forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Make all EEPROM optimization options available

Browse Source
master
Scott Lahteine 8 years ago
parent 015839fc50
commit 69297b2d7b
32 changed files with 158 additions and 219 deletions
Show Stats Download Patch File Download Diff File

10
Marlin/Configuration.h
Unescape View File

@ -964,6 +964,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -988,13 +989,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Anet/A6/Configuration.h
Unescape View File

@ -1111,6 +1111,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1144,13 +1145,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Anet/A8/Configuration.h
Unescape View File

@ -970,6 +970,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -994,13 +995,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/CL-260/Configuration.h
Unescape View File

@ -961,6 +961,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -985,13 +986,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Cartesio/Configuration.h
Unescape View File

@ -958,6 +958,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -982,13 +983,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Felix/Configuration.h
Unescape View File

@ -942,6 +942,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -966,13 +967,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Felix/DUAL/Configuration.h
Unescape View File

@ -942,6 +942,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -966,13 +967,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
Unescape View File

@ -964,6 +964,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -988,13 +989,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Hephestos/Configuration.h
Unescape View File

@ -950,6 +950,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -974,13 +975,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/Hephestos_2/Configuration.h
Unescape View File

@ -953,6 +953,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -977,13 +978,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

5
Marlin/example_configurations/Infitary-i3-M508/Configuration.h
Unescape View File

@ -944,6 +944,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -968,8 +969,8 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
// To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out: // To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:

10
Marlin/example_configurations/K8200/Configuration.h
Unescape View File

@ -989,6 +989,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1013,13 +1014,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS // K8200: uses EEPROM by default #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/K8400/Configuration.h
Unescape View File

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/K8400/Dual-head/Configuration.h
Unescape View File

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/M150/Configuration.h
Unescape View File

@ -987,6 +987,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1011,13 +1012,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
Unescape View File

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/RigidBot/Configuration.h
Unescape View File

@ -958,6 +958,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -982,13 +983,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -972,6 +972,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -996,13 +997,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/TAZ4/Configuration.h
Unescape View File

@ -979,6 +979,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1003,13 +1004,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/TinyBoy2/Configuration.h
Unescape View File

@ -1016,6 +1016,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1040,13 +1041,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/WITBOX/Configuration.h
Unescape View File

@ -950,6 +950,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -974,13 +975,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/adafruit/ST7565/Configuration.h
Unescape View File

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
Unescape View File

@ -1081,6 +1081,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1104,13 +1105,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
Unescape View File

@ -1083,6 +1083,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1106,13 +1107,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/delta/generic/Configuration.h
Unescape View File

@ -1072,6 +1072,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1095,13 +1096,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape View File

@ -1075,6 +1075,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1098,13 +1099,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/delta/kossel_pro/Configuration.h
Unescape View File

@ -1080,6 +1080,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1103,13 +1104,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/delta/kossel_xl/Configuration.h
Unescape View File

@ -1138,6 +1138,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1161,13 +1162,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
Unescape View File

@ -976,6 +976,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1000,13 +1001,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -963,6 +963,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -987,13 +988,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -955,6 +955,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -979,13 +980,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

10
Marlin/example_configurations/wt150/Configuration.h
Unescape View File

@ -966,6 +966,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -990,13 +991,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS)
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#endif
// //
// Host Keepalive // Host Keepalive

Write Preview
Loading…
Cancel
Save