add RepRapPro Huxley thermistor tables

Marlin/Configuration.h

@@ -68,6 +68,9 @@
 // 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
 // 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
 // 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+// 10 is 100k RS thermistor 198-961 (4.7k pullup)
 //
 //    1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k 
 //                          (but gives greater accuracy and more stable PID)

Marlin/thermistortables.h

@@ -312,8 +312,105 @@ const short temptable_7[][2] PROGMEM = {
    {1023*OVERSAMPLENR, 0}  //to allow internal 0°C
 };
 #endif
+#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8)
+// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+const short temptable_8[][2] PROGMEM = {
+   {1*OVERSAMPLENR, 704},
+   {54*OVERSAMPLENR, 216},
+   {107*OVERSAMPLENR, 175},
+   {160*OVERSAMPLENR, 152},
+   {213*OVERSAMPLENR, 137},
+   {266*OVERSAMPLENR, 125},
+   {319*OVERSAMPLENR, 115},
+   {372*OVERSAMPLENR, 106},
+   {425*OVERSAMPLENR, 99},
+   {478*OVERSAMPLENR, 91},
+   {531*OVERSAMPLENR, 85},
+   {584*OVERSAMPLENR, 78},
+   {637*OVERSAMPLENR, 71},
+   {690*OVERSAMPLENR, 65},
+   {743*OVERSAMPLENR, 58},
+   {796*OVERSAMPLENR, 50},
+   {849*OVERSAMPLENR, 42},
+   {902*OVERSAMPLENR, 31},
+   {955*OVERSAMPLENR, 17},
+   {1008*OVERSAMPLENR, 0}
+};
+#endif
+#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORBED == 9)
+// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+const short temptable_9[][2] PROGMEM = {
+	{1*OVERSAMPLENR, 936},
+	{36*OVERSAMPLENR, 300},
+	{71*OVERSAMPLENR, 246},
+	{106*OVERSAMPLENR, 218},
+	{141*OVERSAMPLENR, 199},
+	{176*OVERSAMPLENR, 185},
+	{211*OVERSAMPLENR, 173},
+	{246*OVERSAMPLENR, 163},
+	{281*OVERSAMPLENR, 155},
+	{316*OVERSAMPLENR, 147},
+	{351*OVERSAMPLENR, 140},
+	{386*OVERSAMPLENR, 134},
+	{421*OVERSAMPLENR, 128},
+	{456*OVERSAMPLENR, 122},
+	{491*OVERSAMPLENR, 117},
+	{526*OVERSAMPLENR, 112},
+	{561*OVERSAMPLENR, 107},
+	{596*OVERSAMPLENR, 102},
+	{631*OVERSAMPLENR, 97},
+	{666*OVERSAMPLENR, 92},
+	{701*OVERSAMPLENR, 87},
+	{736*OVERSAMPLENR, 81},
+	{771*OVERSAMPLENR, 76},
+	{806*OVERSAMPLENR, 70},
+	{841*OVERSAMPLENR, 63},
+	{876*OVERSAMPLENR, 56},
+	{911*OVERSAMPLENR, 48},
+	{946*OVERSAMPLENR, 38},
+	{981*OVERSAMPLENR, 23},
+	{1005*OVERSAMPLENR, 5},
+	{1016*OVERSAMPLENR, 0}
+};
+#endif
+#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORBED == 10)
+// 100k RS thermistor 198-961 (4.7k pullup)
+const short temptable_10[][2] PROGMEM = {
+   {1*OVERSAMPLENR, 929},
+   {36*OVERSAMPLENR, 299},
+   {71*OVERSAMPLENR, 246},
+   {106*OVERSAMPLENR, 217},
+   {141*OVERSAMPLENR, 198},
+   {176*OVERSAMPLENR, 184},
+   {211*OVERSAMPLENR, 173},
+   {246*OVERSAMPLENR, 163},
+   {281*OVERSAMPLENR, 154},
+   {316*OVERSAMPLENR, 147},
+   {351*OVERSAMPLENR, 140},
+   {386*OVERSAMPLENR, 134},
+   {421*OVERSAMPLENR, 128},
+   {456*OVERSAMPLENR, 122},
+   {491*OVERSAMPLENR, 117},
+   {526*OVERSAMPLENR, 112},
+   {561*OVERSAMPLENR, 107},
+   {596*OVERSAMPLENR, 102},
+   {631*OVERSAMPLENR, 97},
+   {666*OVERSAMPLENR, 91},
+   {701*OVERSAMPLENR, 86},
+   {736*OVERSAMPLENR, 81},
+   {771*OVERSAMPLENR, 76},
+   {806*OVERSAMPLENR, 70},
+   {841*OVERSAMPLENR, 63},
+   {876*OVERSAMPLENR, 56},
+   {911*OVERSAMPLENR, 48},
+   {946*OVERSAMPLENR, 38},
+   {981*OVERSAMPLENR, 23},
+   {1005*OVERSAMPLENR, 5},
+   {1016*OVERSAMPLENR, 0}
+};
+#endif
 
-#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51) 
+#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51)
 // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
 // Verified by linagee.
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance