Cosmetic changes and small fix for thermistortables.h

・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array

Marlin/thermistortables.h

@@ -29,7 +29,6 @@
 #define OVERSAMPLENR 16
 
 #if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1)  || (THERMISTORHEATER_2 == 1) || (THERMISTORHEATER_3 == 1) || (THERMISTORBED == 1) //100k bed thermistor
-
 const short temptable_1[][2] PROGMEM = {
   {   23 * OVERSAMPLENR, 300 },
   {   25 * OVERSAMPLENR, 295 },
@@ -94,11 +93,12 @@ const short temptable_1[][2] PROGMEM = {
   { 1008 * OVERSAMPLENR,   0 } // safety
 };
 #endif
+
 #if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORHEATER_3 == 2) || (THERMISTORBED == 2) //200k bed thermistor
-const short temptable_2[][2] PROGMEM = {
 // 200k ATC Semitec 204GT-2
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+const short temptable_2[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 848 },
   {   30 * OVERSAMPLENR, 300 }, // top rating 300C
   {   34 * OVERSAMPLENR, 290 },
@@ -130,10 +130,10 @@ const short temptable_2[][2] PROGMEM = {
   {  993 * OVERSAMPLENR,  30 },
   { 1004 * OVERSAMPLENR,  20 },
   { 1012 * OVERSAMPLENR,  10 },
-  {1016 * OVERSAMPLENR, 0},
+  { 1016 * OVERSAMPLENR,   0 }
 };
-
 #endif
+
 #if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORHEATER_3 == 3) || (THERMISTORBED == 3) //mendel-parts
 const short temptable_3[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 864 },
@@ -165,8 +165,8 @@ const short temptable_3[][2] PROGMEM = {
   { 1008 * OVERSAMPLENR,   0 },
   { 1018 * OVERSAMPLENR, -20 }
 };
-
 #endif
+
 #if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORHEATER_3 == 4) || (THERMISTORBED == 4) //10k thermistor
 const short temptable_4[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 430 },
@@ -193,10 +193,10 @@ const short temptable_4[][2] PROGMEM = {
 #endif
 
 #if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORHEATER_3 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
-const short temptable_5[][2] PROGMEM = {
 // ATC Semitec 104GT-2 (Used in ParCan)
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+const short temptable_5[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 713 },
   {   17 * OVERSAMPLENR, 300 }, // top rating 300C
   {   20 * OVERSAMPLENR, 290 },
@@ -485,7 +485,7 @@ const short temptable_71[][2] PROGMEM = {
   {  995 * OVERSAMPLENR,  15 },
   { 1001 * OVERSAMPLENR,  10 },
   { 1006 * OVERSAMPLENR,   5 },
-  {1010 * OVERSAMPLENR, 0},
+  { 1010 * OVERSAMPLENR,   0 }
 };
 #endif
 
@@ -514,6 +514,7 @@ const short temptable_8[][2] PROGMEM = {
   { 1008 * OVERSAMPLENR,   0 }
 };
 #endif
+
 #if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORHEATER_3 == 9) || (THERMISTORBED == 9)
 // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
 const short temptable_9[][2] PROGMEM = {
@@ -550,6 +551,7 @@ const short temptable_9[][2] PROGMEM = {
   { 1016 * OVERSAMPLENR,   0 }
 };
 #endif
+
 #if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORHEATER_3 == 10) || (THERMISTORBED == 10)
 // 100k RS thermistor 198-961 (4.7k pullup)
 const short temptable_10[][2] PROGMEM = {
@@ -589,7 +591,6 @@ const short temptable_10[][2] PROGMEM = {
 
 #if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORHEATER_3 == 11) || (THERMISTORBED == 11)
 // QU-BD silicone bed QWG-104F-3950 thermistor
-
 const short temptable_11[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 938 },
   {   31 * OVERSAMPLENR, 314 },
@@ -646,7 +647,6 @@ const short temptable_11[][2] PROGMEM = {
 
 #if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORHEATER_3 == 13) || (THERMISTORBED == 13)
 // Hisens thermistor B25/50 =3950 +/-1%
-
 const short temptable_13[][2] PROGMEM = {
   {  20.04 * OVERSAMPLENR, 300 },
   {  23.19 * OVERSAMPLENR, 290 },
@@ -676,8 +676,8 @@ const short temptable_13[][2] PROGMEM = {
 #endif
 
 #if (THERMISTORHEATER_0 == 20) || (THERMISTORHEATER_1 == 20) || (THERMISTORHEATER_2 == 20) || (THERMISTORBED == 20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
-/* The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
-This does not match the normal thermistor behaviour so we need to set the following defines */
+// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
+// This does not match the normal thermistor behaviour so we need to set the following defines
 #if (THERMISTORHEATER_0 == 20)
   #define HEATER_0_RAW_HI_TEMP 16383
   #define HEATER_0_RAW_LO_TEMP 0
@@ -976,9 +976,10 @@ const short temptable_60[][2] PROGMEM = {
   {  981 * OVERSAMPLENR,  23 },
   {  991 * OVERSAMPLENR,  17 },
   { 1001 * OVERSAMPLENR,   9 },
-  {1008 * OVERSAMPLENR, 0},
+  { 1008 * OVERSAMPLENR,   0 }
 };
 #endif
+
 #if (THERMISTORHEATER_0 == 12) || (THERMISTORHEATER_1 == 12) || (THERMISTORHEATER_2 == 12) || (THERMISTORHEATER_3 == 12) || (THERMISTORBED == 12)
 // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
 const short temptable_12[][2] PROGMEM = {
@@ -1011,7 +1012,7 @@ const short temptable_12[][2] PROGMEM = {
   {  995 * OVERSAMPLENR,  15 },
   { 1001 * OVERSAMPLENR,  10 },
   { 1010 * OVERSAMPLENR,   0 },
-  {1023 * OVERSAMPLENR, -40},
+  { 1023 * OVERSAMPLENR, -40 }
 };
 #endif