forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #5244 from thinkyhead/rc_danish_nov_2016

Browse Source 
Update to Danish language 10/11-2016
master
Scott Lahteine 9 years ago committed by GitHub
parent d08867986e 6eb6f12c64
commit 32247c1b80
11 changed files with 99 additions and 93 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/language_cz.h
Unescape View File

@ -188,7 +188,7 @@
#define MSG_INFO_EXTRUDERS "Extrudery"
#define MSG_INFO_BAUDRATE "Rychlost"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Pocet tisku"
#define MSG_INFO_COMPLETED_PRINTS "Dokonceno"
#define MSG_INFO_PRINT_TIME "Celkovy cas"

77
Marlin/language_da.h
Unescape View File

@ -31,6 +31,8 @@
#define LANGUAGE_DA_H
#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " er klar"
@ -113,7 +115,7 @@
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bevægelse"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_VOLUMETRIC_ENABLED "E i mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrast"
#define MSG_STORE_EPROM "Gem i EEPROM"
@ -140,13 +142,15 @@
#define MSG_CONTROL_RETRACTF "Tilbagetræk V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Skift UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Skift filament"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Skift SD kort"
#define MSG_ZPROBE_OUT "Probe udenfor plade"
#define MSG_BLTOUCH_SELFTEST "BLTouch Selv-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "først"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
@ -157,15 +161,16 @@
#define MSG_HEATING_FAILED_LCD "Opvarmning fejlet"
#define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp"
#define MSG_THERMAL_RUNAWAY "Temp løber løbsk"
#define MSG_ERR_MAXTEMP "Fejl: MAKSTEMP"
#define MSG_ERR_MINTEMP "Fejl: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Fejl: MAKSTEMP PLADE"
#define MSG_ERR_MINTEMP_BED "Fejl: MINTEMP PLADE"
#define MSG_HALTED "PRINTER HALTED"
#define MSG_PLEASE_RESET "Reset venligst"
#define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_ERR_MAXTEMP "Fejl: Maks temp"
#define MSG_ERR_MINTEMP "Fejl: Min temp"
#define MSG_ERR_MAXTEMP_BED "Fejl: Maks Plade temp"
#define MSG_ERR_MINTEMP_BED "Fejl: Min Plade temp"
#define MSG_ERR_Z_HOMING "G28 Z Forbudt"
#define MSG_HALTED "PRINTER STOPPET"
#define MSG_PLEASE_RESET "Reset Venligst"
#define MSG_SHORT_DAY "d" // Kun et bogstav
#define MSG_SHORT_HOUR "h" // Kun et bogstav
#define MSG_SHORT_MINUTE "m" // Kun et bogstav
#define MSG_HEATING "Opvarmer..."
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
@ -178,19 +183,19 @@
#define MSG_INFO_MENU "Om Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_STATS_MENU "Printer Stat."
#define MSG_INFO_BOARD_MENU "Board Info"
#define MSG_INFO_STATS_MENU "Printer Stats"
#define MSG_INFO_BOARD_MENU "Kort Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#define MSG_INFO_EXTRUDERS "Extrudere"
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Antal Print"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Ant. Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total print tid"
#define MSG_INFO_PRINT_LONGEST "Længste print tid"
#define MSG_INFO_PRINT_FILAMENT "Total extruderet"
#define MSG_INFO_PRINT_LONGEST "Længste print"
#define MSG_INFO_PRINT_FILAMENT "Total Extruderet"
#else
#define MSG_INFO_PRINT_COUNT "Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
@ -201,36 +206,38 @@
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Strømforsyning"
#define MSG_INFO_PSU "Strømfors."
#define MSG_DRIVE_STRENGTH "Driv Styrke"
#define MSG_DAC_PERCENT "Driv %"
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Skriv"
#define MSG_FILAMENT_CHANGE_HEADER "SKIFT FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "SKIFTE MULIGHEDER:"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "Skift muligheder:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruder mere"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "forsæt print"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Forsæt print"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent på"
#define MSG_FILAMENT_CHANGE_INIT_2 "skift af "
#define MSG_FILAMENT_CHANGE_INIT_3 "filament"
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent på start"
#define MSG_FILAMENT_CHANGE_INIT_2 "af filament"
#define MSG_FILAMENT_CHANGE_INIT_3 "skift"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament tømning"
#define MSG_FILAMENT_CHANGE_INSERT_1 "indsæt filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk for"
#define MSG_FILAMENT_CHANGE_INSERT_3 "at fortsætte..."
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament udskyd."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk på knap"
#define MSG_FILAMENT_CHANGE_INSERT_3 "for at fortsætte..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament fødning"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament indtag"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent på"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudere"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at"
#define MSG_FILAMENT_CHANGE_RESUME_2 "print forsætter"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudering"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at print"
#define MSG_FILAMENT_CHANGE_RESUME_2 "fortsætter"
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent venligst..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Tømmer..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Udskyder..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Føder..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Indtager..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudere..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DA_H

2
Marlin/language_de.h
Unescape View File

@ -185,7 +185,7 @@
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Gesamte Drucke"
#define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke"
#define MSG_INFO_PRINT_TIME "Gesamte Druckzeit"

2
Marlin/language_el.h
Unescape View File

@ -180,7 +180,7 @@
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Print Count"
#define MSG_INFO_COMPLETED_PRINTS "Completed "
#define MSG_INFO_PRINT_TIME "Total Time "

2
Marlin/language_en.h
Unescape View File

@ -488,7 +488,7 @@
#define MSG_INFO_PROTOCOL "Protocol"
#endif
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT "Print Count"
#endif

3
Marlin/language_fr.h
Unescape View File

@ -188,8 +188,7 @@
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocole"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Nbre impressions"
#define MSG_INFO_COMPLETED_PRINTS "Terminees"
#define MSG_INFO_PRINT_TIME "Tps impr. total"

2
Marlin/language_gl.h
Unescape View File

@ -182,7 +182,7 @@
#define MSG_INFO_EXTRUDERS "Extrusores"
#define MSG_INFO_BAUDRATE "Baudios"
#define MSG_INFO_PROTOCOL "Protocolo"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Total traballos"
#define MSG_INFO_COMPLETED_PRINTS "Total completos"
#define MSG_INFO_PRINT_TIME "Tempo impresion"

2
Marlin/language_it.h
Unescape View File

@ -190,7 +190,7 @@
#define MSG_INFO_EXTRUDERS "Estrusori"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocollo"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Contat. stampa"
#define MSG_INFO_COMPLETED_PRINTS "Completati"
#define MSG_INFO_PRINT_TIME "Tempo totale"

26
Marlin/language_kana.h
Unescape View File

@ -89,7 +89,7 @@
#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " ｻｲﾃｲ" (" Min")
#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " ｻｲｺｳ" (" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " ﾌｧｸﾀｰ" (" Fact")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae" // "ｼﾞﾄﾞｳｵﾝﾄﾞｾｲｷﾞｮ" ("Autotemp")
#else
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "ｼﾞﾄﾞｳｵﾝﾄﾞ" ("Autotemp")
@ -101,7 +101,7 @@
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "\xbe\xdd\xc0\xb8" // "ｾﾝﾀｸ" ("Select")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" // "ｶｿｸﾄﾞ mm/s2" ("Accel")
#define MSG_VX_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Xｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vx-jerk")
#define MSG_VY_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Yｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vy-jerk")
@ -132,7 +132,7 @@
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ｳｺﾞｷｾｯﾃｲ" ("Motion")
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "ﾌｨﾗﾒﾝﾄ" ("Filament")
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "ﾌｨﾗﾒﾝﾄﾁｮｯｹｲ" ("Fil. Dia.")
#else
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｹｲ" ("Fil. Dia.")
@ -157,7 +157,7 @@
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "ｳｺﾞｷﾏｾﾝ" ("No move.")
#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "ﾋｼﾞｮｳﾃｲｼ" ("KILLED. ")
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "ﾃｲｼｼﾏｼﾀ" ("STOPPED. ")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "ﾋｷｺﾐﾘｮｳ mm" ("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "ﾋｷｺﾐﾘｮｳS mm" ("Swap Re.mm")
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s" // "ﾋｷｺﾐｿｸﾄﾞ mm/s" ("Retract V")
@ -179,14 +179,14 @@
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "SDｶｰﾄﾞｻｲﾖﾐｺﾐ" ("Init. SD card")
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "SDｶｰﾄﾞｺｳｶﾝ" ("Change SD card")
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Zﾌﾟﾛｰﾌﾞ ﾍﾞｯﾄﾞｶﾞｲ" ("Z probe out. bed")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd" // "BLTouch ｼﾞｺｼﾝﾀﾞﾝ" ("BLTouch Self-Test")
#else
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4" // "BLTouch ｾﾙﾌﾃｽﾄ" ("BLTouch Self-Test")
#endif
#define MSG_BLTOUCH_RESET "BLTouch \xd8\xbe\xaf\xc4" // "BLTouch ﾘｾｯﾄ" ("Reset BLTouch")
#define MSG_HOME "\xbb\xb7\xc6" // "ｻｷﾆ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2" // "ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" ("first")
#else
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xd6" // "ｦﾌｯｷｻｾﾖ" ("first")
@ -195,13 +195,13 @@
#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Xｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep X")
#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Yｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Y")
#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Zｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Z")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁｷﾉｳ" ("Endstop abort")
#else
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁ" ("Endstop abort")
#endif
#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2" // "ｶﾈﾂｼｯﾊﾟｲ" ("Heating failed")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀｰｷﾉｳ" ("Err: REDUNDANT TEMP")
#else
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀ" ("Err: REDUNDANT TEMP")
@ -209,7 +209,7 @@
#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "ﾈﾂﾎﾞｳｿｳ" ("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP")
#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP BED")
#else
@ -243,20 +243,20 @@
#define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "ｶﾝﾘｮｳｽｳ" ("Completed")
#define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time")
#define MSG_INFO_PRINT_LONGEST "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd" // "ｻｲﾁｮｳﾌﾟﾘﾝﾄｼﾞｶﾝ" ("Longest job time")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｼﾖｳﾘｮｳﾙｲｹｲ" ("Extruded total")
#else
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3" // "ﾌｨﾗﾒﾝﾄｿｳｼﾖｳﾘｮｳ" ("Extruded")
#endif
#define MSG_INFO_MIN_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd" // "ｾｯﾃｲｻｲﾃｲｵﾝ" ("Min Temp")
#define MSG_INFO_MAX_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd" // "ｾｯﾃｲｻｲｺｳｵﾝ" ("Max Temp")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2" // "ﾃﾞﾝｹﾞﾝｼｭﾍﾞﾂ" ("Power Supply")
#else
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd" // "ﾃﾞﾝｹﾞﾝ" ("Power Supply")
#endif
#define MSG_DRIVE_STRENGTH "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8" // "ﾓｰﾀｰｸﾄﾞｳﾘｮｸ" ("Drive Strength")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8 %" // "DACｼｭﾂﾘｮｸ %" ("Driver %")
#else
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACｼｭﾂﾘｮｸ" ("Driver %")
@ -288,7 +288,7 @@
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Please wait...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Ejecting...")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｼﾃｸﾀﾞｻｲ" ("Insert and Click")
#else
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click")

2
Marlin/language_tr.h
Unescape View File

@ -186,7 +186,7 @@
#define MSG_INFO_BAUDRATE "\xddleti\xfeim H\xfdz\xfd"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Bask\xfd Say\xfds\xfd"
#define MSG_INFO_COMPLETED_PRINTS "Tamamlanan"
#define MSG_INFO_PRINT_TIME "Toplam Bask\xfd S\xfcresi"

4
Marlin/ultralcd_impl_HD44780.h
Unescape View File

@ -721,7 +721,7 @@ static void lcd_implementation_status_screen() {
lcd.print(itostr3(feedrate_percentage));
lcd.print('%');
#if LCD_WIDTH > 19 && ENABLED(SDSUPPORT)
#if LCD_WIDTH >= 20 && ENABLED(SDSUPPORT)
lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD"));
@ -731,7 +731,7 @@ static void lcd_implementation_status_screen() {
lcd_printPGM(PSTR("---"));
lcd.print('%');
#endif // LCD_WIDTH > 19 && SDSUPPORT
#endif // LCD_WIDTH >= 20 && SDSUPPORT
lcd.setCursor(LCD_WIDTH - 6, 2);
lcd.print(LCD_STR_CLOCK[0]);

Write Preview
Loading…
Cancel
Save