Merge pull request #761 from Cylindric3D/localisation

Move strings in ultralcd.cpp into language.h.
master
nothinman 11 years ago
commit 1a6d21bb60

@ -71,6 +71,13 @@
#define MSG_EXTRUDE "Extrude" #define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract" #define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Move Axis" #define MSG_MOVE_AXIS "Move Axis"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Speed" #define MSG_SPEED "Speed"
#define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE1 "Nozzle2"
@ -140,6 +147,12 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
#define MSG_Enqueing "enqueing \"" #define MSG_Enqueing "enqueing \""
@ -211,6 +224,9 @@
#define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -236,6 +252,13 @@
#define MSG_EXTRUDE "Ekstruzja" #define MSG_EXTRUDE "Ekstruzja"
#define MSG_RETRACT "Cofanie" #define MSG_RETRACT "Cofanie"
#define MSG_MOVE_AXIS "Ruch osi" #define MSG_MOVE_AXIS "Ruch osi"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Predkosc" #define MSG_SPEED "Predkosc"
#define MSG_NOZZLE "Dysza" #define MSG_NOZZLE "Dysza"
#define MSG_NOZZLE1 "Dysza2" #define MSG_NOZZLE1 "Dysza2"
@ -308,6 +331,11 @@
#define MSG_ZPROBE_OUT "Probkuj Z poza lozem" #define MSG_ZPROBE_OUT "Probkuj Z poza lozem"
#define MSG_POSITION_UNKNOWN "Domuj X/Y przed Z" #define MSG_POSITION_UNKNOWN "Domuj X/Y przed Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -380,6 +408,9 @@
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -406,6 +437,13 @@
#define MSG_PREHEAT_PLA "Prechauffage PLA" #define MSG_PREHEAT_PLA "Prechauffage PLA"
#define MSG_PREHEAT_ABS "Prechauffage ABS" #define MSG_PREHEAT_ABS "Prechauffage ABS"
#define MSG_MOVE_AXIS "Deplacer un axe" #define MSG_MOVE_AXIS "Deplacer un axe"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED " Vitesse" #define MSG_SPEED " Vitesse"
#define MSG_NOZZLE "Buse" #define MSG_NOZZLE "Buse"
#define MSG_NOZZLE1 "Buse2" #define MSG_NOZZLE1 "Buse2"
@ -476,6 +514,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -548,6 +591,9 @@
#define MSG_ENDSTOPS_HIT "Fin de course atteint: " #define MSG_ENDSTOPS_HIT "Fin de course atteint: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -575,6 +621,13 @@
#define MSG_EXTRUDE "Extrude" #define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract" #define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Achsen bewegen" #define MSG_MOVE_AXIS "Achsen bewegen"
#define MSG_MOVE_X "X bewegen"
#define MSG_MOVE_Y "Y bewegen"
#define MSG_MOVE_Z "Z bewegen"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "0.1mm bewegen"
#define MSG_MOVE_1MM "1mm bewegen"
#define MSG_MOVE_10MM "10mm bewegen"
#define MSG_SPEED "Geschw" #define MSG_SPEED "Geschw"
#define MSG_NOZZLE "Düse" #define MSG_NOZZLE "Düse"
#define MSG_NOZZLE1 "Düse2" #define MSG_NOZZLE1 "Düse2"
@ -647,6 +700,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -719,6 +777,9 @@
#define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -744,6 +805,13 @@
#define MSG_EXTRUDE "Extruir" #define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer" #define MSG_RETRACT "Retraer"
#define MSG_MOVE_AXIS "Mover Ejes" #define MSG_MOVE_AXIS "Mover Ejes"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidad" #define MSG_SPEED "Velocidad"
#define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE1 "Nozzle2"
@ -822,6 +890,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -893,6 +966,9 @@
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -917,6 +993,13 @@
#define MSG_EXTRUDE " Экструзия " #define MSG_EXTRUDE " Экструзия "
#define MSG_RETRACT " Откат" #define MSG_RETRACT " Откат"
#define MSG_MOVE_AXIS " Движение по осям \x7E" #define MSG_MOVE_AXIS " Движение по осям \x7E"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED " Скорость:" #define MSG_SPEED " Скорость:"
#define MSG_NOZZLE " \002 Фильера:" #define MSG_NOZZLE " \002 Фильера:"
#define MSG_NOZZLE1 " \002 Фильера2:" #define MSG_NOZZLE1 " \002 Фильера2:"
@ -987,6 +1070,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -1057,6 +1145,9 @@
#define MSG_ENDSTOPS_HIT "концевик сработал: " #define MSG_ENDSTOPS_HIT "концевик сработал: "
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -1082,6 +1173,13 @@
#define MSG_EXTRUDE "Estrudi" #define MSG_EXTRUDE "Estrudi"
#define MSG_RETRACT "Ritrai" #define MSG_RETRACT "Ritrai"
#define MSG_MOVE_AXIS "Muovi Asse" #define MSG_MOVE_AXIS "Muovi Asse"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velcità" #define MSG_SPEED "Velcità"
#define MSG_NOZZLE "Ugello" #define MSG_NOZZLE "Ugello"
#define MSG_NOZZLE1 "Ugello2" #define MSG_NOZZLE1 "Ugello2"
@ -1152,6 +1250,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -1224,6 +1327,9 @@
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -1251,6 +1357,13 @@
#define MSG_PREHEAT_PLA " pre-aquecer PLA" #define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_MOVE_AXIS " Mover eixo \x7E" #define MSG_MOVE_AXIS " Mover eixo \x7E"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED " Velocidade:" #define MSG_SPEED " Velocidade:"
#define MSG_NOZZLE " \002Nozzle:" #define MSG_NOZZLE " \002Nozzle:"
#define MSG_NOZZLE1 " \002Nozzle2:" #define MSG_NOZZLE1 " \002Nozzle2:"
@ -1326,6 +1439,11 @@
#define MSG_ZPROBE_OUT "Sonda fora da mesa" #define MSG_ZPROBE_OUT "Sonda fora da mesa"
#define MSG_POSITION_UNKNOWN "Home X/Y antes de Z" #define MSG_POSITION_UNKNOWN "Home X/Y antes de Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -1398,7 +1516,9 @@
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
@ -1427,6 +1547,13 @@
#define MSG_EXTRUDE "Pursota" #define MSG_EXTRUDE "Pursota"
#define MSG_RETRACT "Veda takaisin" #define MSG_RETRACT "Veda takaisin"
#define MSG_MOVE_AXIS "Liikuta akseleita" #define MSG_MOVE_AXIS "Liikuta akseleita"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Nopeus" #define MSG_SPEED "Nopeus"
#define MSG_NOZZLE "Suutin" #define MSG_NOZZLE "Suutin"
#define MSG_NOZZLE1 "Suutin2" #define MSG_NOZZLE1 "Suutin2"
@ -1496,6 +1623,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -1568,6 +1700,11 @@
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
#endif #endif
@ -1592,6 +1729,13 @@
#define MSG_EXTRUDE "Extruir" #define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer" #define MSG_RETRACT "Retraer"
#define MSG_MOVE_AXIS "Mover Eixes" #define MSG_MOVE_AXIS "Mover Eixes"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidat" #define MSG_SPEED "Velocidat"
#define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE1 "Nozzle2"
@ -1670,6 +1814,11 @@
#define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages // Serial Console Messages
@ -1741,6 +1890,10 @@
#define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: " #define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: "
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada" #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada"
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#endif #endif
#endif // ifndef LANGUAGE_H #endif // ifndef LANGUAGE_H

@ -344,7 +344,7 @@ static void lcd_babystep_x()
} }
if (lcdDrawUpdate) if (lcdDrawUpdate)
{ {
lcd_implementation_drawedit(PSTR("Babystepping X"),""); lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_X),"");
} }
if (LCD_CLICKED) if (LCD_CLICKED)
{ {
@ -364,7 +364,7 @@ static void lcd_babystep_y()
} }
if (lcdDrawUpdate) if (lcdDrawUpdate)
{ {
lcd_implementation_drawedit(PSTR("Babystepping Y"),""); lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Y),"");
} }
if (LCD_CLICKED) if (LCD_CLICKED)
{ {
@ -384,7 +384,7 @@ static void lcd_babystep_z()
} }
if (lcdDrawUpdate) if (lcdDrawUpdate)
{ {
lcd_implementation_drawedit(PSTR("Babystepping Z"),""); lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Z),"");
} }
if (LCD_CLICKED) if (LCD_CLICKED)
{ {
@ -415,10 +415,10 @@ static void lcd_tune_menu()
#ifdef BABYSTEPPING #ifdef BABYSTEPPING
#ifdef BABYSTEP_XY #ifdef BABYSTEP_XY
MENU_ITEM(submenu, "Babystep X", lcd_babystep_x); MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x);
MENU_ITEM(submenu, "Babystep Y", lcd_babystep_y); MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y);
#endif //BABYSTEP_XY #endif //BABYSTEP_XY
MENU_ITEM(submenu, "Babystep Z", lcd_babystep_z); MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
#endif #endif
#ifdef FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600")); MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600"));
@ -573,12 +573,12 @@ static void lcd_move_menu_axis()
{ {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu); MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
MENU_ITEM(submenu, "Move X", lcd_move_x); MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
MENU_ITEM(submenu, "Move Y", lcd_move_y); MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
if (move_menu_scale < 10.0) if (move_menu_scale < 10.0)
{ {
MENU_ITEM(submenu, "Move Z", lcd_move_z); MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
MENU_ITEM(submenu, "Extruder", lcd_move_e); MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
} }
END_MENU(); END_MENU();
} }
@ -603,9 +603,9 @@ static void lcd_move_menu()
{ {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
MENU_ITEM(submenu, "Move 10mm", lcd_move_menu_10mm); MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
MENU_ITEM(submenu, "Move 1mm", lcd_move_menu_1mm); MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
MENU_ITEM(submenu, "Move 0.1mm", lcd_move_menu_01mm); MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
//TODO:X,Y,Z,E //TODO:X,Y,Z,E
END_MENU(); END_MENU();
} }
@ -727,7 +727,7 @@ static void lcd_control_motion_menu()
MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999); MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999);
MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999); MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999);
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
MENU_ITEM_EDIT(bool, "Endstop abort", &abort_on_endstop_hit); MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &abort_on_endstop_hit);
#endif #endif
END_MENU(); END_MENU();
} }
@ -746,7 +746,7 @@ static void lcd_set_contrast()
} }
if (lcdDrawUpdate) if (lcdDrawUpdate)
{ {
lcd_implementation_drawedit(PSTR("Contrast"), itostr2(lcd_contrast)); lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
} }
if (LCD_CLICKED) if (LCD_CLICKED)
{ {

Loading…
Cancel
Save