Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE

Marlin/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -321,11 +321,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/K8400/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -316,11 +316,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -313,11 +313,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -308,11 +308,11 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
   //                                    as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
   //                                    that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
   //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])