Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants

master
Scott Lahteine 9 years ago
parent 2512d8fd5e
commit 1da9d10173

@ -83,6 +83,8 @@
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
#define BOARD_LEAPFROG 999 // Leapfrog
#define BOARD_MKS_BASE 40 // MKS BASE 1.0
#define BOARD_MKS_13 47 // MKS v1.3 or 1.4 (maybe higher)
#define BOARD_SAINSMART_2IN1 49 // Sainsmart 2-in-1 board
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D

@ -149,6 +149,10 @@
#include "pins_99.h"
#elif MB(AJ4P)
#include "pins_AJ4P.h"
#elif MB(MKS_13)
#include "pins_MKS_13.h"
#elif MB(BOARD_SAINSMART_2IN1)
#include "pins_SAINSMART_2IN1.h"
#else
#error Unknown MOTHERBOARD value set in Configuration.h
#endif

@ -0,0 +1,35 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.4 adjusted pin assignments
*
* MKS v1.3 (Extruder, Fan, Bed)
* MKS v1.3 (Extruder, Extruder, Fan, Bed)
* MKS v1.4 (Extruder, Fan, Bed)
* MKS v1.4 (Extruder, Extruder, Fan, Bed)
*/
#include "pins_RAMPS_14_EFB.h"
#undef HEATER_1_PIN
#define HEATER_1_PIN 7 // EXTRUDER 2 (-1 on RAMPS 1.4)

@ -0,0 +1,36 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Sainsmart 2-in-1 pin assignments
*/
#include "pins_RAMPS_14_EFB.h"
#undef FAN_PIN
#define FAN_PIN 7 // PART FAN in front of board next to Extruder heat
#undef HEATER_0_PIN
#define HEATER_0_PIN 9 // EXTRUDER 1
#undef HEATER_1_PIN
#define HEATER_1_PIN 10 // EXTRUDER 2
Loading…
Cancel
Save