forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Move mesh test options under G26 option

Browse Source
master
Scott Lahteine 7 years ago
parent 4e3b566f72
commit 56035e9965
39 changed files with 384 additions and 498 deletions
Show Stats Download Patch File Download Diff File

23
Marlin/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
//#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

8
Marlin/G26_Mesh_Validation_Tool.cpp
Unescape View File

@ -619,12 +619,12 @@
g26_extrusion_multiplier = EXTRUSION_MULTIPLIER;
g26_retraction_multiplier = RETRACTION_MULTIPLIER;
g26_nozzle = DEFAULT_NOZZLE_SIZE;
g26_nozzle = MESH_TEST_NOZZLE_SIZE;
g26_filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA;
g26_layer_height = DEFAULT_LAYER_HEIGHT;
g26_layer_height = MESH_TEST_LAYER_HEIGHT;
g26_prime_length = PRIME_LENGTH;
g26_bed_temp = DEFAULT_BED_TEMP;
g26_hotend_temp = DEFAULT_HOTEND_TEMP;
g26_bed_temp = MESH_TEST_BED_TEMP;
g26_hotend_temp = MESH_TEST_HOTEND_TEMP;
g26_prime_flag = 0;
g26_ooze_amount = parser.linearval('O', OOZE_AMOUNT);

23
Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -974,6 +977,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1708,18 +1717,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1741,7 +1738,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/AliExpress/CL-260/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Anet/A6/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1097,6 +1100,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1847,18 +1856,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1880,7 +1877,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Anet/A8/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -960,6 +963,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1696,18 +1705,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1729,7 +1726,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/BQ/Hephestos/Configuration.h
Unescape View File

@ -139,6 +139,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -945,6 +948,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1679,18 +1688,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1712,7 +1709,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
Unescape View File

@ -135,6 +135,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -955,6 +958,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1689,18 +1698,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1722,7 +1719,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 2.00 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/BQ/WITBOX/Configuration.h
Unescape View File

@ -139,6 +139,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -945,6 +948,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1679,18 +1688,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1712,7 +1709,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Cartesio/Configuration.h
Unescape View File

@ -137,6 +137,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 3
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -953,6 +956,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1687,18 +1696,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1720,7 +1717,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Creality/CR-10/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -964,6 +967,12 @@
#define UBL_PROBE_PT_3_Y 20
//#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1698,18 +1707,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1734,7 +1731,7 @@
//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT (DEFAULT_NOMINAL_FILAMENT_DIA+4*DEFAULT_STDDEV_FILAMENT_DIA) // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Felix/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -936,6 +939,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1670,18 +1679,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1703,7 +1700,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Felix/DUAL/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 2
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -936,6 +939,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1670,18 +1679,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1703,7 +1700,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -959,6 +962,12 @@
#define UBL_PROBE_PT_3_Y 25
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1693,18 +1702,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1726,7 +1723,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Geeetech/GT2560/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -969,6 +972,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1703,18 +1712,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1736,7 +1733,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Infitary/i3-M508/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -958,6 +961,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1692,18 +1701,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1725,7 +1722,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Malyan/M150/Configuration.h
Unescape View File

@ -141,6 +141,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -982,6 +985,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1716,18 +1725,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1749,7 +1746,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Micromake/C1/basic/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -958,6 +961,12 @@
#define UBL_PROBE_PT_3_Y 20
//#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1692,18 +1701,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1725,7 +1722,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -958,6 +961,12 @@
#define UBL_PROBE_PT_3_Y 20
//#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1692,18 +1701,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1725,7 +1722,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/RigidBot/Configuration.h
Unescape View File

@ -139,6 +139,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -952,6 +955,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -166,6 +166,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -966,6 +969,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1700,18 +1709,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1733,7 +1730,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Sanguinololu/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -985,6 +988,12 @@
#define UBL_PROBE_PT_3_Y 20
//#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1719,18 +1728,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1752,7 +1749,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/TinyBoy2/Configuration.h
Unescape View File

@ -158,6 +158,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1010,6 +1013,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1744,18 +1753,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1777,7 +1774,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Velleman/K8200/Configuration.h
Unescape View File

@ -156,6 +156,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -984,6 +987,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1718,18 +1727,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1751,7 +1748,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Velleman/K8400/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 2
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/adafruit/ST7565/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -954,6 +957,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1688,18 +1697,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1721,7 +1718,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1088,6 +1091,12 @@
#define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1822,18 +1831,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1855,7 +1852,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 1.95 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1082,6 +1085,12 @@
#define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1815,18 +1824,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1848,7 +1845,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/delta/generic/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1077,6 +1080,12 @@
#define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1810,18 +1819,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1843,7 +1840,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1080,6 +1083,12 @@
#define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1813,18 +1822,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1846,7 +1843,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/delta/kossel_pro/Configuration.h
Unescape View File

@ -140,6 +140,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1080,6 +1083,12 @@
#define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1813,18 +1822,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1846,7 +1843,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/delta/kossel_xl/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -1089,6 +1092,12 @@
#define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1822,18 +1831,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1855,7 +1852,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
Unescape View File

@ -141,6 +141,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -968,6 +971,12 @@
#define UBL_PROBE_PT_3_Y 211
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1702,18 +1711,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .5 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .35 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1735,7 +1732,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -957,6 +960,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1691,18 +1700,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1724,7 +1721,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -949,6 +952,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1683,18 +1692,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1716,7 +1713,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

23
Marlin/example_configurations/wt150/Configuration.h
Unescape View File

@ -136,6 +136,9 @@
// :[1, 2, 3, 4, 5]
#define EXTRUDERS 1
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@ -959,6 +962,12 @@
#define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#if ENABLED(UBL_G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@ -1693,18 +1702,6 @@
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
/**
* Default extrusion settings
*
* These settings control basic extrusion from within the Marlin firmware.
*
*/
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
* Filament Width Sensor
*
@ -1726,7 +1723,7 @@
//#define FILAMENT_WIDTH_SENSOR
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading

Write Preview
Loading…
Cancel
Save