Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD

Conflicts:
	Marlin/dogm_lcd_implementation.h
master
Steffen Vogel 10 years ago
commit 69dc411ae0

@ -297,7 +297,7 @@
// using:
//#define MENU_ADDAUTOSTART
// Show a progress bar on the LCD when printing from SD?
// Show a progress bar on HD44780 LCDs for SD printing
//#define LCD_PROGRESS_BAR
#ifdef LCD_PROGRESS_BAR
@ -309,6 +309,12 @@
#define PROGRESS_MSG_EXPIRE 0
// Enable this to show messages for MSG_TIME then hide them
//#define PROGRESS_MSG_ONCE
#ifdef DOGLCD
#warning LCD_PROGRESS_BAR does not apply to graphical displays at this time.
#endif
#ifdef FILAMENT_LCD_DISPLAY
#error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
#endif
#endif
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

@ -1281,28 +1281,32 @@ void refresh_cmd_timeout(void)
feedrate=retract_feedrate*60;
retracted[active_extruder]=true;
prepare_move();
current_position[Z_AXIS]-=retract_zlift;
if(retract_zlift > 0.01) {
current_position[Z_AXIS]-=retract_zlift;
#ifdef DELTA
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
#else
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
#endif
prepare_move();
prepare_move();
}
feedrate = oldFeedrate;
} else if(!retracting && retracted[active_extruder]) {
destination[X_AXIS]=current_position[X_AXIS];
destination[Y_AXIS]=current_position[Y_AXIS];
destination[Z_AXIS]=current_position[Z_AXIS];
destination[E_AXIS]=current_position[E_AXIS];
current_position[Z_AXIS]+=retract_zlift;
if(retract_zlift > 0.01) {
current_position[Z_AXIS]+=retract_zlift;
#ifdef DELTA
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
#else
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
#endif
//prepare_move();
//prepare_move();
}
if (swapretract) {
current_position[E_AXIS]-=(retract_length_swap+retract_recover_length_swap)/volumetric_multiplier[active_extruder];
} else {

@ -1,19 +1,20 @@
/**
*dogm_lcd_implementation.h
* dogm_lcd_implementation.h
*
*Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
*Demonstrator: http://www.reprap.org/wiki/STB_Electronics
*License: http://opensource.org/licenses/BSD-3-Clause
* Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
* Demonstrator: http://www.reprap.org/wiki/STB_Electronics
* License: http://opensource.org/licenses/BSD-3-Clause
*
*With the use of:
*u8glib by Oliver Kraus
*http://code.google.com/p/u8glib/
*License: http://opensource.org/licenses/BSD-3-Clause
* With the use of:
* u8glib by Oliver Kraus
* http://code.google.com/p/u8glib/
* License: http://opensource.org/licenses/BSD-3-Clause
*/
#ifndef DOGM_LCD_IMPLEMENTATION_H
#define DOGM_LCD_IMPLEMENTATION_H
#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
#define MARLIN_VERSION "1.0.2"
/**
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
@ -51,12 +52,12 @@
*/
// DOGM parameters (size in pixels)
#define DOG_CHAR_WIDTH 6
#define DOG_CHAR_HEIGHT 12
#define DOG_CHAR_WIDTH_LARGE 9
#define DOG_CHAR_HEIGHT_LARGE 18
#define DOG_CHAR_WIDTH 6
#define DOG_CHAR_HEIGHT 12
#define DOG_CHAR_WIDTH_LARGE 9
#define DOG_CHAR_HEIGHT_LARGE 18
#define START_ROW 0
#define START_ROW 0
/* Custom characters defined in font font_6x10_marlin.c */
#define LCD_STR_DEGREE "\xB0"
@ -69,7 +70,7 @@
#define LCD_STR_BEDTEMP "\xFE"
#define LCD_STR_THERMOMETER "\xFF"
#define FONT_STATUSMENU u8g_font_6x9
#define FONT_STATUSMENU u8g_font_6x9
int lcd_contrast;
@ -82,7 +83,7 @@ U8GLIB_ST7920_128X64_RRD u8g(0);
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif
static void lcd_implementation_init()
@ -134,28 +135,12 @@ static void lcd_implementation_init()
} while(u8g.nextPage());
}
static void lcd_implementation_clear()
{
// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
//
// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
//
// u8g.firstPage();
// do {
// u8g.setColorIndex(0);
// u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
// u8g.setColorIndex(1);
// } while( u8g.nextPage() );
}
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
static void lcd_printPGM(const char* str)
{
char c;
while((c = pgm_read_byte(str++)) != '\0')
{
u8g.print(c);
}
static void lcd_printPGM(const char* str) {
char c;
while ((c = pgm_read_byte(str++))) u8g.print(c);
}
static void _draw_heater_status(int x, int heater) {
@ -178,49 +163,44 @@ static void _draw_heater_status(int x, int heater) {
}
}
static void lcd_implementation_status_screen()
{
static void lcd_implementation_status_screen() {
static unsigned char fan_rot = 0;
static unsigned char fan_rot = 0;
u8g.setColorIndex(1); // black on white
u8g.setColorIndex(1); // black on white
// Symbols menu graphics, animated fan
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
// Symbols menu graphics, animated fan
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
#ifdef SDSUPPORT
//SD Card Symbol
u8g.drawBox(42,42,8,7);
u8g.drawBox(50,44,2,5);
u8g.drawFrame(42,49,10,4);
u8g.drawPixel(50,43);
// Progress bar
u8g.drawFrame(54,49,73,4);
#ifdef SDSUPPORT
// SD Card Symbol
u8g.drawBox(42,42,8,7);
u8g.drawBox(50,44,2,5);
u8g.drawFrame(42,49,10,4);
u8g.drawPixel(50,43);
// SD Card Progress bar and clock
u8g.setFont(FONT_STATUSMENU);
// Progress bar frame
u8g.drawFrame(54,49,73,4);
if (IS_SD_PRINTING)
{
// Progress bar
u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
}
// SD Card Progress bar and clock
u8g.setFont(FONT_STATUSMENU);
if (IS_SD_PRINTING) {
// Progress bar solid part
u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
}
u8g.setPrintPos(80,47);
if (starttime != 0) {
uint16_t time = millis()/60000 - starttime/60000;
u8g.print(itostr2(time/60));
u8g.print(':');
u8g.print(itostr2(time%60));
}
else {
// do nothing
}
u8g.setPrintPos(80,47);
if(starttime != 0)
{
uint16_t time = millis()/60000 - starttime/60000;
u8g.print(itostr2(time/60));
u8g.print(':');
u8g.print(itostr2(time%60));
}else{
lcd_printPGM(PSTR("--:--"));
}
#endif
lcd_printPGM(PSTR("--:--"));
}
#endif
// Extruders
_draw_heater_status(6, 0);
@ -234,101 +214,95 @@ static void lcd_implementation_status_screen()
// Heatbed
_draw_heater_status(81, -1);
// Fan
u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(104,27);
#if defined(FAN_PIN) && FAN_PIN > -1
u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
u8g.print("%");
#else
u8g.print("---");
#endif
// X, Y, Z-Coordinates
u8g.setFont(FONT_STATUSMENU);
u8g.drawBox(0,29,128,10);
u8g.setColorIndex(0); // white on black
u8g.setPrintPos(2,37);
u8g.print("X");
u8g.drawPixel(8,33);
u8g.drawPixel(8,35);
u8g.setPrintPos(10,37);
u8g.print(ftostr31ns(current_position[X_AXIS]));
u8g.setPrintPos(43,37);
lcd_printPGM(PSTR("Y"));
u8g.drawPixel(49,33);
u8g.drawPixel(49,35);
u8g.setPrintPos(51,37);
u8g.print(ftostr31ns(current_position[Y_AXIS]));
u8g.setPrintPos(83,37);
u8g.print("Z");
u8g.drawPixel(89,33);
u8g.drawPixel(89,35);
u8g.setPrintPos(91,37);
u8g.print(ftostr31(current_position[Z_AXIS]));
u8g.setColorIndex(1); // black on white
// Feedrate
u8g.setFont(u8g_font_6x10_marlin);
u8g.setPrintPos(3,49);
u8g.print(LCD_STR_FEEDRATE[0]);
u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(12,48);
u8g.print(itostr3(feedmultiply));
u8g.print('%');
// Status line
u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(0,61);
#ifndef FILAMENT_LCD_DISPLAY
u8g.print(lcd_status_message);
#else
if(message_millis+5000>millis()){ //Display both Status message line and Filament display on the last line
u8g.print(lcd_status_message);
}
else
{
lcd_printPGM(PSTR("dia:"));
u8g.print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" factor:"));
u8g.print(itostr3(extrudemultiply));
u8g.print('%');
}
#endif
// Fan
u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(104,27);
#if defined(FAN_PIN) && FAN_PIN > -1
u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
u8g.print("%");
#else
u8g.print("---");
#endif
}
// X, Y, Z-Coordinates
u8g.setFont(FONT_STATUSMENU);
u8g.drawBox(0,29,128,10);
u8g.setColorIndex(0); // white on black
u8g.setPrintPos(2,37);
u8g.print("X");
u8g.drawPixel(8,33);
u8g.drawPixel(8,35);
u8g.setPrintPos(10,37);
u8g.print(ftostr31ns(current_position[X_AXIS]));
u8g.setPrintPos(43,37);
lcd_printPGM(PSTR("Y"));
u8g.drawPixel(49,33);
u8g.drawPixel(49,35);
u8g.setPrintPos(51,37);
u8g.print(ftostr31ns(current_position[Y_AXIS]));
u8g.setPrintPos(83,37);
u8g.print("Z");
u8g.drawPixel(89,33);
u8g.drawPixel(89,35);
u8g.setPrintPos(91,37);
u8g.print(ftostr31(current_position[Z_AXIS]));
u8g.setColorIndex(1); // black on white
// Feedrate
u8g.setFont(u8g_font_6x10_marlin);
u8g.setPrintPos(3,49);
u8g.print(LCD_STR_FEEDRATE[0]);
u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(12,48);
u8g.print(itostr3(feedmultiply));
u8g.print('%');
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
{
char c;
// Status line
u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(0,61);
#ifndef FILAMENT_LCD_DISPLAY
u8g.print(lcd_status_message);
#else
if (millis() < message_millis + 5000) { //Display both Status message line and Filament display on the last line
u8g.print(lcd_status_message);
}
else {
lcd_printPGM(PSTR("dia:"));
u8g.print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" factor:"));
u8g.print(itostr3(extrudemultiply));
u8g.print('%');
}
#endif
}
uint8_t n = LCD_WIDTH - 1 - 2;
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
char c;
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
{
u8g.setColorIndex(1); // black on white
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
u8g.setColorIndex(0); // following text must be white on black
} else u8g.setColorIndex(1); // unmarked text is black on white
uint8_t n = LCD_WIDTH - 1 - 2;
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) {
u8g.setColorIndex(1); // black on white
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
u8g.setColorIndex(0); // following text must be white on black
}
else {
u8g.setColorIndex(1); // unmarked text is black on white
}
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
while( (c = pgm_read_byte(pstr)) != '\0' )
{
u8g.print(c);
pstr++;
n--;
}
while(n--){
u8g.print(' ');
}
while((c = pgm_read_byte(pstr))) {
u8g.print(c);
pstr++;
n--;
}
while(n--) u8g.print(' ');
u8g.print(post_char);
u8g.print(' ');
u8g.setColorIndex(1); // restore settings to black on white
u8g.print(post_char);
u8g.print(' ');
u8g.setColorIndex(1); // restore settings to black on white
}
static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
@ -393,14 +367,13 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, char* value)
{
u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
u8g.setFont(u8g_font_9x18);
lcd_printPGM(pstr);
u8g.print(':');
u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
u8g.print(value);
void lcd_implementation_drawedit(const char* pstr, char* value) {
u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
u8g.setFont(u8g_font_9x18);
lcd_printPGM(pstr);
u8g.print(':');
u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
u8g.print(value);
}
static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
@ -419,7 +392,7 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
}
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
u8g.print(' '); // Indent by 1 char
u8g.print(' '); // Indent by 1 char
if (isDir) u8g.print(LCD_STR_FOLDER[0]);
@ -447,20 +420,16 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
static void lcd_implementation_quick_feedback()
{
#if BEEPER > -1
static void lcd_implementation_quick_feedback() {
#if BEEPER > -1
SET_OUTPUT(BEEPER);
for(int8_t i=0;i<10;i++)
{
WRITE(BEEPER,HIGH);
delay(3);
WRITE(BEEPER,LOW);
delay(3);
for(int8_t i=0; i<10; i++) {
WRITE(BEEPER,HIGH);
delay(3);
WRITE(BEEPER,LOW);
delay(3);
}
#endif
#endif
}
#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
#endif //__DOGM_LCD_IMPLEMENTATION_H

@ -195,7 +195,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
if (feedback) lcd_quick_feedback();
// For LCD_PROGRESS_BAR re-initialize the custom characters
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
lcd_set_custom_characters(menu == lcd_status_screen);
#endif
}
@ -204,7 +204,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
static void lcd_status_screen()
{
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
uint16_t mil = millis();
#ifndef PROGRESS_MSG_ONCE
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
@ -236,11 +236,12 @@ static void lcd_status_screen()
lcd_status_update_delay--;
else
lcdDrawUpdate = 1;
if (lcdDrawUpdate)
{
if (lcdDrawUpdate) {
lcd_implementation_status_screen();
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
}
#ifdef ULTIPANEL
bool current_click = LCD_CLICKED;
@ -265,7 +266,7 @@ static void lcd_status_screen()
{
lcd_goto_menu(lcd_main_menu);
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
currentMenu == lcd_status_screen
#endif
);
@ -1191,7 +1192,7 @@ void lcd_update()
lcdDrawUpdate = 2;
lcd_oldcardstatus = IS_SD_INSERTED;
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
currentMenu == lcd_status_screen
#endif
);
@ -1294,7 +1295,7 @@ void lcd_finishstatus() {
}
}
lcd_status_message[LCD_WIDTH] = '\0';
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
#if PROGRESS_MSG_EXPIRE > 0
messageTick =
#endif

@ -30,9 +30,9 @@ What bugs are we working on: [Bug Fixing Round 2](https://github.com/MarlinFirmw
## Contact
__IRC:__ #marlin-firmware @freenode
__IRC:__ #marlin-firmware @freenode ([WebChat Client](https://webchat.freenode.net/?channels=marlin-firmware), [Archive](http://energymonitor-dk.dns4e.net/marlin-firmware-log/))
__Google Hangouts:__ https://plus.google.com/hangouts/_/event/cps5d0ru0iruhl6ebqbk9dpqpa4?authuser=0&hl=da
__Mailing List:__ marlin@lists.0l.de ([Subscribe](http://lists.0l.de/mailman/listinfo/marlin), [Archive](http://lists.0l.de/pipermail/marlin/))
## Credits

Loading…
Cancel
Save