Wrap Dual Y options in a conditional

9 years ago · 28599c51c7
parent 11a065c0ca
commit 28599c51c7
14 changed files with 56 additions and 28 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -157,8 +157,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/configurator/config/Configuration_adv.h
+++ b/Marlin/configurator/config/Configuration_adv.h
@ -157,8 +157,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -157,8 +157,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -165,8 +165,10 @@
 // Same again but for Y Axis.
 //#define Y_DUAL_STEPPER_DRIVERS

-// Define if the two Y drives need to rotate in opposite directions
-#define INVERT_Y2_VS_Y_DIR true
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  // Define if the two Y drives need to rotate in opposite directions
+  #define INVERT_Y2_VS_Y_DIR true
+#endif

 // Enable this for dual x-carriage printers.
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which