Add support for Megatronics 3 a la #1426

Marlin/boards.h

@@ -41,6 +41,7 @@
 #define BOARD_MEGATRONICS       70   // Megatronics
 #define BOARD_MEGATRONICS_2     701  // Megatronics v2.0
 #define BOARD_MEGATRONICS_1     702  // Minitronics v1.0
+#define BOARD_MEGATRONICS_3     703  // Megatronics v3.0
 #define BOARD_OMCA_A            90   // Alpha OMCA board
 #define BOARD_OMCA              91   // Final OMCA board
 #define BOARD_RAMBO             301  // Rambo

Marlin/pins.h

@@ -88,10 +88,12 @@
   #include "pins_GEN3_MONOLITHIC.h"
 #elif MB(MEGATRONICS)
   #include "pins_MEGATRONICS.h"
-#elif MB(MEGATRONICS_2)
-  #include "pins_MEGATRONICS_2.h"
 #elif MB(MEGATRONICS_1)
   #include "pins_MEGATRONICS_1.h"
+#elif MB(MEGATRONICS_2)
+  #include "pins_MEGATRONICS_2.h"
+#elif MB(MEGATRONICS_3)
+  #include "pins_MEGATRONICS_3.h"
 #elif MB(OMCA_A)
   #include "pins_OMCA_A.h"
 #elif MB(OMCA)

Marlin/pins_MEGATRONICS_3.h

@@ -1,5 +1,5 @@
 /**
- * MegaTronics v2.0 pin assignments
+ * MegaTronics v3.0 pin assignments
  */
 
 #ifndef __AVR_ATmega2560__
@@ -8,87 +8,73 @@
 
 #define LARGE_FLASH        true
 
-#define X_STEP_PIN 26
+#define X_STEP_PIN         58
-#define X_DIR_PIN 27
+#define X_DIR_PIN          57
-#define X_ENABLE_PIN 25
+#define X_ENABLE_PIN       59
 #define X_MIN_PIN          37
-#define X_MAX_PIN 40
+#define X_MAX_PIN          40   // 2 // Max endstops default to disabled "-1", set to commented value to enable.
 
-#define Y_STEP_PIN 4 // A6
+#define Y_STEP_PIN         5 // A6
-#define Y_DIR_PIN 54 // A0
+#define Y_DIR_PIN          17 // A0
-#define Y_ENABLE_PIN 5
+#define Y_ENABLE_PIN       4
 #define Y_MIN_PIN          41
-#define Y_MAX_PIN 38
+#define Y_MAX_PIN          38   // 15
 
-#define Z_STEP_PIN 56 // A2
+#define Z_STEP_PIN         16 // A2
-#define Z_DIR_PIN 60 // A6
+#define Z_DIR_PIN          11 // A6
-#define Z_ENABLE_PIN 55 // A1
+#define Z_ENABLE_PIN       3 // A1
 #define Z_MIN_PIN          18
 #define Z_MAX_PIN          19
 
-#define E0_STEP_PIN 35
+#define E0_STEP_PIN        28
-#define E0_DIR_PIN 36
+#define E0_DIR_PIN         27
-#define E0_ENABLE_PIN 34
+#define E0_ENABLE_PIN      29
 
-#define E1_STEP_PIN 29
+#define E1_STEP_PIN        25
-#define E1_DIR_PIN 39
+#define E1_DIR_PIN         24
-#define E1_ENABLE_PIN 28
+#define E1_ENABLE_PIN      26
 
-#define E2_STEP_PIN 23
+#define E2_STEP_PIN        22
-#define E2_DIR_PIN 24
+#define E2_DIR_PIN         60
-#define E2_ENABLE_PIN 22
+#define E2_ENABLE_PIN      23
 
 #define SDPOWER -1
 #define SDSS 53
 #define LED_PIN 13
 
-#define FAN_PIN 7
-#define FAN2_PIN 6
 #define PS_ON_PIN 12
 #define KILL_PIN -1
 
-#define HEATER_0_PIN 9 // EXTRUDER 1
+#define HEATER_0_PIN 2
-#define HEATER_1_PIN 8 // EXTRUDER 2
+#define HEATER_1_PIN 8
-#define HEATER_2_PIN -1
+#define HEATER_2_PIN 9
+#define HEATER_BED_PIN 10
+#define FAN_PIN 6
+#define FAN2_PIN 7
 
-#if TEMP_SENSOR_0 == -1
+#define TEMP_0_PIN   (TEMP_SENSOR_0 == -1 ?  11 : 15) // ANALOG NUMBERING
-  #define TEMP_0_PIN 4 // ANALOG NUMBERING
+#define TEMP_1_PIN   (TEMP_SENSOR_1 == -1 ?  10 : 13) // ANALOG NUMBERING
-#else
+#define TEMP_2_PIN   (TEMP_SENSOR_2 == -1 ?   9 : 12) // ANALOG NUMBERING
-  #define TEMP_0_PIN 13 // ANALOG NUMBERING
+#define TEMP_BED_PIN (TEMP_SENSOR_BED == -1 ? 8 : 14) // ANALOG NUMBERING
-#endif
-
-
-#if TEMP_SENSOR_1 == -1
-  #define TEMP_1_PIN 8 // ANALOG NUMBERING
-#else
-  #define TEMP_1_PIN 15 // ANALOG NUMBERING
-#endif
-
-#define TEMP_2_PIN -1 // ANALOG NUMBERING
-
-#define HEATER_BED_PIN 10 // BED
-
-#if TEMP_SENSOR_BED == -1
-  #define TEMP_BED_PIN 8 // ANALOG NUMBERING
-#else
-  #define TEMP_BED_PIN 14 // ANALOG NUMBERING
-#endif
-
-#define BEEPER 64
 
+#define BEEPER 61
 
-#define LCD_PINS_RS 14
+#define LCD_PINS_RS 32
-#define LCD_PINS_ENABLE 15
+#define LCD_PINS_ENABLE 31
-#define LCD_PINS_D4 30
+#define LCD_PINS_D4 14
-#define LCD_PINS_D5 31
+#define LCD_PINS_D5 30
-#define LCD_PINS_D6 32
+#define LCD_PINS_D6 39
-#define LCD_PINS_D7 33
+#define LCD_PINS_D7 15
 
+#define SHIFT_CLK 43
+#define SHIFT_LD 35
+#define SHIFT_OUT 34
+#define SHIFT_EN 44
 
 // Buttons are directly attached using keypad
-#define BTN_EN1 61
+#define BTN_EN1 44
-#define BTN_EN2 59
+#define BTN_EN2 45
-#define BTN_ENC 43 //the click
+#define BTN_ENC 33 // the click
 
 #define BLEN_C 2
 #define BLEN_B 1