Merge pull request #5910 from thinkyhead/rc_more_nozzle_wipe

Bidirectional Zig-Zag Nozzle Wipe

Marlin/Configuration.h

@@ -981,13 +981,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1000,6 +1000,7 @@
 //                       |________|_________|_________|
 //                           T1        T2        T3
 //
+//
 // Caveats: End point Z should use the same value as Start point Z.
 //
 // Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
@@ -1008,8 +1009,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/Marlin_main.cpp

@@ -3157,7 +3157,7 @@ inline void gcode_G4() {
 
     uint8_t const pattern = code_seen('P') ? code_value_ushort() : 0;
     uint8_t const strokes = code_seen('S') ? code_value_ushort() : NOZZLE_CLEAN_STROKES;
-    uint8_t const objects = code_seen('T') ? code_value_ushort() : 3;
+    uint8_t const objects = code_seen('T') ? code_value_ushort() : NOZZLE_CLEAN_TRIANGLES;
 
     Nozzle::clean(pattern, strokes, objects);
   }

Marlin/example_configurations/Cartesio/Configuration.h

@@ -981,13 +981,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1008,8 +1008,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/Felix/Configuration.h

@@ -964,13 +964,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -991,8 +991,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -964,13 +964,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -991,8 +991,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/Hephestos/Configuration.h

@@ -973,13 +973,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1000,8 +1000,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -975,13 +975,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1002,8 +1002,11 @@
 #define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { X_MIN_POS + 10, Y_MAX_POS - 9, (Z_MIN_POS + 0.5)}

Marlin/example_configurations/K8200/Configuration.h

@@ -1010,13 +1010,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1037,8 +1037,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/K8400/Configuration.h

@@ -981,13 +981,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1008,8 +1008,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -981,13 +981,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1008,8 +1008,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -981,13 +981,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1008,8 +1008,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/RigidBot/Configuration.h

@@ -980,13 +980,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1007,8 +1007,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/SCARA/Configuration.h

@@ -996,13 +996,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1023,8 +1023,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/TAZ4/Configuration.h

@@ -1002,13 +1002,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1029,8 +1029,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/WITBOX/Configuration.h

@@ -973,13 +973,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1000,8 +1000,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -981,13 +981,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1008,8 +1008,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1068,13 +1068,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1095,8 +1095,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1071,13 +1071,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1098,8 +1098,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1070,13 +1070,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1097,8 +1097,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1074,13 +1074,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1101,8 +1101,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/makibox/Configuration.h

@@ -984,13 +984,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1011,8 +1011,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -977,13 +977,13 @@
 //
 // Available list of patterns:
 //   P0: This is the default pattern, this process requires a sponge type
-//       material at a fixed bed location, the cleaning process is based on
+//       material at a fixed bed location. S defines "strokes" i.e.
-//       "strokes" i.e. back-and-forth movements between the starting and end
+//       back-and-forth movements between the starting and end points.
-//       points.
 //
 //   P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
 //       defines the number of zig-zag triangles to be done. "S" defines the
-//       number of strokes aka one back-and-forth movement. As an example
+//       number of strokes aka one back-and-forth movement. Zig-zags will
+//       be performed in whichever dimension is smallest. As an example,
 //       sending "G12 P1 S1 T3" will execute:
 //
 //          --
@@ -1004,8 +1004,11 @@
 //#define NOZZLE_CLEAN_FEATURE
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
-  // Number of pattern repetitions
+  // Default number of pattern repetitions
   #define NOZZLE_CLEAN_STROKES  12
+  
+  // Default number of triangles
+  #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
   #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}

Marlin/nozzle.h

@@ -26,6 +26,14 @@
 #include "Marlin.h"
 #include "point_t.h"
 
+#if ENABLED(NOZZLE_CLEAN_FEATURE)
+  constexpr float nozzle_clean_start_point[4] = NOZZLE_CLEAN_START_POINT,
+                  nozzle_clean_end_point[4] = NOZZLE_CLEAN_END_POINT,
+                  nozzle_clean_length = fabs(nozzle_clean_start_point[X_AXIS] - nozzle_clean_end_point[X_AXIS]), //abs x size of wipe pad
+                  nozzle_clean_height = fabs(nozzle_clean_start_point[Y_AXIS] - nozzle_clean_end_point[Y_AXIS]); //abs y size of wipe pad
+  constexpr bool nozzle_clean_horizontal = nozzle_clean_length >= nozzle_clean_height; //whether to zig-zag horizontally or vertically
+#endif //NOZZLE_CLEAN_FEATURE
+
 /**
  * @brief Nozzle class
  *
@@ -92,8 +100,8 @@ class Nozzle {
       __attribute__((unused)) uint8_t const &objects
     ) __attribute__((optimize ("Os"))) {
       #if ENABLED(NOZZLE_CLEAN_FEATURE)
-        float A = fabs(end.y - start.y); // [twice the] Amplitude
+        float A = nozzle_clean_horizontal ? nozzle_clean_height : nozzle_clean_length; // [twice the] Amplitude
-        float P = fabs(end.x - start.x) / (objects << 1); // Period
+        float P = ( nozzle_clean_horizontal ? nozzle_clean_length : nozzle_clean_height ) / (objects << 1); // Period
 
         // Don't allow impossible triangles
         if (A <= 0.0f || P <= 0.0f ) return;
@@ -110,16 +118,16 @@ class Nozzle {
 
         for (uint8_t j = 0; j < strokes; j++) {
           for (uint8_t i = 0; i < (objects << 1); i++) {
-            float const x = start.x + i * P;
+            float const x = start.x + ( nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) );
-            float const y = start.y + (A/P) * (P - fabs(fmod((i*P), (2*P)) - P));
+            float const y = start.y + (!nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) );
 
             do_blocking_move_to_xy(x, y);
             if (i == 0) do_blocking_move_to_z(start.z);
           }
 
           for (int i = (objects << 1); i > -1; i--) {
-            float const x = start.x + i * P;
+            float const x = start.x + ( nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) );
-            float const y = start.y + (A/P) * (P - fabs(fmod((i*P), (2*P)) - P));
+            float const y = start.y + (!nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) );
 
             do_blocking_move_to_xy(x, y);
           }