forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #1700 from thinkyhead/fixup_leveling

Browse Source 
Fixup leveling and other issues
master
Scott Lahteine 10 years ago
parent 7d472367e2 df02b992b0
commit 1aec2f437c
24 changed files with 361 additions and 343 deletions
Show Stats Download Patch File Download Diff File

6
Marlin/Configuration.h
Unescape View File

@ -532,9 +532,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -20
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX 20
#endif
#endif #endif

44
Marlin/ConfigurationStore.cpp
Unescape View File

@ -11,7 +11,7 @@
* max_acceleration_units_per_sq_second (x4) * max_acceleration_units_per_sq_second (x4)
* acceleration * acceleration
* retract_acceleration * retract_acceleration
* travel_aceeleration * travel_acceleration
* minimumfeedrate * minimumfeedrate
* mintravelfeedrate * mintravelfeedrate
* minsegmenttime * minsegmenttime
@ -25,6 +25,7 @@
* mesh_num_x * mesh_num_x
* mesh_num_y * mesh_num_y
* z_values[][] * z_values[][]
* zprobe_zoffset
* *
* DELTA: * DELTA:
* endstop_adj (x3) * endstop_adj (x3)
@ -39,7 +40,6 @@
* absPreheatHotendTemp * absPreheatHotendTemp
* absPreheatHPBTemp * absPreheatHPBTemp
* absPreheatFanSpeed * absPreheatFanSpeed
* zprobe_zoffset
* *
* PIDTEMP: * PIDTEMP:
* Kp[0], Ki[0], Kd[0], Kc[0] * Kp[0], Ki[0], Kd[0], Kc[0]
@ -118,7 +118,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
// wrong data being written to the variables. // wrong data being written to the variables.
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
#define EEPROM_VERSION "V17" #define EEPROM_VERSION "V18"
#ifdef EEPROM_SETTINGS #ifdef EEPROM_SETTINGS
@ -143,7 +143,7 @@ void Config_StoreSettings() {
uint8_t mesh_num_x = 3; uint8_t mesh_num_x = 3;
uint8_t mesh_num_y = 3; uint8_t mesh_num_y = 3;
#if defined(MESH_BED_LEVELING) #ifdef MESH_BED_LEVELING
// Compile time test that sizeof(mbl.z_values) is as expected // Compile time test that sizeof(mbl.z_values) is as expected
typedef char c_assert[(sizeof(mbl.z_values) == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS*sizeof(dummy)) ? 1 : -1]; typedef char c_assert[(sizeof(mbl.z_values) == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS*sizeof(dummy)) ? 1 : -1];
mesh_num_x = MESH_NUM_X_POINTS; mesh_num_x = MESH_NUM_X_POINTS;
@ -163,6 +163,11 @@ void Config_StoreSettings() {
} }
#endif // MESH_BED_LEVELING #endif // MESH_BED_LEVELING
#ifndef ENABLE_AUTO_BED_LEVELING
float zprobe_zoffset = 0;
#endif
EEPROM_WRITE_VAR(i, zprobe_zoffset);
#ifdef DELTA #ifdef DELTA
EEPROM_WRITE_VAR(i, endstop_adj); // 3 floats EEPROM_WRITE_VAR(i, endstop_adj); // 3 floats
EEPROM_WRITE_VAR(i, delta_radius); // 1 float EEPROM_WRITE_VAR(i, delta_radius); // 1 float
@ -188,7 +193,7 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, absPreheatHotendTemp); EEPROM_WRITE_VAR(i, absPreheatHotendTemp);
EEPROM_WRITE_VAR(i, absPreheatHPBTemp); EEPROM_WRITE_VAR(i, absPreheatHPBTemp);
EEPROM_WRITE_VAR(i, absPreheatFanSpeed); EEPROM_WRITE_VAR(i, absPreheatFanSpeed);
EEPROM_WRITE_VAR(i, zprobe_zoffset);
for (int e = 0; e < 4; e++) { for (int e = 0; e < 4; e++) {
@ -328,6 +333,11 @@ void Config_RetrieveSettings() {
} }
#endif // MESH_BED_LEVELING #endif // MESH_BED_LEVELING
#ifndef ENABLE_AUTO_BED_LEVELING
float zprobe_zoffset = 0;
#endif
EEPROM_READ_VAR(i, zprobe_zoffset);
#ifdef DELTA #ifdef DELTA
EEPROM_READ_VAR(i, endstop_adj); // 3 floats EEPROM_READ_VAR(i, endstop_adj); // 3 floats
EEPROM_READ_VAR(i, delta_radius); // 1 float EEPROM_READ_VAR(i, delta_radius); // 1 float
@ -353,7 +363,6 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, absPreheatHotendTemp); EEPROM_READ_VAR(i, absPreheatHotendTemp);
EEPROM_READ_VAR(i, absPreheatHPBTemp); EEPROM_READ_VAR(i, absPreheatHPBTemp);
EEPROM_READ_VAR(i, absPreheatFanSpeed); EEPROM_READ_VAR(i, absPreheatFanSpeed);
EEPROM_READ_VAR(i, zprobe_zoffset);
#ifdef PIDTEMP #ifdef PIDTEMP
for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin
@ -461,9 +470,13 @@ void Config_ResetDefault() {
max_e_jerk = DEFAULT_EJERK; max_e_jerk = DEFAULT_EJERK;
home_offset[X_AXIS] = home_offset[Y_AXIS] = home_offset[Z_AXIS] = 0; home_offset[X_AXIS] = home_offset[Y_AXIS] = home_offset[Z_AXIS] = 0;
#if defined(MESH_BED_LEVELING) #ifdef MESH_BED_LEVELING
mbl.active = 0; mbl.active = 0;
#endif // MESH_BED_LEVELING #endif
#ifdef ENABLE_AUTO_BED_LEVELING
zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
#endif
#ifdef DELTA #ifdef DELTA
endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0; endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0;
@ -484,10 +497,6 @@ void Config_ResetDefault() {
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
#endif #endif
#ifdef ENABLE_AUTO_BED_LEVELING
zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
#endif
#ifdef DOGLCD #ifdef DOGLCD
lcd_contrast = DEFAULT_LCD_CONTRAST; lcd_contrast = DEFAULT_LCD_CONTRAST;
#endif #endif
@ -738,15 +747,20 @@ void Config_PrintSettings(bool forReplay) {
} }
} }
#ifdef CUSTOM_M_CODES #ifdef ENABLE_AUTO_BED_LEVELING
SERIAL_ECHO_START; SERIAL_ECHO_START;
#ifdef CUSTOM_M_CODES
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); SERIAL_ECHOLNPGM("Z-Probe Offset (mm):");
SERIAL_ECHO_START; SERIAL_ECHO_START;
} }
SERIAL_ECHO(" M"); SERIAL_ECHOPAIR(" M", (unsigned long)CUSTOM_M_CODE_SET_Z_PROBE_OFFSET);
SERIAL_ECHO(CUSTOM_M_CODE_SET_Z_PROBE_OFFSET);
SERIAL_ECHOPAIR(" Z", -zprobe_zoffset); SERIAL_ECHOPAIR(" Z", -zprobe_zoffset);
#else
if (!forReplay) {
SERIAL_ECHOPAIR("Z-Probe Offset (mm):", -zprobe_zoffset);
}
#endif
SERIAL_EOL; SERIAL_EOL;
#endif #endif
} }

2
Marlin/Marlin.h
Unescape View File

@ -251,7 +251,9 @@ extern float z_endstop_adj;
extern float min_pos[3]; extern float min_pos[3];
extern float max_pos[3]; extern float max_pos[3];
extern bool axis_known_position[3]; extern bool axis_known_position[3];
#ifdef ENABLE_AUTO_BED_LEVELING
extern float zprobe_zoffset; extern float zprobe_zoffset;
#endif
extern int fanSpeed; extern int fanSpeed;
#ifdef BARICUDA #ifdef BARICUDA
extern int ValvePressure; extern int ValvePressure;

127
Marlin/Marlin_main.cpp
Unescape View File

@ -204,6 +204,7 @@
float homing_feedrate[] = HOMING_FEEDRATE; float homing_feedrate[] = HOMING_FEEDRATE;
#ifdef ENABLE_AUTO_BED_LEVELING #ifdef ENABLE_AUTO_BED_LEVELING
int xy_travel_speed = XY_TRAVEL_SPEED; int xy_travel_speed = XY_TRAVEL_SPEED;
float zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
#endif #endif
int homing_bump_divisor[] = HOMING_BUMP_DIVISOR; int homing_bump_divisor[] = HOMING_BUMP_DIVISOR;
bool axis_relative_modes[] = AXIS_RELATIVE_MODES; bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
@ -255,7 +256,6 @@ float home_offset[3] = { 0, 0, 0 };
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
bool axis_known_position[3] = { false, false, false }; bool axis_known_position[3] = { false, false, false };
float zprobe_zoffset;
// Extruder offset // Extruder offset
#if EXTRUDERS > 1 #if EXTRUDERS > 1
@ -1097,9 +1097,6 @@ static void set_bed_level_equation_lsq(double *plane_equation_coefficients)
current_position[Y_AXIS] = corrected_position.y; current_position[Y_AXIS] = corrected_position.y;
current_position[Z_AXIS] = corrected_position.z; current_position[Z_AXIS] = corrected_position.z;
// put the bed at 0 so we don't go below it.
current_position[Z_AXIS] = zprobe_zoffset; // in the lsq we reach here after raising the extruder due to the loop structure
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
} }
#endif #endif
@ -1113,11 +1110,13 @@ static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float
vector_3 pt1 = vector_3(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, z_at_pt_1); vector_3 pt1 = vector_3(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, z_at_pt_1);
vector_3 pt2 = vector_3(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, z_at_pt_2); vector_3 pt2 = vector_3(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, z_at_pt_2);
vector_3 pt3 = vector_3(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, z_at_pt_3); vector_3 pt3 = vector_3(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, z_at_pt_3);
vector_3 planeNormal = vector_3::cross(pt1 - pt2, pt3 - pt2).get_normal();
vector_3 from_2_to_1 = (pt1 - pt2).get_normal(); if (planeNormal.z < 0) {
vector_3 from_2_to_3 = (pt3 - pt2).get_normal(); planeNormal.x = -planeNormal.x;
vector_3 planeNormal = vector_3::cross(from_2_to_1, from_2_to_3).get_normal(); planeNormal.y = -planeNormal.y;
planeNormal = vector_3(planeNormal.x, planeNormal.y, abs(planeNormal.z)); planeNormal.z = -planeNormal.z;
}
plan_bed_level_matrix = matrix_3x3::create_look_at(planeNormal); plan_bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
@ -1126,11 +1125,7 @@ static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float
current_position[Y_AXIS] = corrected_position.y; current_position[Y_AXIS] = corrected_position.y;
current_position[Z_AXIS] = corrected_position.z; current_position[Z_AXIS] = corrected_position.z;
// put the bed at 0 so we don't go below it.
current_position[Z_AXIS] = zprobe_zoffset;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
} }
#endif // AUTO_BED_LEVELING_GRID #endif // AUTO_BED_LEVELING_GRID
@ -2017,8 +2012,19 @@ inline void gcode_G28() {
endstops_hit_on_purpose(); endstops_hit_on_purpose();
} }
#if defined(MESH_BED_LEVELING) #ifdef MESH_BED_LEVELING
/**
* G29: Mesh-based Z-Probe, probes a grid and produces a
* mesh to compensate for variable bed height
*
* Parameters With MESH_BED_LEVELING:
*
* S0 Produce a mesh report
* S1 Start probing mesh points
* S2 Probe the next mesh point
*
*/
inline void gcode_G29() { inline void gcode_G29() {
static int probe_point = -1; static int probe_point = -1;
int state = 0; int state = 0;
@ -2060,7 +2066,7 @@ inline void gcode_G28() {
} else if (state == 2) { // Goto next point } else if (state == 2) { // Goto next point
if (probe_point < 0) { if (probe_point < 0) {
SERIAL_PROTOCOLPGM("Mesh probing not started.\n"); SERIAL_PROTOCOLPGM("Start mesh probing with \"G29 S1\" first.\n");
return; return;
} }
int ix, iy; int ix, iy;
@ -2070,16 +2076,14 @@ inline void gcode_G28() {
} else { } else {
ix = (probe_point-1) % MESH_NUM_X_POINTS; ix = (probe_point-1) % MESH_NUM_X_POINTS;
iy = (probe_point-1) / MESH_NUM_X_POINTS; iy = (probe_point-1) / MESH_NUM_X_POINTS;
if (iy&1) { // Zig zag if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag
ix = (MESH_NUM_X_POINTS - 1) - ix;
}
mbl.set_z(ix, iy, current_position[Z_AXIS]); mbl.set_z(ix, iy, current_position[Z_AXIS]);
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z; current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
st_synchronize(); st_synchronize();
} }
if (probe_point == MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS) { if (probe_point == MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS) {
SERIAL_PROTOCOLPGM("Mesh done.\n"); SERIAL_PROTOCOLPGM("Mesh probing done.\n");
probe_point = -1; probe_point = -1;
mbl.active = 1; mbl.active = 1;
enquecommands_P(PSTR("G28")); enquecommands_P(PSTR("G28"));
@ -2087,9 +2091,7 @@ inline void gcode_G28() {
} }
ix = probe_point % MESH_NUM_X_POINTS; ix = probe_point % MESH_NUM_X_POINTS;
iy = probe_point / MESH_NUM_X_POINTS; iy = probe_point / MESH_NUM_X_POINTS;
if (iy&1) { // Zig zag if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag
ix = (MESH_NUM_X_POINTS - 1) - ix;
}
current_position[X_AXIS] = mbl.get_x(ix); current_position[X_AXIS] = mbl.get_x(ix);
current_position[Y_AXIS] = mbl.get_y(iy); current_position[Y_AXIS] = mbl.get_y(iy);
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
@ -2098,9 +2100,7 @@ inline void gcode_G28() {
} }
} }
#endif #elif defined(ENABLE_AUTO_BED_LEVELING)
#ifdef ENABLE_AUTO_BED_LEVELING
/** /**
* G29: Detailed Z-Probe, probes the bed at 3 or more points. * G29: Detailed Z-Probe, probes the bed at 3 or more points.
@ -2116,8 +2116,9 @@ inline void gcode_G28() {
* *
* S Set the XY travel speed between probe points (in mm/min) * S Set the XY travel speed between probe points (in mm/min)
* *
* D Dry-Run mode. Just evaluate the bed Topology - It does not apply or clean the rotation Matrix * D Dry-Run mode. Just evaluate the bed Topology - Don't apply
* Useful to check the topology after a first run of G29. * or clean the rotation Matrix. Useful to check the topology
* after a first run of G29.
* *
* V Set the verbose level (0-4). Example: "G29 V3" * V Set the verbose level (0-4). Example: "G29 V3"
* *
@ -2224,7 +2225,7 @@ inline void gcode_G28() {
#ifdef Z_PROBE_SLED #ifdef Z_PROBE_SLED
dock_sled(false); // engage (un-dock) the probe dock_sled(false); // engage (un-dock) the probe
#elif defined(Z_PROBE_ALLEN_KEY) #elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING)
engage_z_probe(); engage_z_probe();
#endif #endif
@ -2234,7 +2235,7 @@ inline void gcode_G28() {
{ {
#ifdef DELTA #ifdef DELTA
reset_bed_level(); reset_bed_level();
#else #else //!DELTA
// make sure the bed_level_rotation_matrix is identity or the planner will get it incorectly // make sure the bed_level_rotation_matrix is identity or the planner will get it incorectly
//vector_3 corrected_position = plan_get_position_mm(); //vector_3 corrected_position = plan_get_position_mm();
@ -2242,7 +2243,6 @@ inline void gcode_G28() {
plan_bed_level_matrix.set_to_identity(); plan_bed_level_matrix.set_to_identity();
vector_3 uncorrected_position = plan_get_position(); vector_3 uncorrected_position = plan_get_position();
//uncorrected_position.debug("position during G29"); //uncorrected_position.debug("position during G29");
current_position[X_AXIS] = uncorrected_position.x; current_position[X_AXIS] = uncorrected_position.x;
current_position[Y_AXIS] = uncorrected_position.y; current_position[Y_AXIS] = uncorrected_position.y;
current_position[Z_AXIS] = uncorrected_position.z; current_position[Z_AXIS] = uncorrected_position.z;
@ -2261,7 +2261,12 @@ inline void gcode_G28() {
const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points-1); const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points-1);
const int yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points-1); const int yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points-1);
#ifndef DELTA #ifdef DELTA
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
float z_offset = Z_PROBE_OFFSET_FROM_EXTRUDER;
if (code_seen(axis_codes[Z_AXIS])) z_offset += code_value();
#else // !DELTA
// solve the plane equation ax + by + d = z // solve the plane equation ax + by + d = z
// A is the matrix with rows [x y 1] for all the probed points // A is the matrix with rows [x y 1] for all the probed points
// B is the vector of the Z positions // B is the vector of the Z positions
@ -2273,14 +2278,7 @@ inline void gcode_G28() {
double eqnAMatrix[abl2 * 3], // "A" matrix of the linear system of equations double eqnAMatrix[abl2 * 3], // "A" matrix of the linear system of equations
eqnBVector[abl2], // "B" vector of Z points eqnBVector[abl2], // "B" vector of Z points
mean = 0.0; mean = 0.0;
#endif // !DELTA
#else
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
float z_offset = Z_PROBE_OFFSET_FROM_EXTRUDER;
if (code_seen(axis_codes[Z_AXIS])) z_offset += code_value();
#endif
int probePointCounter = 0; int probePointCounter = 0;
bool zig = true; bool zig = true;
@ -2352,7 +2350,13 @@ inline void gcode_G28() {
clean_up_after_endstop_move(); clean_up_after_endstop_move();
#ifndef DELTA #ifdef DELTA
if (!dryrun) extrapolate_unprobed_bed_level();
print_bed_level();
#else // !DELTA
// solve lsq problem // solve lsq problem
double *plane_equation_coefficients = qr_solve(abl2, 3, eqnAMatrix, eqnBVector); double *plane_equation_coefficients = qr_solve(abl2, 3, eqnAMatrix, eqnBVector);
@ -2402,10 +2406,8 @@ inline void gcode_G28() {
if (!dryrun) set_bed_level_equation_lsq(plane_equation_coefficients); if (!dryrun) set_bed_level_equation_lsq(plane_equation_coefficients);
free(plane_equation_coefficients); free(plane_equation_coefficients);
#else //Delta
if (!dryrun) extrapolate_unprobed_bed_level(); #endif //!DELTA
print_bed_level();
#endif //Delta
#else // !AUTO_BED_LEVELING_GRID #else // !AUTO_BED_LEVELING_GRID
@ -2429,7 +2431,8 @@ inline void gcode_G28() {
#endif // !AUTO_BED_LEVELING_GRID #endif // !AUTO_BED_LEVELING_GRID
#ifndef DELTA #ifndef DELTA
if (verbose_level > 0) plan_bed_level_matrix.debug(" \n\nBed Level Correction Matrix:"); if (verbose_level > 0)
plan_bed_level_matrix.debug(" \n\nBed Level Correction Matrix:");
// Correct the Z height difference from z-probe position and hotend tip position. // Correct the Z height difference from z-probe position and hotend tip position.
// The Z height on homing is measured by Z-Probe, but the probe is quite far from the hotend. // The Z height on homing is measured by Z-Probe, but the probe is quite far from the hotend.
@ -2445,11 +2448,11 @@ inline void gcode_G28() {
current_position[Z_AXIS] = z_tmp - real_z + current_position[Z_AXIS]; //The difference is added to current position and sent to planner. current_position[Z_AXIS] = z_tmp - real_z + current_position[Z_AXIS]; //The difference is added to current position and sent to planner.
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
} }
#endif #endif // !DELTA
#ifdef Z_PROBE_SLED #ifdef Z_PROBE_SLED
dock_sled(true, -SLED_DOCKING_OFFSET); // dock the probe, correcting for over-travel dock_sled(true, -SLED_DOCKING_OFFSET); // dock the probe, correcting for over-travel
#elif defined(Z_PROBE_ALLEN_KEY) #elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING)
retract_z_probe(); retract_z_probe();
#endif #endif
@ -2919,7 +2922,7 @@ inline void gcode_M42() {
do_blocking_move_to( X_probe_location, Y_probe_location, Z_start_location); // Make sure we are at the probe location do_blocking_move_to( X_probe_location, Y_probe_location, Z_start_location); // Make sure we are at the probe location
if (n_legs) { if (n_legs) {
double radius=0.0, theta=0.0, x_sweep, y_sweep; double radius=0.0, theta=0.0;
int l; int l;
int rotational_direction = (unsigned long) millis() & 0x0001; // clockwise or counter clockwise int rotational_direction = (unsigned long) millis() & 0x0001; // clockwise or counter clockwise
radius = (unsigned long)millis() % (long)(X_MAX_LENGTH / 4); // limit how far out to go radius = (unsigned long)millis() % (long)(X_MAX_LENGTH / 4); // limit how far out to go
@ -3545,7 +3548,6 @@ inline void gcode_M200() {
} }
} }
float area = .0;
if (code_seen('D')) { if (code_seen('D')) {
float diameter = code_value(); float diameter = code_value();
// setting any extruder filament size disables volumetric on the assumption that // setting any extruder filament size disables volumetric on the assumption that
@ -4283,7 +4285,7 @@ inline void gcode_M502() {
* M503: print settings currently in memory * M503: print settings currently in memory
*/ */
inline void gcode_M503() { inline void gcode_M503() {
Config_PrintSettings(code_seen('S') && code_value == 0); Config_PrintSettings(code_seen('S') && code_value() == 0);
} }
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
@ -4580,9 +4582,14 @@ inline void gcode_T() {
SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
} }
else { else {
boolean make_move = false; #if EXTRUDERS > 1
bool make_move = false;
#endif
if (code_seen('F')) { if (code_seen('F')) {
#if EXTRUDERS > 1
make_move = true; make_move = true;
#endif
next_feedrate = code_value(); next_feedrate = code_value();
if (next_feedrate > 0.0) feedrate = next_feedrate; if (next_feedrate > 0.0) feedrate = next_feedrate;
} }
@ -5179,16 +5186,18 @@ void ClearToSend()
SERIAL_PROTOCOLLNPGM(MSG_OK); SERIAL_PROTOCOLLNPGM(MSG_OK);
} }
void get_coordinates() void get_coordinates() {
{ for (int i = 0; i < NUM_AXIS; i++) {
bool seen[4]={false,false,false,false}; float dest;
for(int8_t i=0; i < NUM_AXIS; i++) { if (code_seen(axis_codes[i])) {
if(code_seen(axis_codes[i])) dest = code_value();
{ if (axis_relative_modes[i] || relative_mode)
destination[i] = (float)code_value() + (axis_relative_modes[i] || relative_mode)*current_position[i]; dest += current_position[i];
seen[i]=true;
} }
else destination[i] = current_position[i]; //Are these else lines really needed? else
dest = current_position[i];
destination[i] = dest;
} }
if (code_seen('F')) { if (code_seen('F')) {
next_feedrate = code_value(); next_feedrate = code_value();

8
Marlin/SanityCheck.h
Unescape View File

@ -104,13 +104,13 @@
// Make sure probing points are reachable // Make sure probing points are reachable
#if LEFT_PROBE_BED_POSITION < MIN_PROBE_X #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
#error The given LEFT_PROBE_BED_POSITION can not be reached by the probe. #error "The given LEFT_PROBE_BED_POSITION can't be reached by the probe."
#elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
#error The given RIGHT_PROBE_BED_POSITION can not be reached by the probe. #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the probe."
#elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
#error The given FRONT_PROBE_BED_POSITION can not be reached by the probe. #error "The given FRONT_PROBE_BED_POSITION can't be reached by the probe."
#elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
#error The given BACK_PROBE_BED_POSITION can not be reached by the probe. #error "The given BACK_PROBE_BED_POSITION can't be reached by the probe."
#endif #endif
#define PROBE_SIZE_X (X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) #define PROBE_SIZE_X (X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1))

2
Marlin/configurator/config/Configuration.h
Unescape View File

@ -569,10 +569,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// @section extras // @section extras

2
Marlin/example_configurations/Felix/Configuration.h
Unescape View File

@ -511,10 +511,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/Felix/Configuration_DUAL.h
Unescape View File

@ -511,10 +511,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/Hephestos/Configuration.h
Unescape View File

@ -539,10 +539,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/K8200/Configuration.h
Unescape View File

@ -543,10 +543,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -569,10 +569,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
//#define CUSTOM_M_CODES //#define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/WITBOX/Configuration.h
Unescape View File

@ -536,10 +536,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/delta/generic/Configuration.h
Unescape View File

@ -552,10 +552,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape View File

@ -554,10 +554,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -534,10 +534,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

2
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -541,10 +541,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// Custom M code points // Custom M code points
#define CUSTOM_M_CODES #define CUSTOM_M_CODES
#ifdef CUSTOM_M_CODES #ifdef CUSTOM_M_CODES
#ifdef ENABLE_AUTO_BED_LEVELING
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX -5
#endif #endif
#endif
// EEPROM // EEPROM

14
Marlin/mesh_bed_leveling.cpp
Unescape View File

@ -1,20 +1,16 @@
#include "mesh_bed_leveling.h" #include "mesh_bed_leveling.h"
#if defined(MESH_BED_LEVELING) #ifdef MESH_BED_LEVELING
mesh_bed_leveling mbl; mesh_bed_leveling mbl;
mesh_bed_leveling::mesh_bed_leveling() { mesh_bed_leveling::mesh_bed_leveling() { reset(); }
reset();
}
void mesh_bed_leveling::reset() { void mesh_bed_leveling::reset() {
for (int y=0; y<MESH_NUM_Y_POINTS; y++) {
for (int x=0; x<MESH_NUM_X_POINTS; x++) {
z_values[y][x] = 0;
}
}
active = 0; active = 0;
for (int y = 0; y < MESH_NUM_Y_POINTS; y++)
for (int x = 0; x < MESH_NUM_X_POINTS; x++)
z_values[y][x] = 0;
} }
#endif // MESH_BED_LEVELING #endif // MESH_BED_LEVELING

8
Marlin/mesh_bed_leveling.h
Unescape View File

@ -20,17 +20,13 @@ public:
int select_x_index(float x) { int select_x_index(float x) {
int i = 1; int i = 1;
while (x > get_x(i) && i < MESH_NUM_X_POINTS-1) { while (x > get_x(i) && i < MESH_NUM_X_POINTS-1) i++;
i++;
}
return i - 1; return i - 1;
} }
int select_y_index(float y) { int select_y_index(float y) {
int i = 1; int i = 1;
while (y > get_y(i) && i < MESH_NUM_Y_POINTS-1) { while (y > get_y(i) && i < MESH_NUM_Y_POINTS - 1) i++;
i++;
}
return i - 1; return i - 1;
} }

6
Marlin/stepper.cpp
Unescape View File

@ -1176,8 +1176,6 @@ void digipot_current(uint8_t driver, int current) {
} }
void microstep_init() { void microstep_init() {
const uint8_t microstep_modes[] = MICROSTEP_MODES;
#if defined(E1_MS1_PIN) && E1_MS1_PIN >= 0 #if defined(E1_MS1_PIN) && E1_MS1_PIN >= 0
pinMode(E1_MS1_PIN,OUTPUT); pinMode(E1_MS1_PIN,OUTPUT);
pinMode(E1_MS2_PIN,OUTPUT); pinMode(E1_MS2_PIN,OUTPUT);
@ -1192,7 +1190,9 @@ void microstep_init() {
pinMode(Z_MS2_PIN,OUTPUT); pinMode(Z_MS2_PIN,OUTPUT);
pinMode(E0_MS1_PIN,OUTPUT); pinMode(E0_MS1_PIN,OUTPUT);
pinMode(E0_MS2_PIN,OUTPUT); pinMode(E0_MS2_PIN,OUTPUT);
for (int i = 0; i <= 4; i++) microstep_mode(i, microstep_modes[i]); const uint8_t microstep_modes[] = MICROSTEP_MODES;
for (int i = 0; i < sizeof(microstep_modes) / sizeof(microstep_modes[0]); i++)
microstep_mode(i, microstep_modes[i]);
#endif #endif
} }

5
Marlin/temperature.cpp
Unescape View File

@ -1181,9 +1181,10 @@ static void set_current_temp_raw() {
#endif #endif
#if HAS_TEMP_1 #if HAS_TEMP_1
#ifdef TEMP_SENSOR_1_AS_REDUNDANT #ifdef TEMP_SENSOR_1_AS_REDUNDANT
redundant_temperature_raw = redundant_temperature_raw = raw_temp_value[1];
#endif #else
current_temperature_raw[1] = raw_temp_value[1]; current_temperature_raw[1] = raw_temp_value[1];
#endif
#if HAS_TEMP_2 #if HAS_TEMP_2
current_temperature_raw[2] = raw_temp_value[2]; current_temperature_raw[2] = raw_temp_value[2];
#if HAS_TEMP_3 #if HAS_TEMP_3

6
Marlin/temperature.h
Unescape View File

@ -41,10 +41,10 @@ void manage_heater(); //it is critical that this is called periodically.
// low level conversion routines // low level conversion routines
// do not use these routines and variables outside of temperature.cpp // do not use these routines and variables outside of temperature.cpp
extern int target_temperature[EXTRUDERS]; extern int target_temperature[4];
extern float current_temperature[EXTRUDERS]; extern float current_temperature[4];
#ifdef SHOW_TEMP_ADC_VALUES #ifdef SHOW_TEMP_ADC_VALUES
extern int current_temperature_raw[EXTRUDERS]; extern int current_temperature_raw[4];
extern int current_temperature_bed_raw; extern int current_temperature_bed_raw;
#endif #endif
extern int target_temperature_bed; extern int target_temperature_bed;

2
Marlin/ultralcd.cpp
Unescape View File

@ -911,7 +911,7 @@ static void lcd_control_motion_menu() {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
#ifdef ENABLE_AUTO_BED_LEVELING #ifdef ENABLE_AUTO_BED_LEVELING
MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.0, 50); MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#endif #endif
MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 10, 99000); MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 10, 99000);
MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990); MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990);

56
Marlin/vector_3.cpp
Unescape View File

@ -26,57 +26,40 @@ vector_3::vector_3() : x(0), y(0), z(0) { }
vector_3::vector_3(float x_, float y_, float z_) : x(x_), y(y_), z(z_) { } vector_3::vector_3(float x_, float y_, float z_) : x(x_), y(y_), z(z_) { }
vector_3 vector_3::cross(vector_3 left, vector_3 right) vector_3 vector_3::cross(vector_3 left, vector_3 right) {
{
return vector_3(left.y * right.z - left.z * right.y, return vector_3(left.y * right.z - left.z * right.y,
left.z * right.x - left.x * right.z, left.z * right.x - left.x * right.z,
left.x * right.y - left.y * right.x); left.x * right.y - left.y * right.x);
} }
vector_3 vector_3::operator+(vector_3 v) vector_3 vector_3::operator+(vector_3 v) { return vector_3((x + v.x), (y + v.y), (z + v.z)); }
{ vector_3 vector_3::operator-(vector_3 v) { return vector_3((x - v.x), (y - v.y), (z - v.z)); }
return vector_3((x + v.x), (y + v.y), (z + v.z));
}
vector_3 vector_3::operator-(vector_3 v)
{
return vector_3((x - v.x), (y - v.y), (z - v.z));
}
vector_3 vector_3::get_normal() vector_3 vector_3::get_normal() {
{
vector_3 normalized = vector_3(x, y, z); vector_3 normalized = vector_3(x, y, z);
normalized.normalize(); normalized.normalize();
return normalized; return normalized;
} }
float vector_3::get_length() float vector_3::get_length() { return sqrt((x * x) + (y * y) + (z * z)); }
{
float length = sqrt((x * x) + (y * y) + (z * z));
return length;
}
void vector_3::normalize() void vector_3::normalize() {
{
float length = get_length(); float length = get_length();
x /= length; x /= length;
y /= length; y /= length;
z /= length; z /= length;
} }
void vector_3::apply_rotation(matrix_3x3 matrix) void vector_3::apply_rotation(matrix_3x3 matrix) {
{
float resultX = x * matrix.matrix[3*0+0] + y * matrix.matrix[3*1+0] + z * matrix.matrix[3*2+0]; float resultX = x * matrix.matrix[3*0+0] + y * matrix.matrix[3*1+0] + z * matrix.matrix[3*2+0];
float resultY = x * matrix.matrix[3*0+1] + y * matrix.matrix[3*1+1] + z * matrix.matrix[3*2+1]; float resultY = x * matrix.matrix[3*0+1] + y * matrix.matrix[3*1+1] + z * matrix.matrix[3*2+1];
float resultZ = x * matrix.matrix[3*0+2] + y * matrix.matrix[3*1+2] + z * matrix.matrix[3*2+2]; float resultZ = x * matrix.matrix[3*0+2] + y * matrix.matrix[3*1+2] + z * matrix.matrix[3*2+2];
x = resultX; x = resultX;
y = resultY; y = resultY;
z = resultZ; z = resultZ;
} }
void vector_3::debug(char* title) void vector_3::debug(const char title[]) {
{
SERIAL_PROTOCOL(title); SERIAL_PROTOCOL(title);
SERIAL_PROTOCOLPGM(" x: "); SERIAL_PROTOCOLPGM(" x: ");
SERIAL_PROTOCOL_F(x, 6); SERIAL_PROTOCOL_F(x, 6);
@ -87,8 +70,7 @@ void vector_3::debug(char* title)
SERIAL_EOL; SERIAL_EOL;
} }
void apply_rotation_xyz(matrix_3x3 matrix, float &x, float& y, float& z) void apply_rotation_xyz(matrix_3x3 matrix, float &x, float& y, float& z) {
{
vector_3 vector = vector_3(x, y, z); vector_3 vector = vector_3(x, y, z);
vector.apply_rotation(matrix); vector.apply_rotation(matrix);
x = vector.x; x = vector.x;
@ -96,8 +78,7 @@ void apply_rotation_xyz(matrix_3x3 matrix, float &x, float& y, float& z)
z = vector.z; z = vector.z;
} }
matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2) matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2) {
{
//row_0.debug("row_0"); //row_0.debug("row_0");
//row_1.debug("row_1"); //row_1.debug("row_1");
//row_2.debug("row_2"); //row_2.debug("row_2");
@ -106,19 +87,16 @@ matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3
new_matrix.matrix[3] = row_1.x; new_matrix.matrix[4] = row_1.y; new_matrix.matrix[5] = row_1.z; new_matrix.matrix[3] = row_1.x; new_matrix.matrix[4] = row_1.y; new_matrix.matrix[5] = row_1.z;
new_matrix.matrix[6] = row_2.x; new_matrix.matrix[7] = row_2.y; new_matrix.matrix[8] = row_2.z; new_matrix.matrix[6] = row_2.x; new_matrix.matrix[7] = row_2.y; new_matrix.matrix[8] = row_2.z;
//new_matrix.debug("new_matrix"); //new_matrix.debug("new_matrix");
return new_matrix; return new_matrix;
} }
void matrix_3x3::set_to_identity() void matrix_3x3::set_to_identity() {
{
matrix[0] = 1; matrix[1] = 0; matrix[2] = 0; matrix[0] = 1; matrix[1] = 0; matrix[2] = 0;
matrix[3] = 0; matrix[4] = 1; matrix[5] = 0; matrix[3] = 0; matrix[4] = 1; matrix[5] = 0;
matrix[6] = 0; matrix[7] = 0; matrix[8] = 1; matrix[6] = 0; matrix[7] = 0; matrix[8] = 1;
} }
matrix_3x3 matrix_3x3::create_look_at(vector_3 target) matrix_3x3 matrix_3x3::create_look_at(vector_3 target) {
{
vector_3 z_row = target.get_normal(); vector_3 z_row = target.get_normal();
vector_3 x_row = vector_3(1, 0, -target.x/target.z).get_normal(); vector_3 x_row = vector_3(1, 0, -target.x/target.z).get_normal();
vector_3 y_row = vector_3::cross(z_row, x_row).get_normal(); vector_3 y_row = vector_3::cross(z_row, x_row).get_normal();
@ -127,7 +105,6 @@ matrix_3x3 matrix_3x3::create_look_at(vector_3 target)
// y_row.debug("y_row"); // y_row.debug("y_row");
// z_row.debug("z_row"); // z_row.debug("z_row");
// create the matrix already correctly transposed // create the matrix already correctly transposed
matrix_3x3 rot = matrix_3x3::create_from_rows(x_row, y_row, z_row); matrix_3x3 rot = matrix_3x3::create_from_rows(x_row, y_row, z_row);
@ -135,9 +112,7 @@ matrix_3x3 matrix_3x3::create_look_at(vector_3 target)
return rot; return rot;
} }
matrix_3x3 matrix_3x3::transpose(matrix_3x3 original) {
matrix_3x3 matrix_3x3::transpose(matrix_3x3 original)
{
matrix_3x3 new_matrix; matrix_3x3 new_matrix;
new_matrix.matrix[0] = original.matrix[0]; new_matrix.matrix[1] = original.matrix[3]; new_matrix.matrix[2] = original.matrix[6]; new_matrix.matrix[0] = original.matrix[0]; new_matrix.matrix[1] = original.matrix[3]; new_matrix.matrix[2] = original.matrix[6];
new_matrix.matrix[3] = original.matrix[1]; new_matrix.matrix[4] = original.matrix[4]; new_matrix.matrix[5] = original.matrix[7]; new_matrix.matrix[3] = original.matrix[1]; new_matrix.matrix[4] = original.matrix[4]; new_matrix.matrix[5] = original.matrix[7];
@ -145,11 +120,12 @@ matrix_3x3 matrix_3x3::transpose(matrix_3x3 original)
return new_matrix; return new_matrix;
} }
void matrix_3x3::debug(char* title) { void matrix_3x3::debug(const char title[]) {
SERIAL_PROTOCOLLN(title); SERIAL_PROTOCOLLN(title);
int count = 0; int count = 0;
for(int i=0; i<3; i++) { for(int i=0; i<3; i++) {
for(int j=0; j<3; j++) { for(int j=0; j<3; j++) {
if (matrix[count] >= 0.0) SERIAL_PROTOCOLPGM("+");
SERIAL_PROTOCOL_F(matrix[count], 6); SERIAL_PROTOCOL_F(matrix[count], 6);
SERIAL_PROTOCOLPGM(" "); SERIAL_PROTOCOLPGM(" ");
count++; count++;
@ -158,5 +134,5 @@ void matrix_3x3::debug(char* title) {
} }
} }
#endif // #ifdef ENABLE_AUTO_BED_LEVELING #endif // ENABLE_AUTO_BED_LEVELING

4
Marlin/vector_3.h
Unescape View File

@ -37,7 +37,7 @@ struct vector_3
float get_length(); float get_length();
vector_3 get_normal(); vector_3 get_normal();
void debug(char* title); void debug(const char title[]);
void apply_rotation(matrix_3x3 matrix); void apply_rotation(matrix_3x3 matrix);
}; };
@ -52,7 +52,7 @@ struct matrix_3x3
void set_to_identity(); void set_to_identity();
void debug(char* title); void debug(const char title[]);
}; };

Write Preview
Loading…
Cancel
Save