Add Delta kinematic optimization options

master
Scott Lahteine 8 years ago
parent 8e31640229
commit 3913e04ac7

@ -7789,34 +7789,38 @@ void ok_to_send() {
* - Use a fast-inverse-sqrt function and add the reciprocal.
* (see above)
*/
void inverse_kinematics(const float logical[XYZ]) {
const float cartesian[XYZ] = {
RAW_X_POSITION(logical[X_AXIS]),
RAW_Y_POSITION(logical[Y_AXIS]),
RAW_Z_POSITION(logical[Z_AXIS])
};
// Macro to obtain the Z position of an individual tower
#define DELTA_Z(T) cartesian[Z_AXIS] + _SQRT( \
#define DELTA_Z(T) raw[Z_AXIS] + _SQRT( \
delta_diagonal_rod_2_tower_##T - HYPOT2( \
delta_tower##T##_x - cartesian[X_AXIS], \
delta_tower##T##_y - cartesian[Y_AXIS] \
delta_tower##T##_x - raw[X_AXIS], \
delta_tower##T##_y - raw[Y_AXIS] \
) \
)
delta[A_AXIS] = DELTA_Z(1);
delta[B_AXIS] = DELTA_Z(2);
delta[C_AXIS] = DELTA_Z(3);
#define DELTA_LOGICAL_IK() do { \
const float raw[XYZ] = { \
RAW_X_POSITION(logical[X_AXIS]), \
RAW_Y_POSITION(logical[Y_AXIS]), \
RAW_Z_POSITION(logical[Z_AXIS]) \
}; \
delta[A_AXIS] = DELTA_Z(1); \
delta[B_AXIS] = DELTA_Z(2); \
delta[C_AXIS] = DELTA_Z(3); \
} while(0)
#define DELTA_DEBUG() do { \
SERIAL_ECHOPAIR("cartesian X:", raw[X_AXIS]); \
SERIAL_ECHOPAIR(" Y:", raw[Y_AXIS]); \
SERIAL_ECHOLNPAIR(" Z:", raw[Z_AXIS]); \
SERIAL_ECHOPAIR("delta A:", delta[A_AXIS]); \
SERIAL_ECHOPAIR(" B:", delta[B_AXIS]); \
SERIAL_ECHOLNPAIR(" C:", delta[C_AXIS]); \
} while(0)
/*
SERIAL_ECHOPAIR("cartesian X:", cartesian[X_AXIS]);
SERIAL_ECHOPAIR(" Y:", cartesian[Y_AXIS]);
SERIAL_ECHOLNPAIR(" Z:", cartesian[Z_AXIS]);
SERIAL_ECHOPAIR("delta A:", delta[A_AXIS]);
SERIAL_ECHOPAIR(" B:", delta[B_AXIS]);
SERIAL_ECHOLNPAIR(" C:", delta[C_AXIS]);
//*/
void inverse_kinematics(const float logical[XYZ]) {
DELTA_LOGICAL_IK();
// DELTA_DEBUG();
}
/**
@ -8090,19 +8094,87 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// SERIAL_ECHOPAIR(" seconds=", seconds);
// SERIAL_ECHOLNPAIR(" segments=", segments);
// Set the target to the current position to start
// Send all the segments to the planner
#if ENABLED(DELTA) && ENABLED(USE_RAW_KINEMATICS)
#define DELTA_E raw[E_AXIS]
#define DELTA_NEXT(ADDEND) LOOP_XYZE(i) raw[i] += ADDEND;
#define DELTA_IK() do { \
delta[A_AXIS] = DELTA_Z(1); \
delta[B_AXIS] = DELTA_Z(2); \
delta[C_AXIS] = DELTA_Z(3); \
} while(0)
// Get the raw current position as starting point
float raw[ABC] = {
RAW_CURRENT_POSITION(X_AXIS),
RAW_CURRENT_POSITION(Y_AXIS),
RAW_CURRENT_POSITION(Z_AXIS)
};
#else
#define DELTA_E logical[E_AXIS]
#define DELTA_NEXT(ADDEND) LOOP_XYZE(i) logical[i] += ADDEND;
#if ENABLED(DELTA)
#define DELTA_IK() DELTA_LOGICAL_IK()
#else
#define DELTA_IK() inverse_kinematics(logical)
#endif
// Get the logical current position as starting point
LOOP_XYZE(i) logical[i] = current_position[i];
// Send all the segments to the planner
for (uint16_t s = 0; s < segments; s++) {
LOOP_XYZE(i) logical[i] += segment_distance[i];
inverse_kinematics(logical);
#endif
#if ENABLED(USE_DELTA_IK_INTERPOLATION)
// Get the starting delta for interpolation
if (segments >= 2) inverse_kinematics(logical);
for (uint16_t s = segments + 1; --s;) {
if (s > 1) {
// Save the previous delta for interpolation
float prev_delta[ABC] = { delta[A_AXIS], delta[B_AXIS], delta[C_AXIS] };
// Get the delta 2 segments ahead (rather than the next)
DELTA_NEXT(segment_distance[i] + segment_distance[i]);
DELTA_IK();
// Move to the interpolated delta position first
planner.buffer_line(
(prev_delta[A_AXIS] + delta[A_AXIS]) * 0.5,
(prev_delta[B_AXIS] + delta[B_AXIS]) * 0.5,
(prev_delta[C_AXIS] + delta[C_AXIS]) * 0.5,
logical[E_AXIS], _feedrate_mm_s, active_extruder
);
// Do an extra decrement of the loop
--s;
}
else {
// Get the last segment delta (only when segments is odd)
DELTA_NEXT(segment_distance[i])
DELTA_IK();
}
//DEBUG_POS("prepare_kinematic_move_to", logical);
//DEBUG_POS("prepare_kinematic_move_to", delta);
// Move to the non-interpolated position
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], DELTA_E, _feedrate_mm_s, active_extruder);
}
#else
// For non-interpolated delta calculate every segment
for (uint16_t s = segments + 1; --s;) {
DELTA_NEXT(segment_distance[i])
DELTA_IK();
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], logical[E_AXIS], _feedrate_mm_s, active_extruder);
}
#endif
return true;
}

Loading…
Cancel
Save