheatFanSpeed2 (int)
* *
* PIDTEMP: * PIDTEMP:
* 317 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) * 317 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
@ -277,16 +274,14 @@ void Config_Postprocess() {
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
int preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND, preheatBedTemp1 = PREHEAT_1_TEMP_BED, preheatFanSpeed1 = PREHEAT_1_FAN_SPEED, const int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND },
preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND, preheatBedTemp2 = PREHEAT_2_TEMP_BED, preheatFanSpeed2 = PREHEAT_2_FAN_SPEED; lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED },
lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED };
#endif // !ULTIPANEL #endif // !ULTIPANEL
EEPROM_WRITE(preheatHotendTemp1); EEPROM_WRITE(lcd_preheat_hotend_temp);
EEPROM_WRITE(preheatBedTemp1); EEPROM_WRITE(lcd_preheat_bed_temp);
EEPROM_WRITE(preheatFanSpeed1); EEPROM_WRITE(lcd_preheat_fan_speed);
EEPROM_WRITE(preheatHotendTemp2);
EEPROM_WRITE(preheatBedTemp2);
EEPROM_WRITE(preheatFanSpeed2);
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
@ -465,16 +460,12 @@ void Config_Postprocess() {
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1, int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2;
#endif #endif
EEPROM_READ(preheatHotendTemp1); EEPROM_READ(lcd_preheat_hotend_temp);
EEPROM_READ(preheatBedTemp1); EEPROM_READ(lcd_preheat_bed_temp);
EEPROM_READ(preheatFanSpeed1); EEPROM_READ(lcd_preheat_fan_speed);
EEPROM_READ(preheatHotendTemp2);
EEPROM_READ(preheatBedTemp2);
EEPROM_READ(preheatFanSpeed2);
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
@ -639,12 +630,12 @@ void Config_ResetDefault() {
#endif #endif
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND; lcd_preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND;
preheatBedTemp1 = PREHEAT_1_TEMP_BED; lcd_preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND;
preheatFanSpeed1 = PREHEAT_1_FAN_SPEED; lcd_preheat_bed_temp[0] = PREHEAT_1_TEMP_BED;
preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND; lcd_preheat_bed_temp[1] = PREHEAT_2_TEMP_BED;
preheatBedTemp2 = PREHEAT_2_TEMP_BED; lcd_preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED;
preheatFanSpeed2 = PREHEAT_2_FAN_SPEED; lcd_preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED;
#endif #endif
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
@ -863,15 +854,13 @@ void Config_ResetDefault() {
SERIAL_ECHOLNPGM("Material heatup parameters:"); SERIAL_ECHOLNPGM("Material heatup parameters:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
} }
SERIAL_ECHOPAIR(" M145 S0 H", preheatHotendTemp1); for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) {
SERIAL_ECHOPAIR(" B", preheatBedTemp1); SERIAL_ECHOPAIR(" M145 S", (int)i);
SERIAL_ECHOPAIR(" F", preheatFanSpeed1); SERIAL_ECHOPAIR(" H", lcd_preheat_hotend_temp[i]);
SERIAL_EOL; SERIAL_ECHOPAIR(" B", lcd_preheat_bed_temp[i]);
CONFIG_ECHO_START; SERIAL_ECHOPAIR(" F", lcd_preheat_fan_speed[i]);
SERIAL_ECHOPAIR(" M145 S1 H", preheatHotendTemp2); SERIAL_EOL;
SERIAL_ECHOPAIR(" B", preheatBedTemp2); }
SERIAL_ECHOPAIR(" F", preheatFanSpeed2);
SERIAL_EOL;
#endif // ULTIPANEL #endif // ULTIPANEL
#if HAS_PID_HEATING #if HAS_PID_HEATING

@ -43,8 +43,7 @@
#include "duration_t.h" #include "duration_t.h"
#endif #endif
int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1, int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2;
#if ENABLED(FILAMENT_LCD_DISPLAY) #if ENABLED(FILAMENT_LCD_DISPLAY)
millis_t previous_lcd_status_ms = 0; millis_t previous_lcd_status_ms = 0;
@ -887,29 +886,29 @@ void kill_screen(const char* lcd_msg) {
} }
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
void lcd_preheat_pla0() { _lcd_preheat(0, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } void lcd_preheat_pla0() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs0() { _lcd_preheat(0, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } void lcd_preheat_abs0() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif #endif
#if HOTENDS > 1 #if HOTENDS > 1
void lcd_preheat_pla1() { _lcd_preheat(1, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } void lcd_preheat_pla1() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs1() { _lcd_preheat(1, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } void lcd_preheat_abs1() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#if HOTENDS > 2 #if HOTENDS > 2
void lcd_preheat_pla2() { _lcd_preheat(2, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } void lcd_preheat_pla2() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs2() { _lcd_preheat(2, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } void lcd_preheat_abs2() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#if HOTENDS > 3 #if HOTENDS > 3
void lcd_preheat_pla3() { _lcd_preheat(3, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } void lcd_preheat_pla3() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs3() { _lcd_preheat(3, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } void lcd_preheat_abs3() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif #endif
#endif #endif
void lcd_preheat_pla0123() { void lcd_preheat_pla0123() {
#if HOTENDS > 1 #if HOTENDS > 1
thermalManager.setTargetHotend(preheatHotendTemp1, 1); thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 1);
#if HOTENDS > 2 #if HOTENDS > 2
thermalManager.setTargetHotend(preheatHotendTemp1, 2); thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 2);
#if HOTENDS > 3 #if HOTENDS > 3
thermalManager.setTargetHotend(preheatHotendTemp1, 3); thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 3);
#endif #endif
#endif #endif
#endif #endif
@ -917,11 +916,11 @@ void kill_screen(const char* lcd_msg) {
} }
void lcd_preheat_abs0123() { void lcd_preheat_abs0123() {
#if HOTENDS > 1 #if HOTENDS > 1
thermalManager.setTargetHotend(preheatHotendTemp2, 1); thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 1);
#if HOTENDS > 2 #if HOTENDS > 2
thermalManager.setTargetHotend(preheatHotendTemp2, 2); thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 2);
#if HOTENDS > 3 #if HOTENDS > 3
thermalManager.setTargetHotend(preheatHotendTemp2, 3); thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 3);
#endif #endif
#endif #endif
#endif #endif
@ -931,8 +930,8 @@ void kill_screen(const char* lcd_msg) {
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, preheatBedTemp1, preheatFanSpeed1); } void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, preheatBedTemp2, preheatFanSpeed2); } void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif #endif
#if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0) #if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0)
@ -1766,20 +1765,15 @@ void kill_screen(const char* lcd_msg) {
END_MENU(); END_MENU();
} }
/** static void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
*
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_TEMPERATURE); MENU_BACK(MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed1, 0, 255); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp1, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp1, BED_MINTEMP, BED_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
#endif #endif
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
@ -1787,26 +1781,19 @@ void kill_screen(const char* lcd_msg) {
END_MENU(); END_MENU();
} }
/**
*
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
/** /**
* *
* "Temperature" > "Preheat ABS conf" submenu * "Temperature" > "Preheat ABS conf" submenu
* *
*/ */
static void lcd_control_temperature_preheat_abs_settings_menu() { static void lcd_control_temperature_preheat_abs_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
START_MENU();
MENU_BACK(MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed2, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp2, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp2, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
static void _reset_acceleration_rates() { planner.reset_acceleration_rates(); } static void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
static void _planner_refresh_positioning() { planner.refresh_positioning(); } static void _planner_refresh_positioning() { planner.refresh_positioning(); }

@ -30,12 +30,7 @@
#define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0) #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0)
#define BUTTON_PRESSED(BN) !READ(BTN_## BN) #define BUTTON_PRESSED(BN) !READ(BTN_## BN)
extern int preheatHotendTemp1, extern int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
preheatBedTemp1,
preheatFanSpeed1,
preheatHotendTemp2,
preheatBedTemp2,
preheatFanSpeed2;
int lcd_strlen(const char* s); int lcd_strlen(const char* s);
int lcd_strlen_P(const char* s); int lcd_strlen_P(const char* s);

Loading…
Cancel
Save