Fixes for TAZ 7. General cleanup.

- Adjusted travel limits for TAZ 7. - Use of MIN endstops now configurable. - Probe enable routine cleaned up. - Current configuration cleaned up.
8 years ago · 3ea7b1c339
parent 21286a784c
commit 3ea7b1c339
2 changed files with 67 additions and 41 deletions
--- a/Marlin/Conditionals_LulzBot.h
+++ b/Marlin/Conditionals_LulzBot.h
@ -13,7 +13,7 @@
 * got disabled.
 */

-#define LULZBOT_FW_VERSION ".19" // Change this with each update
+#define LULZBOT_FW_VERSION ".20" // Change this with each update

 #if ( \
    !defined(LULZBOT_Gladiola_Mini) && \
@ -47,6 +47,7 @@
    #define LULZBOT_IS_MINI
    #define LULZBOT_MINI_BED
    #define LULZBOT_USE_AUTOLEVELING
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_USE_MAX_ENDSTOPS
    #define LULZBOT_BAUDRATE 115200
    #define LULZBOT_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
@ -59,6 +60,7 @@
    #define LULZBOT_MINI_BED
    #define LULZBOT_TWO_PIECE_BED
    #define LULZBOT_USE_AUTOLEVELING
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_USE_MAX_ENDSTOPS
    #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
    #define LULZBOT_BAUDRATE 250000
@ -73,6 +75,7 @@
    #define LULZBOT_MINI_BED
    #define LULZBOT_USE_LCD_DISPLAY
    #define LULZBOT_USE_AUTOLEVELING
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_USE_MAX_ENDSTOPS
    #define LULZBOT_BAUDRATE 115200
    #define LULZBOT_UUID "083f68f1-028e-494c-98e1-f2e0dfaee9a5"
@ -87,6 +90,7 @@
    #define LULZBOT_MINI_BED
    #define LULZBOT_USE_LCD_DISPLAY
    #define LULZBOT_USE_AUTOLEVELING
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_USE_MAX_ENDSTOPS
    #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
    #define LULZBOT_BAUDRATE 250000
@ -100,6 +104,7 @@
    #define LULZBOT_IS_TAZ
    #define LULZBOT_TAZ_BED
    #define LULZBOT_USE_LCD_DISPLAY
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_BAUDRATE 250000
    #define LULZBOT_UUID "c3255c96-4097-4884-8ed0-ded2ff9bae61"
 #endif
@ -111,6 +116,7 @@
    #define LULZBOT_TAZ_BED
    #define LULZBOT_USE_LCD_DISPLAY
    #define LULZBOT_USE_AUTOLEVELING
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_USE_MAX_ENDSTOPS
    #define LULZBOT_USE_HOME_BUTTON
    #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
@ -126,6 +132,7 @@
    #define LULZBOT_TWO_PIECE_BED
    #define LULZBOT_USE_LCD_DISPLAY
    #define LULZBOT_USE_AUTOLEVELING
+    #define LULZBOT_USE_MIN_ENDSTOPS
    #define LULZBOT_USE_MAX_ENDSTOPS
    #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
    #define LULZBOT_BAUDRATE 250000
@ -374,39 +381,29 @@
 *   Z_MIN_PIN corresponds to the Z-Home push button.
 *   Z_MIN_PROBE_PIN are the bed washers.
 */
-#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED)
-    #define LULZBOT_ENABLE_PROBE_PINS(enable) { \
+#define LULZBOT_SET_PIN_STATE(pin, enable) \
    if(enable) { \
        /* Set as inputs with pull-up resistor */ \
-            SET_INPUT(Z_MIN_PIN); \
-            WRITE(Z_MIN_PIN, HIGH); \
+        SET_INPUT(pin); \
+        WRITE(pin, HIGH); \
    } else { \
        /* Ground to prevent EMI */ \
-            SET_OUTPUT(Z_MIN_PIN); \
-            WRITE(Z_MIN_PIN, LOW); \
-        } \
+        SET_OUTPUT(pin); \
+        WRITE(pin, LOW); \
+    }
+
+#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED)
+    #define LULZBOT_ENABLE_PROBE_PINS(enable) { \
+        endstops.enable_z_probe(enable); \
+        LULZBOT_SET_PIN_STATE(Z_MIN_PIN, enable) \
        LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(enable) \
    }

 #elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_USE_HOME_BUTTON)
    #define LULZBOT_ENABLE_PROBE_PINS(enable) { \
-        if(enable) { \
-            /* Set both as inputs with pull-up resistor */ \
-            SET_INPUT(LULZBOT_Z_MIN_PROBE_PIN); \
-            WRITE(LULZBOT_Z_MIN_PROBE_PIN, HIGH); \
-            SET_INPUT(Z_MIN_PIN); \
-            WRITE(Z_MIN_PIN, HIGH); \
-            /* The following is required since Marlin would \
-             * not normally deploy the probe for Z-Min */ \
-            endstops.enable_z_probe(true); \
-        } else { \
-            /* Ground both pins to prevent EMI */ \
-            SET_OUTPUT(LULZBOT_Z_MIN_PROBE_PIN); \
-            WRITE(LULZBOT_Z_MIN_PROBE_PIN, LOW); \
-            SET_OUTPUT(Z_MIN_PIN); \
-            WRITE(Z_MIN_PIN, LOW); \
-            endstops.enable_z_probe(false); \
-        } \
+        endstops.enable_z_probe(enable); \
+        LULZBOT_SET_PIN_STATE(Z_MIN_PIN, enable) \
+        LULZBOT_SET_PIN_STATE(LULZBOT_Z_MIN_PROBE_PIN, enable) \
    }
 #else
    #define LULZBOT_ENABLE_PROBE_PINS(enable)
@ -827,6 +824,15 @@
    #define LULZBOT_X_BED_SIZE                 288
    #define LULZBOT_Y_BED_SIZE                 275

+#elif defined(LULZBOT_Quiver_TAZ7)
+    #define LULZBOT_STANDARD_X_MAX_POS         300
+    #define LULZBOT_STANDARD_X_MIN_POS         -16
+    #define LULZBOT_STANDARD_Y_MAX_POS         303
+    #define LULZBOT_STANDARD_Y_MIN_POS         -20
+
+    #define LULZBOT_X_BED_SIZE                 280
+    #define LULZBOT_Y_BED_SIZE                 280
+
 #elif defined(LULZBOT_IS_TAZ)
    #define LULZBOT_STANDARD_X_MAX_POS         300
    #define LULZBOT_STANDARD_X_MIN_POS         -20
@ -855,7 +861,7 @@

 #elif defined(LULZBOT_Quiver_TAZ7)
    #define LULZBOT_STANDARD_Z_MIN_POS           0
-    #define LULZBOT_STANDARD_Z_MAX_POS         300
+    #define LULZBOT_STANDARD_Z_MAX_POS         299
 #endif

 #define LULZBOT_X_MAX_POS (LULZBOT_STANDARD_X_MAX_POS - LULZBOT_TOOLHEAD_X_MAX_ADJ)
@ -867,9 +873,11 @@

 /**************************** ENDSTOP CONFIGURATION ****************************/

+#if defined(LULZBOT_USE_MIN_ENDSTOPS)
    #define LULZBOT_USE_XMIN_PLUG
    #define LULZBOT_USE_YMIN_PLUG
    #define LULZBOT_USE_ZMIN_PLUG
+#endif

 // Z-Max Endstops were introduced on the Mini and TAZ 6
 #if defined(LULZBOT_USE_MAX_ENDSTOPS)
@ -985,12 +993,36 @@
        Nozzle::clean(0, 2, 0, 0);                    /* wipe nozzle */ \
    }

-/************ ACCELERATION, FEEDRATES, XYZ MOTOR STEPS AND CURRENTS ************/
+/******************************** MOTOR CURRENTS *******************************/

 // Values for XYZ vary by printer model, values for E vary by toolhead.

-#if defined(LULZBOT_IS_MINI)
+#if defined(LULZBOT_Gladiola_Mini) || defined(LULZBOT_Gladiola_MiniLCD)
+    #define LULZBOT_MOTOR_CURRENT_XY              1300   // mA
+    #define LULZBOT_MOTOR_CURRENT_Z               1630   // mA
+
+#elif defined(LULZBOT_Hibiscus_Mini2) || defined(LULZBOT_Hibiscus_Mini2LCD)
    #define LULZBOT_MOTOR_CURRENT_XY              1300   // mA
+    #define LULZBOT_MOTOR_CURRENT_Z               1000   // mA
+
+#elif defined(LULZBOT_Juniper_TAZ5)
+    #define LULZBOT_MOTOR_CURRENT_XY              950    // mA
+    #define LULZBOT_MOTOR_CURRENT_Z               1275   // mA
+
+#elif defined(LULZBOT_Oliveoil_TAZ6)
+    #define LULZBOT_MOTOR_CURRENT_XY              950    // mA
+    #define LULZBOT_MOTOR_CURRENT_Z               1075   // mA
+
+#elif defined(LULZBOT_Quiver_TAZ7) || defined(LULZBOT_Quiver_EinsyTAZ7)
+    #define LULZBOT_MOTOR_CURRENT_XY              950    // mA
+    #define LULZBOT_MOTOR_CURRENT_Z               950    // mA
+#endif
+
+/************ ACCELERATION, FEEDRATES, XYZ MOTOR STEPS *******************/
+
+// Values for XYZ vary by printer model, values for E vary by toolhead.
+
+#if defined(LULZBOT_IS_MINI)
    #define LULZBOT_XY_STEPS                      100.5
    #define LULZBOT_DEFAULT_MAX_FEEDRATE          {300, 300, 8, 40}      // (mm/sec)
    #define LULZBOT_DEFAULT_MAX_ACCELERATION      {9000,9000,100,1000}
@ -1005,7 +1037,6 @@
    #define LULZBOT_Z_PROBE_OFFSET_FROM_EXTRUDER  -1.377

 #elif defined(LULZBOT_IS_TAZ)
-    #define LULZBOT_MOTOR_CURRENT_XY              950     // mA
    #define LULZBOT_XY_STEPS                      100.5
    #define LULZBOT_DEFAULT_XJERK                 8.0
    #define LULZBOT_DEFAULT_YJERK                 8.0
@ -1020,8 +1051,7 @@
    #define LULZBOT_Z_PROBE_OFFSET_FROM_EXTRUDER -1.200
 #endif

-#if defined(LULZBOT_Gladiola_Mini) || defined(LULZBOT_Gladiola_MiniLCD) || defined(LULZBOT_Gladiola_MiniEinsy)
-    #define LULZBOT_MOTOR_CURRENT_Z               1630                   // mA
+#if defined(LULZBOT_Gladiola_Mini) || defined(LULZBOT_Gladiola_MiniLCD)
    #define LULZBOT_Z_STEPS                       1600

 #elif defined(LULZBOT_Hibiscus_Mini2) || defined(LULZBOT_Hibiscus_Mini2LCD)
@ -1032,25 +1062,21 @@
    #define Z_MOTOR_GEAR_REDUCTION                26.8512396694
    #define LULZBOT_Z_STEPS (Z_FULL_STEPS_PER_ROTATION * Z_MICROSTEPS * Z_MOTOR_GEAR_REDUCTION / double(Z_BELT_PITCH) / double(Z_PULLEY_TEETH))

-    #define LULZBOT_MOTOR_CURRENT_Z               1000                   // mA
    #undef  LULZBOT_DEFAULT_MAX_FEEDRATE
    #define LULZBOT_DEFAULT_MAX_FEEDRATE          {300, 300, 8, 25}      // (mm/sec)

 #elif defined(LULZBOT_Juniper_TAZ5)
-    #define LULZBOT_MOTOR_CURRENT_Z               1275                   // mA
    #define LULZBOT_DEFAULT_MAX_FEEDRATE          {300, 300, 3, 25}      // (mm/sec)
    #define LULZBOT_DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
    #define LULZBOT_Z_STEPS                       1600

 #elif defined(LULZBOT_Oliveoil_TAZ6)
-    #define LULZBOT_MOTOR_CURRENT_Z               1075                   // mA
    #define LULZBOT_DEFAULT_MAX_FEEDRATE          {300, 300, 3, 25}      // (mm/sec)
    #define LULZBOT_DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
    #define LULZBOT_Z_STEPS                       1600

 #elif defined(LULZBOT_Quiver_TAZ7)
    // Prototype Z-belt driven TAZ 7
-    #define LULZBOT_MOTOR_CURRENT_Z               950                    // mA
    #define LULZBOT_DEFAULT_MAX_FEEDRATE          {300, 300, 10, 25}     // (mm/sec)
    #define LULZBOT_DEFAULT_MAX_ACCELERATION      {9000,9000,10,10000}
    #define LULZBOT_Z_STEPS                       1790.08264463
--- a/Marlin/Makefile
+++ b/Marlin/Makefile
@ -87,7 +87,7 @@ U8GLIB             ?= 1

 # this defines whether to add a workaround for the avr-gcc relocation bug
 #	  https://www.stix.id.au/wiki/AVR_relocation_truncations_workaround
-RELOC_WORKAROUND   ?= 1
+RELOC_WORKAROUND   ?= 0

 ############
 # The following added by AlephObjects for adjusting the name of the output