Implementing [FR] #7548

Added new configuration to inhibit XYZ movements when home is not done

Marlin/Configuration.h

@@ -759,6 +759,8 @@
 
 // @section homing
 
+//#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 

Marlin/Marlin.h

@@ -422,7 +422,15 @@ void do_blocking_move_to_x(const float &x, const float &fr_mm_s=0.0);
 void do_blocking_move_to_z(const float &z, const float &fr_mm_s=0.0);
 void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s=0.0);
 
-#define HAS_AXIS_UNHOMED_ERR (ENABLED(Z_PROBE_ALLEN_KEY) || ENABLED(Z_PROBE_SLED) || HAS_PROBING_PROCEDURE || HOTENDS > 1 || ENABLED(NOZZLE_CLEAN_FEATURE) || ENABLED(NOZZLE_PARK_FEATURE) || (ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(HOME_BEFORE_FILAMENT_CHANGE)))
+#define HAS_AXIS_UNHOMED_ERR (                                                     \
+         ENABLED(Z_PROBE_ALLEN_KEY)                                                \
+      || ENABLED(Z_PROBE_SLED)                                                     \
+      || HAS_PROBING_PROCEDURE                                                     \
+      || HOTENDS > 1                                                               \
+      || ENABLED(NOZZLE_CLEAN_FEATURE)                                             \
+      || ENABLED(NOZZLE_PARK_FEATURE)                                              \
+      || (ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(HOME_BEFORE_FILAMENT_CHANGE)) \
+    ) || ENABLED(NO_MOTION_BEFORE_HOMING)
 
 #if HAS_AXIS_UNHOMED_ERR
   bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true);

Marlin/Marlin_main.cpp

@@ -1850,7 +1850,7 @@ static void clean_up_after_endstop_or_probe_move() {
     return false;
   }
 
-#endif
+#endif // HAS_AXIS_UNHOMED_ERR
 
 #if ENABLED(Z_PROBE_SLED)
 
@@ -2053,7 +2053,7 @@ static void clean_up_after_endstop_or_probe_move() {
     #endif
   }
 
-#endif
+#endif // Z_PROBE_ALLEN_KEY
 
 #if ENABLED(PROBING_FANS_OFF)
 
@@ -3383,6 +3383,10 @@ inline void gcode_G0_G1(
     bool fast_move=false
   #endif
 ) {
+  #if ENABLED(NO_MOTION_BEFORE_HOMING)
+    if (axis_unhomed_error()) return;
+  #endif
+
   if (IsRunning()) {
     gcode_get_destination(); // For X Y Z E F
 
@@ -3438,6 +3442,10 @@ inline void gcode_G0_G1(
 #if ENABLED(ARC_SUPPORT)
 
   inline void gcode_G2_G3(bool clockwise) {
+    #if ENABLED(NO_MOTION_BEFORE_HOMING)
+      if (axis_unhomed_error()) return;
+    #endif
+
     if (IsRunning()) {
 
       #if ENABLED(SF_ARC_FIX)
@@ -3535,6 +3543,10 @@ inline void gcode_G4() {
    * G5: Cubic B-spline
    */
   inline void gcode_G5() {
+    #if ENABLED(NO_MOTION_BEFORE_HOMING)
+      if (axis_unhomed_error()) return;
+    #endif
+
     if (IsRunning()) {
 
       #if ENABLED(CNC_WORKSPACE_PLANES)
@@ -5862,6 +5874,10 @@ void home_all_axes() { gcode_G28(true); }
    * G42: Move X & Y axes to mesh coordinates (I & J)
    */
   inline void gcode_G42() {
+    #if ENABLED(NO_MOTION_BEFORE_HOMING)
+      if (axis_unhomed_error()) return;
+    #endif
+
     if (IsRunning()) {
       const bool hasI = parser.seenval('I');
       const int8_t ix = hasI ? parser.value_int() : 0;

Marlin/ultralcd.cpp

@@ -2929,8 +2929,12 @@ void kill_screen(const char* lcd_msg) {
    *
    */
 
-  #if IS_KINEMATIC
+  #if IS_KINEMATIC || ENABLED(NO_MOTION_BEFORE_HOMING)
     #define _MOVE_XYZ_ALLOWED (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
+  #else
+    #define _MOVE_XYZ_ALLOWED true
+  #endif
+
   #if ENABLED(DELTA)
     #define _MOVE_XY_ALLOWED (current_position[Z_AXIS] <= delta_clip_start_height)
     void lcd_lower_z_to_clip_height() {
@@ -2940,10 +2944,6 @@ void kill_screen(const char* lcd_msg) {
   #else
     #define _MOVE_XY_ALLOWED true
   #endif
-  #else
-    #define _MOVE_XYZ_ALLOWED true
-    #define _MOVE_XY_ALLOWED true
-  #endif
 
   void lcd_move_menu() {
     START_MENU();