Added experimental speedy variant of Mini 2.

- Added test Mini 2 variant with direct drive Z.
- Added selector for variants with and without gearboxen.
- Eliminated deprecated Gladiola/Einsy combo.
master
Marcio Teixeira 7 years ago
parent b0facd5923
commit 47b15b3722

@ -13,19 +13,18 @@
* got disabled.
*/
#define LULZBOT_FW_VERSION ".34" // Change this with each update
#define LULZBOT_FW_VERSION ".35" // Change this with each update
#if ( \
!defined(LULZBOT_Gladiola_Mini) && \
!defined(LULZBOT_Hibiscus_Mini2) && \
!defined(LULZBOT_Gladiola_MiniLCD) && \
!defined(LULZBOT_Juniper_TAZ5) && \
!defined(LULZBOT_Oliveoil_TAZ6) && \
!defined(LULZBOT_Hibiscus_Mini2) && \
!defined(LULZBOT_Hibiscus_Mini2LCD) && \
!defined(LULZBOT_Gladiola_EinsyMini) && \
!defined(LULZBOT_Hibiscus_EinsyMini2) && \
!defined(LULZBOT_Gladiola_EinsyMiniLCD) && \
!defined(LULZBOT_Hibiscus_EinsyMini2LCD) && \
!defined(LULZBOT_Juniper_TAZ5) && \
!defined(LULZBOT_Oliveoil_TAZ6) && \
!defined(LULZBOT_Hibiscus_SpeedyMini2) && \
!defined(LULZBOT_Quiver_TAZ7) \
) || ( \
!defined(TOOLHEAD_Gladiola_SingleExtruder) && \
@ -60,39 +59,68 @@
#define LULZBOT_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
#endif
#if defined(LULZBOT_Gladiola_EinsyMini)
/* Modified Gladiola Mini with Einsy board and half-height
* X & Y motors (full-height Z motors must be re-wired in
* series). X & Y endstops replaced w/ bumpers. */
#if defined(LULZBOT_Gladiola_MiniLCD)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini"
#define LULZBOT_LCD_MACHINE_NAME "Mini Einsy"
#define LULZBOT_LCD_MACHINE_NAME "Mini LCD"
#define LULZBOT_IS_MINI
#define LULZBOT_MINI_BED
#define LULZBOT_USE_EINSYRAMBO
#define LULZBOT_USE_EARLY_EINSY
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_SENSORLESS_HOMING
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
#define LULZBOT_USE_Z_SCREW
#define LULZBOT_BAUDRATE 115200
#define LULZBOT_UUID "4479bf92-7e47-4c2c-be95-64dd01bd413b"
#define LULZBOT_UUID "083f68f1-028e-494c-98e1-f2e0dfaee9a5"
#endif
#if defined(LULZBOT_Gladiola_EinsyMiniLCD)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini"
#define LULZBOT_LCD_MACHINE_NAME "Mini Einsy"
#define LULZBOT_IS_MINI
#define LULZBOT_MINI_BED
#define LULZBOT_USE_EINSYRAMBO
#define LULZBOT_USE_EARLY_EINSY
#if defined(LULZBOT_Juniper_TAZ5)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 5"
#define LULZBOT_LCD_MACHINE_NAME "TAZ 5"
#define LULZBOT_IS_TAZ
#define LULZBOT_TAZ_BED
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
#define LULZBOT_USE_Z_SCREW
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_UUID "c3255c96-4097-4884-8ed0-ded2ff9bae61"
#endif
#if defined(LULZBOT_Oliveoil_TAZ6)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 6"
#define LULZBOT_LCD_MACHINE_NAME "TAZ 6"
#define LULZBOT_IS_TAZ
#define LULZBOT_TAZ_BED
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_SENSORLESS_HOMING
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_HOME_BUTTON
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
#define LULZBOT_USE_Z_SCREW
#define LULZBOT_BAUDRATE 115200
#define LULZBOT_UUID "4479bf92-7e47-4c2c-be95-64dd01bd413b"
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_UUID "845f003c-aebd-4e53-a6b9-7d0984fde609"
#endif
#if defined(LULZBOT_Hibiscus_Mini2)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2"
#define LULZBOT_LCD_MACHINE_NAME "Mini 2"
#define LULZBOT_IS_MINI
#define LULZBOT_MINI_BED
#define LULZBOT_TWO_PIECE_BED
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
#define LULZBOT_USE_Z_BELT
#define LULZBOT_USE_Z_GEARBOX
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "1b8d32d3-0596-4335-8cd4-f3741a095087"
#endif
#if defined(LULZBOT_Hibiscus_SpeedyMini2)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2"
#define LULZBOT_LCD_MACHINE_NAME "Mini 2"
#define LULZBOT_IS_MINI
@ -119,6 +147,7 @@
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_SENSORLESS_HOMING
#define LULZBOT_USE_Z_BELT
#define LULZBOT_USE_Z_GEARBOX
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
@ -136,26 +165,12 @@
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_SENSORLESS_HOMING
#define LULZBOT_USE_Z_BELT
#define LULZBOT_USE_Z_GEARBOX
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
#endif
#if defined(LULZBOT_Gladiola_MiniLCD)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini"
#define LULZBOT_LCD_MACHINE_NAME "Mini LCD"
#define LULZBOT_IS_MINI
#define LULZBOT_MINI_BED
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
#define LULZBOT_USE_Z_SCREW
#define LULZBOT_BAUDRATE 115200
#define LULZBOT_UUID "083f68f1-028e-494c-98e1-f2e0dfaee9a5"
#endif
#if defined(LULZBOT_Hibiscus_Mini2LCD)
// Prototype Mini w/ Z-Belt
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2"
@ -169,40 +184,12 @@
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
#define LULZBOT_USE_Z_BELT
#define LULZBOT_USE_Z_GEARBOX
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "80fed4d6-4d15-4512-a02e-61b1dc4fb072"
#endif
#if defined(LULZBOT_Juniper_TAZ5)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 5"
#define LULZBOT_LCD_MACHINE_NAME "TAZ 5"
#define LULZBOT_IS_TAZ
#define LULZBOT_TAZ_BED
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
#define LULZBOT_USE_Z_SCREW
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_UUID "c3255c96-4097-4884-8ed0-ded2ff9bae61"
#endif
#if defined(LULZBOT_Oliveoil_TAZ6)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 6"
#define LULZBOT_LCD_MACHINE_NAME "TAZ 6"
#define LULZBOT_IS_TAZ
#define LULZBOT_TAZ_BED
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_USE_MIN_ENDSTOPS
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_HOME_BUTTON
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
#define LULZBOT_USE_Z_SCREW
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_UUID "845f003c-aebd-4e53-a6b9-7d0984fde609"
#endif
#if defined(LULZBOT_Quiver_TAZ7)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 7"
#define LULZBOT_LCD_MACHINE_NAME "TAZ 7"
@ -215,6 +202,7 @@
#define LULZBOT_USE_MAX_ENDSTOPS
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
#define LULZBOT_USE_Z_BELT
#define LULZBOT_USE_Z_GEARBOX
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "a952577d-8722-483a-999d-acdc9e772b7b"
@ -349,11 +337,19 @@
#define LULZBOT_QUICKHOME
#endif
#if defined(LULZBOT_MINI_BED)
#if defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT) && !defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m
#define LULZBOT_HOMING_FEEDRATE_Z (50*60) // mm/m
#elif defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_HOMING_FEEDRATE_XY (30*60) // mm/m
#define LULZBOT_HOMING_FEEDRATE_Z (8*60) // mm/m
#elif defined(LULZBOT_TAZ_BED) && defined(LULZBOT_USE_Z_BELT)
#elif defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_SCREW)
#define LULZBOT_HOMING_FEEDRATE_XY (30*60) // mm/m
#define LULZBOT_HOMING_FEEDRATE_Z (8*60) // mm/m
#elif defined(LULZBOT_TAZ_BED) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m
#define LULZBOT_HOMING_FEEDRATE_Z (10*60) // mm/m
@ -464,7 +460,11 @@
#define LULZBOT_Z_PROBE_OFFSET_RANGE_MAX 5
#define LULZBOT_XY_PROBE_SPEED 6000
#define LULZBOT_Z_PROBE_SPEED_SLOW (1*60)
#if defined(LULZBOT_USE_Z_BELT) && !defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_Z_PROBE_SPEED_FAST (50*60)
#else
#define LULZBOT_Z_PROBE_SPEED_FAST (8*60)
#endif
#define LULZBOT_Z_CLEARANCE_DEPLOY_PROBE 5
#define LULZBOT_Z_CLEARANCE_BETWEEN_PROBES 5
@ -541,8 +541,7 @@
/****************************** BACKLASH COMPENSATION **************************/
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
//#define LULZBOT_AXIS_BACKLASH {0.27, 0.05, 0.4, 0}
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_AXIS_BACKLASH {0.00, 0.00, 0.35, 0}
#endif
@ -553,13 +552,14 @@
static const float backlash[NUM_AXIS] = LULZBOT_AXIS_BACKLASH; \
static uint8_t last_direction_bits; \
static bool is_correction = false; \
if(!is_correction) { \
if(!is_correction && leveling_is_active()) { \
uint8_t changed_dir = last_direction_bits ^ dm; \
/* Ignore direction change if no steps are taken in that direction */ \
if(da == 0) CBI(changed_dir, X_AXIS); \
if(db == 0) CBI(changed_dir, Y_AXIS); \
if(dc == 0) CBI(changed_dir, Z_AXIS); \
if(de == 0) CBI(changed_dir, E_AXIS); \
/* Update the direction bits */ \
last_direction_bits ^= changed_dir; \
/* When there is motion in an opposing direction, apply the backlash correction */ \
if(changed_dir) { \
@ -1455,7 +1455,11 @@
#define LULZBOT_MOTOR_CURRENT_XY 1300 // mA
#define LULZBOT_MOTOR_CURRENT_Z 1630 // mA
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && !defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_MOTOR_CURRENT_XY 1300 // mA
#define LULZBOT_MOTOR_CURRENT_Z 2000 // mA
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_MOTOR_CURRENT_XY 1300 // mA
#define LULZBOT_MOTOR_CURRENT_Z 1000 // mA
@ -1467,7 +1471,7 @@
#define LULZBOT_MOTOR_CURRENT_XY 950 // mA
#define LULZBOT_MOTOR_CURRENT_Z 1075 // mA
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_BELT)
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_MOTOR_CURRENT_XY 950 // mA
#define LULZBOT_MOTOR_CURRENT_Z 950 // mA
#endif
@ -1508,7 +1512,12 @@
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_SCREW)
#define LULZBOT_Z_STEPS 1600
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && !defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_Z_STEPS 100.5
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 300, 40} // (mm/sec)
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,9000,1000}
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define Z_FULL_STEPS_PER_ROTATION 200
#define Z_MICROSTEPS 16
#define Z_BELT_PITCH 2

Loading…
Cancel
Save