Fixups for 1.1.8

Marlin/Marlin_main.cpp

@@ -8445,6 +8445,7 @@ inline void gcode_M114() {
   static void cap_line(const char * const name, bool ena=false) {
     SERIAL_PROTOCOLPGM("Cap:");
     serialprintPGM(name);
+    SERIAL_PROTOCOLPGM(":");
     SERIAL_PROTOCOLLN(int(ena ? 1 : 0));
   }
 #endif
@@ -13202,7 +13203,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
         planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder);
         oldA = delta[A_AXIS]; oldB = delta[B_AXIS];
       #else
-        planner.buffer_line(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], _feedrate_mm_s, active_extruder);
+        planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], _feedrate_mm_s, active_extruder);
       #endif
     }
 

Marlin/configuration_store.cpp

@@ -240,6 +240,9 @@ void MarlinSettings::postprocess() {
 
   #if DISABLED(NO_VOLUMETRICS)
     planner.calculate_volumetric_multipliers();
+  #else
+    for (uint8_t i = COUNT(planner.e_factor); i--;)
+      planner.refresh_e_factor(i);
   #endif
 
   #if HAS_HOME_OFFSET || ENABLED(DUAL_X_CARRIAGE)

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -1174,7 +1174,7 @@
  *    P1  Raise the nozzle always to Z-park height.
  *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  */
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }

Marlin/planner.cpp

@@ -94,7 +94,7 @@ float Planner::max_feedrate_mm_s[XYZE_N], // Max speeds in mm per second
 
 int16_t Planner::flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); // Extrusion factor for each extruder
 
-float Planner::e_factor[EXTRUDERS];               // The flow percentage and volumetric multiplier combine to scale E movement
+float Planner::e_factor[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0); // The flow percentage and volumetric multiplier combine to scale E movement
 
 #if DISABLED(NO_VOLUMETRICS)
   float Planner::filament_size[EXTRUDERS],          // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder