forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

Browse Source
master
daid303 12 years ago
parent 94ea26ff46
commit 6a9bee27cc
10 changed files with 280 additions and 301 deletions
Show Stats Download Patch File Download Diff File

24
Marlin/ConfigurationStore.h
Unescape View File

@ -1,24 +1,22 @@
#ifndef CONFIG_STORE_H
#define CONFIG_STORE_H
#include "Configuration.h"
void Config_ResetDefault();
#include "Configuration.h"
void Config_ResetDefault();
#ifdef EEPROM_CHITCHAT
void Config_PrintSettings();
#else
#else
FORCE_INLINE void Config_PrintSettings() {}
#endif
#endif
#ifdef EEPROM_SETTINGS
void Config_StoreSettings();
void Config_RetrieveSettings();
#else
void Config_RetrieveSettings();
#else
FORCE_INLINE void Config_StoreSettings() {}
FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
#endif
FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
#endif
#endif//CONFIG_STORE_H

3
Marlin/Marlin.h
Unescape View File

@ -179,7 +179,8 @@ void setPwmFrequency(uint8_t pin, int val);
extern float homing_feedrate[];
extern bool axis_relative_modes[];
extern int feedmultiply;
extern int feedmultiply;
extern bool feedmultiplychanged;
extern int extrudemultiply; // Sets extrude multiply factor (in percent)
extern float current_position[NUM_AXIS] ;
extern float add_homeing[3];

30
Marlin/Marlin_main.cpp
Unescape View File

@ -146,7 +146,8 @@ CardReader card;
#endif
float homing_feedrate[] = HOMING_FEEDRATE;
bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
int feedmultiply=100; //100->1 200->2
int feedmultiply=100; //100->1 200->2
bool feedmultiplychanged;
int saved_feedmultiply;
int extrudemultiply=100; //100->1 200->2
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
@ -360,7 +361,7 @@ void setup()
st_init(); // Initialize stepper, this enables interrupts!
setup_photpin();
LCD_INIT;
lcd_init();
}
@ -401,7 +402,7 @@ void loop()
manage_heater();
manage_inactivity();
checkHitEndstops();
LCD_STATUS;
lcd_update();
}
void get_command()
@ -534,7 +535,7 @@ void get_command()
sprintf_P(time, PSTR("%i min, %i sec"),min,sec);
SERIAL_ECHO_START;
SERIAL_ECHOLN(time);
LCD_MESSAGE(time);
lcd_setstatus(time);
card.printingHasFinished();
card.checkautostart(true);
@ -683,7 +684,7 @@ void process_commands()
while(millis() < codenum ){
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
}
break;
#ifdef FWRETRACT
@ -847,16 +848,16 @@ void process_commands()
previous_millis_cmd = millis();
if (codenum > 0){
codenum += millis(); // keep track of when we started waiting
while(millis() < codenum && !CLICKED){
while(millis() < codenum && !LCD_CLICKED){
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
}
}else{
while(!CLICKED){
while(!LCD_CLICKED){
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
}
}
}
@ -947,7 +948,7 @@ void process_commands()
sprintf_P(time, PSTR("%i min, %i sec"), min, sec);
SERIAL_ECHO_START;
SERIAL_ECHOLN(time);
LCD_MESSAGE(time);
lcd_setstatus(time);
autotempShutdown();
}
break;
@ -1075,7 +1076,7 @@ void process_commands()
}
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
#ifdef TEMP_RESIDENCY_TIME
/* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
or when current temp falls outside the hysteresis after target temp was reached */
@ -1113,7 +1114,7 @@ void process_commands()
}
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
}
LCD_MESSAGEPGM(MSG_BED_DONE);
previous_millis_cmd = millis();
@ -1220,7 +1221,7 @@ void process_commands()
SERIAL_PROTOCOLPGM(MSG_M115_REPORT);
break;
case 117: // M117 display message
LCD_MESSAGE(cmdbuffer[bufindr]+5);
lcd_setstatus(cmdbuffer[bufindr]+5);
break;
case 114: // M114
SERIAL_PROTOCOLPGM("X:");
@ -1370,7 +1371,8 @@ void process_commands()
{
if(code_seen('S'))
{
feedmultiply = code_value() ;
feedmultiply = code_value() ;
feedmultiplychanged = true;
}
}
break;

4
Marlin/cardreader.cpp
Unescape View File

@ -279,7 +279,7 @@ void CardReader::openFile(char* name,bool read)
sdpos = 0;
SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
LCD_MESSAGE(fname);
lcd_setstatus(fname);
}
else
{
@ -301,7 +301,7 @@ void CardReader::openFile(char* name,bool read)
saving = true;
SERIAL_PROTOCOLPGM(MSG_SD_WRITE_TO_FILE);
SERIAL_PROTOCOLLN(name);
LCD_MESSAGE(fname);
lcd_setstatus(fname);
}
}

11
Marlin/cardreader.h
Unescape View File

@ -69,6 +69,17 @@ private:
extern CardReader card;
#define IS_SD_PRINTING (card.sdprinting)
#if (SDCARDDETECT > -1)
# ifdef SDCARDDETECTINVERTED
# define IS_SD_INSERTED (READ(SDCARDDETECT)!=0)
# else
# define IS_SD_INSERTED (READ(SDCARDDETECT)==0)
# endif //SDCARDTETECTINVERTED
#else
//If we don't have a card detect line, aways asume the card is inserted
# define IS_SD_INSERTED true
#endif
#else
#define IS_SD_PRINTING (false)

2
Marlin/planner.cpp
Unescape View File

@ -506,7 +506,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
{
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
}
// The target position of the tool in absolute steps

2
Marlin/stepper.cpp
Unescape View File

@ -905,7 +905,7 @@ void st_synchronize()
while( blocks_queued()) {
manage_heater();
manage_inactivity();
LCD_STATUS;
lcd_update();
}
}

21
Marlin/temperature.cpp
Unescape View File

@ -190,6 +190,9 @@ void PID_autotune(float temp, int extruder, int ncycles)
for(;;) {
if(temp_meas_ready == true) { // temp sample ready
//Reset the watchdog after we know we have a temperature measurement.
watchdog_reset();
CRITICAL_SECTION_START;
temp_meas_ready = false;
CRITICAL_SECTION_END;
@ -291,7 +294,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
SERIAL_PROTOCOLLNPGM("PID Autotune finished ! Place the Kp, Ki and Kd constants in the configuration.h");
return;
}
LCD_STATUS;
lcd_update();
}
}
@ -957,9 +960,7 @@ ISR(TIMER0_COMPB_vect)
ADMUX = ((1 << REFS0) | (TEMP_0_PIN & 0x07));
ADCSRA |= 1<<ADSC; // Start conversion
#endif
#ifdef ULTIPANEL
buttons_check();
#endif
lcd_buttons_update();
temp_state = 1;
break;
case 1: // Measure TEMP_0
@ -981,9 +982,7 @@ ISR(TIMER0_COMPB_vect)
ADMUX = ((1 << REFS0) | (TEMP_BED_PIN & 0x07));
ADCSRA |= 1<<ADSC; // Start conversion
#endif
#ifdef ULTIPANEL
buttons_check();
#endif
lcd_buttons_update();
temp_state = 3;
break;
case 3: // Measure TEMP_BED
@ -1002,9 +1001,7 @@ ISR(TIMER0_COMPB_vect)
ADMUX = ((1 << REFS0) | (TEMP_1_PIN & 0x07));
ADCSRA |= 1<<ADSC; // Start conversion
#endif
#ifdef ULTIPANEL
buttons_check();
#endif
lcd_buttons_update();
temp_state = 5;
break;
case 5: // Measure TEMP_1
@ -1023,9 +1020,7 @@ ISR(TIMER0_COMPB_vect)
ADMUX = ((1 << REFS0) | (TEMP_2_PIN & 0x07));
ADCSRA |= 1<<ADSC; // Start conversion
#endif
#ifdef ULTIPANEL
buttons_check();
#endif
lcd_buttons_update();
temp_state = 7;
break;
case 7: // Measure TEMP_2

348
Marlin/ultralcd.cpp
Unescape View File

@ -11,21 +11,15 @@
//=============================imported variables============================
//===========================================================================
extern volatile int feedmultiply;
extern volatile bool feedmultiplychanged;
extern volatile int extrudemultiply;
extern long position[4];
#ifdef SDSUPPORT
#include "cardreader.h"
extern CardReader card;
#endif
//===========================================================================
//=============================public variables============================
//===========================================================================
volatile char buttons=0; //the last checked buttons in a bit array.
volatile uint8_t buttons=0; //the last checked buttons in a bit array.
long encoderpos=0;
short lastenc=0;
@ -79,13 +73,13 @@ void lcdProgMemprint(const char *str)
int intround(const float &x){return int(0.5+x);}
void lcd_status(const char* message)
void lcd_setstatus(const char* message)
{
strncpy(messagetext,message,LCD_WIDTH);
messagetext[strlen(message)]=0;
}
void lcd_statuspgm(const char* message)
void lcd_setstatuspgm(const char* message)
{
char ch=pgm_read_byte(message);
char *target=messagetext;
@ -100,9 +94,9 @@ void lcd_statuspgm(const char* message)
*target=0;
}
void lcd_alertstatuspgm(const char* message)
void lcd_setalertstatuspgm(const char* message)
{
lcd_statuspgm(message);
lcd_setstatuspgm(message);
menu.showStatus();
}
@ -116,7 +110,7 @@ void lcd_init()
{
//beep();
#ifdef ULTIPANEL
buttons_init();
lcd_buttons_init();
#endif
byte Degree[8] =
@ -217,7 +211,7 @@ void beepshort()
#endif
}
void lcd_status()
void lcd_update()
{
#ifdef ULTIPANEL
static uint8_t oldbuttons=0;
@ -250,7 +244,7 @@ void lcd_status()
#ifdef ULTIPANEL
void buttons_init()
void lcd_buttons_init()
{
#ifdef NEWPANEL
pinMode(BTN_EN1,INPUT);
@ -276,8 +270,8 @@ void buttons_init()
#endif
}
void buttons_check()
/* Warning, this is called from interrupt context! */
void lcd_buttons_update()
{
#ifdef NEWPANEL
@ -536,7 +530,7 @@ enum {ItemP_exit, ItemP_autostart,ItemP_disstep,ItemP_home, ItemP_origin, ItemP_
#define MENUITEM(repaint_action, click_action) \
{\
if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
if((activeline==line) && CLICKED) {click_action} \
if((activeline==line) && LCD_CLICKED) {click_action} \
}
void MainMenu::showPrepare()
@ -550,48 +544,48 @@ void MainMenu::showPrepare()
switch(i)
{
case ItemP_exit:
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , LCD_BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemP_autostart:
MENUITEM( LCD_PRINT_PGM(MSG_AUTOSTART) , BLOCK;
MENUITEM( LCD_PRINT_PGM(MSG_AUTOSTART) , LCD_BLOCK;
#ifdef SDSUPPORT
card.lastnr=0;card.setroot();card.checkautostart(true);
#endif
beepshort(); ) ;
break;
case ItemP_disstep:
MENUITEM( LCD_PRINT_PGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_DISABLE_STEPPERS) , LCD_BLOCK;enquecommand("M84");beepshort(); ) ;
break;
case ItemP_home:
MENUITEM( LCD_PRINT_PGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_AUTO_HOME) , LCD_BLOCK;enquecommand("G28");beepshort(); ) ;
break;
case ItemP_origin:
MENUITEM( LCD_PRINT_PGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_SET_ORIGIN) , LCD_BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
break;
case ItemP_preheat_pla:
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA) , LCD_BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
#if FAN_PIN > -1
FanSpeed = plaPreheatFanSpeed;
analogWrite(FAN_PIN, FanSpeed);
fanSpeed = plaPreheatFanSpeed;
analogWrite(FAN_PIN, fanSpeed);
#endif
beepshort(); );
break;
case ItemP_preheat_abs:
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS) , LCD_BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
#if FAN_PIN > -1
FanSpeed = absPreheatFanSpeed;
analogWrite(FAN_PIN, FanSpeed);
fanSpeed = absPreheatFanSpeed;
analogWrite(FAN_PIN, fanSpeed);
#endif
beepshort(); );
break;
case ItemP_cooldown:
MENUITEM( LCD_PRINT_PGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_COOLDOWN) , LCD_BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
break;
// case ItemP_extrude:
// MENUITEM( LCD_PRINT_PGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
// MENUITEM( LCD_PRINT_PGM(" Extrude") , LCD_BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
// break;
case ItemP_move:
MENUITEM( LCD_PRINT_PGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); );
MENUITEM( LCD_PRINT_PGM(MSG_MOVE_AXIS) , LCD_BLOCK;status=Sub_PrepareMove;beepshort(); );
break;
default:
break;
@ -617,7 +611,7 @@ void MainMenu::showAxisMove()
switch(i)
{
case ItemAM_exit:
MENUITEM( LCD_PRINT_PGM(MSG_PREPARE_ALT) , BLOCK;status=Main_Prepare;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_PREPARE_ALT) , LCD_BLOCK;status=Main_Prepare;beepshort(); ) ;
break;
case ItemAM_X:
{
@ -631,7 +625,7 @@ void MainMenu::showAxisMove()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -644,7 +638,7 @@ void MainMenu::showAxisMove()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -676,7 +670,7 @@ void MainMenu::showAxisMove()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -689,7 +683,7 @@ void MainMenu::showAxisMove()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -721,7 +715,7 @@ void MainMenu::showAxisMove()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -734,7 +728,7 @@ void MainMenu::showAxisMove()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -757,11 +751,11 @@ void MainMenu::showAxisMove()
break;
case ItemAM_E:
// ErikDB: TODO: this length should be changed for volumetric.
MENUITEM( LCD_PRINT_PGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_EXTRUDE) , LCD_BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ;
break;
case ItemAM_ERetract:
// ErikDB: TODO: this length should be changed for volumetric.
MENUITEM( LCD_PRINT_PGM(MSG_RETRACT) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_RETRACT) , LCD_BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ;
break;
default:
break;
@ -787,7 +781,7 @@ void MainMenu::showTune()
switch(i)
{
case ItemT_exit:
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , LCD_BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemT_speed:
{
@ -800,7 +794,7 @@ void MainMenu::showTune()
if((activeline!=line) )
break;
if(CLICKED) //AnalogWrite(FAN_PIN, fanpwm);
if(LCD_CLICKED) //AnalogWrite(FAN_PIN, fanpwm);
{
linechanging=!linechanging;
if(linechanging)
@ -812,7 +806,7 @@ void MainMenu::showTune()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -835,7 +829,7 @@ void MainMenu::showTune()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -848,7 +842,7 @@ void MainMenu::showTune()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -869,7 +863,7 @@ void MainMenu::showTune()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -882,7 +876,7 @@ void MainMenu::showTune()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -899,32 +893,32 @@ void MainMenu::showTune()
if(force_lcd_update)
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
lcd.setCursor(13,line);lcd.print(ftostr3(fanSpeed));
}
if((activeline!=line) )
break;
if(CLICKED) //nalogWrite(FAN_PIN, fanpwm);
if(LCD_CLICKED) //nalogWrite(FAN_PIN, fanpwm);
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=FanSpeed;
encoderpos=fanSpeed;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>255) encoderpos=255;
FanSpeed=encoderpos;
analogWrite(FAN_PIN, FanSpeed);
fanSpeed=encoderpos;
analogWrite(FAN_PIN, fanSpeed);
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
@ -940,7 +934,7 @@ void MainMenu::showTune()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -956,7 +950,7 @@ void MainMenu::showTune()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -981,7 +975,7 @@ void MainMenu::showTune()
if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
if(activeline==line) \
{ \
if(CLICKED) \
if(LCD_CLICKED) \
{ \
linechanging=!linechanging; \
if(linechanging) {enter_action;} \
@ -1022,7 +1016,7 @@ void MainMenu::showControlTemp()
switch(i)
{
case ItemCT_exit:
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , LCD_BLOCK;status=Main_Control;beepshort(); ) ;
break;
case ItemCT_nozzle0:
{
@ -1035,7 +1029,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1048,7 +1042,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1070,7 +1064,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1083,7 +1077,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1106,7 +1100,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1119,7 +1113,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1142,7 +1136,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1155,7 +1149,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1176,7 +1170,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1189,7 +1183,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1210,7 +1204,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1223,7 +1217,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1248,7 +1242,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
autotemp_enabled=!autotemp_enabled;
lcd.setCursor(13,line);
@ -1256,7 +1250,7 @@ void MainMenu::showControlTemp()
LCD_PRINT_PGM(MSG_ON);
else
LCD_PRINT_PGM(MSG_OFF);
BLOCK;
LCD_BLOCK;
}
}break;
@ -1273,7 +1267,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1286,7 +1280,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -1301,32 +1295,32 @@ void MainMenu::showControlTemp()
if(force_lcd_update)
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
lcd.setCursor(13,line);lcd.print(ftostr3(fanSpeed));
}
if((activeline!=line) )
break;
if(CLICKED) //nalogWrite(FAN_PIN, fanpwm);
if(LCD_CLICKED) //nalogWrite(FAN_PIN, fanpwm);
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=FanSpeed;
encoderpos=fanSpeed;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>255) encoderpos=255;
FanSpeed=encoderpos;
analogWrite(FAN_PIN, FanSpeed);
fanSpeed=encoderpos;
analogWrite(FAN_PIN, fanSpeed);
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
@ -1343,7 +1337,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1356,7 +1350,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1378,7 +1372,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1391,7 +1385,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1414,7 +1408,7 @@ void MainMenu::showControlTemp()
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1427,7 +1421,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1450,7 +1444,7 @@ void MainMenu::showControlTemp()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1463,7 +1457,7 @@ void MainMenu::showControlTemp()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1478,10 +1472,10 @@ void MainMenu::showControlTemp()
#endif
break;
case ItemCT_PLA_PreHeat_Setting:
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA_SETTINGS) , LCD_BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
break;
case ItemCT_ABS_PreHeat_Setting:
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS_SETTINGS) , LCD_BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
break;
default:
break;
@ -1513,7 +1507,7 @@ void MainMenu::showControlMotion()
switch(i)
{
case ItemCM_exit:
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , LCD_BLOCK;status=Main_Control;beepshort(); ) ;
break;
case ItemCM_acc:
{
@ -1526,7 +1520,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1538,7 +1532,7 @@ void MainMenu::showControlMotion()
acceleration= encoderpos*100;
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1560,7 +1554,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1573,7 +1567,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1603,7 +1597,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1616,7 +1610,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1639,7 +1633,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1652,7 +1646,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1674,7 +1668,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1687,7 +1681,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1717,7 +1711,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1729,7 +1723,7 @@ void MainMenu::showControlMotion()
max_acceleration_units_per_sq_second[i-ItemCM_amaxx]= encoderpos*100;
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1753,7 +1747,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1766,7 +1760,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1788,7 +1782,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1803,7 +1797,7 @@ void MainMenu::showControlMotion()
axis_steps_per_unit[X_AXIS]= encoderpos/100.0;
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1825,7 +1819,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1841,7 +1835,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1863,7 +1857,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1879,7 +1873,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1902,7 +1896,7 @@ void MainMenu::showControlMotion()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -1918,7 +1912,7 @@ void MainMenu::showControlMotion()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -1958,7 +1952,7 @@ void MainMenu::showControlRetract()
switch(i)
{
case ItemR_exit:
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , LCD_BLOCK;status=Main_Control;beepshort(); ) ;
break;
//float retract_length=2, retract_feedrate=1200, retract_zlift=0.4;
@ -1978,7 +1972,7 @@ void MainMenu::showControlRetract()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
autoretract_enabled=!autoretract_enabled;
lcd.setCursor(13,line);
@ -1986,7 +1980,7 @@ void MainMenu::showControlRetract()
LCD_PRINT_PGM(MSG_ON);
else
LCD_PRINT_PGM(MSG_OFF);
BLOCK;
LCD_BLOCK;
}
}break;
@ -2002,7 +1996,7 @@ void MainMenu::showControlRetract()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2015,7 +2009,7 @@ void MainMenu::showControlRetract()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -2037,7 +2031,7 @@ void MainMenu::showControlRetract()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2050,7 +2044,7 @@ void MainMenu::showControlRetract()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -2072,7 +2066,7 @@ void MainMenu::showControlRetract()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2085,7 +2079,7 @@ void MainMenu::showControlRetract()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -2107,7 +2101,7 @@ void MainMenu::showControlRetract()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2120,7 +2114,7 @@ void MainMenu::showControlRetract()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -2143,7 +2137,7 @@ void MainMenu::showControlRetract()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2156,7 +2150,7 @@ void MainMenu::showControlRetract()
encoderpos=activeline*lcdslow;
}
BLOCK;
LCD_BLOCK;
beepshort();
}
if(linechanging)
@ -2196,17 +2190,17 @@ void MainMenu::showControl()
switch(i)
{
case ItemC_exit:
MENUITEM( LCD_PRINT_PGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN_WIDE) , LCD_BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemC_temp:
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_WIDE) , LCD_BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemC_move:
MENUITEM( LCD_PRINT_PGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MOTION_WIDE) , LCD_BLOCK;status=Sub_MotionControl;beepshort(); ) ;
break;
#ifdef FWRETRACT
case ItemC_rectract:
MENUITEM( LCD_PRINT_PGM(MSG_RECTRACT_WIDE) , BLOCK;status=Sub_RetractControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_RECTRACT_WIDE) , LCD_BLOCK;status=Sub_RetractControl;beepshort(); ) ;
break;
#endif
case ItemC_store:
@ -2215,11 +2209,11 @@ void MainMenu::showControl()
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
if((activeline==line) && LCD_CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
LCD_BLOCK;
Config_StoreSettings();
}
}break;
@ -2229,11 +2223,11 @@ void MainMenu::showControl()
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_LOAD_EPROM);
}
if((activeline==line) && CLICKED)
if((activeline==line) && LCD_CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
LCD_BLOCK;
Config_RetrieveSettings();
}
}break;
@ -2243,11 +2237,11 @@ void MainMenu::showControl()
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_RESTORE_FAILSAFE);
}
if((activeline==line) && CLICKED)
if((activeline==line) && LCD_CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
LCD_BLOCK;
Config_ResetDefault();
}
}break;
@ -2288,7 +2282,7 @@ void MainMenu::showSD()
switch(i)
{
case 0:
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , LCD_BLOCK;status=Main_Menu;beepshort(); ) ;
break;
// case 1:
// {
@ -2305,9 +2299,9 @@ void MainMenu::showSD()
// }
//
// }
// if((activeline==line) && CLICKED)
// if((activeline==line) && LCD_CLICKED)
// {
// BLOCK;
// LCD_BLOCK;
// beepshort();
// card.initsd();
// force_lcd_update=true;
@ -2322,7 +2316,7 @@ void MainMenu::showSD()
lcd.print(card.filename);
lcd.print("/..");
} ,
BLOCK;
LCD_BLOCK;
if(SDCARDDETECT == -1) card.initsd();
card.updir();
enforceupdate=true;
@ -2355,9 +2349,9 @@ void MainMenu::showSD()
lcd.print(card.filename);
}
}
if((activeline==line) && CLICKED)
if((activeline==line) && LCD_CLICKED)
{
BLOCK
LCD_BLOCK
card.getfilename(i-FIRSTITEM);
if(card.filenameIsDir)
{
@ -2381,11 +2375,11 @@ void MainMenu::showSD()
if (card.longFilename[0])
{
card.longFilename[LCD_WIDTH-1] = '\0';
lcd_status(card.longFilename);
lcd_setstatus(card.longFilename);
}
else
{
lcd_status(card.filename);
lcd_setstatus(card.filename);
}
}
}
@ -2436,14 +2430,14 @@ void MainMenu::showMainMenu()
switch(i)
{
case ItemM_watch:
MENUITEM( LCD_PRINT_PGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_WATCH) , LCD_BLOCK;status=Main_Status;beepshort(); ) ;
break;
case ItemM_prepare:
MENUITEM( if(!tune) LCD_PRINT_PGM(MSG_PREPARE);else LCD_PRINT_PGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
MENUITEM( if(!tune) LCD_PRINT_PGM(MSG_PREPARE);else LCD_PRINT_PGM(MSG_TUNE); , LCD_BLOCK;status=Main_Prepare;beepshort(); ) ;
break;
case ItemM_control:
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL_ARROW) , LCD_BLOCK;status=Main_Control;beepshort(); ) ;
break;
#ifdef SDSUPPORT
case ItemM_file:
@ -2451,7 +2445,7 @@ void MainMenu::showMainMenu()
if(force_lcd_update)
{
lcd.setCursor(0,line);
if(CARDINSERTED)
if(IS_SD_INSERTED)
{
if(card.sdprinting)
LCD_PRINT_PGM(MSG_STOP_PRINT);
@ -2463,10 +2457,10 @@ void MainMenu::showMainMenu()
LCD_PRINT_PGM(MSG_NO_CARD);
}
}
if(CARDINSERTED&&(activeline==line)&&CLICKED)
if(IS_SD_INSERTED&&(activeline==line) && LCD_CLICKED)
{
card.printingHasFinished();
BLOCK;
LCD_BLOCK;
status=Main_SD;
beepshort();
}
@ -2476,7 +2470,7 @@ void MainMenu::showMainMenu()
if(force_lcd_update)
{
lcd.setCursor(0,line);
if(CARDINSERTED)
if(IS_SD_INSERTED)
{
if(card.sdprinting)
LCD_PRINT_PGM(MSG_PAUSE_PRINT);
@ -2488,7 +2482,7 @@ void MainMenu::showMainMenu()
//LCD_PRINT_PGM(MSG_NO_CARD);
}
}
if(CARDINSERTED && (activeline==line) && CLICKED)
if(IS_SD_INSERTED && (activeline==line) && LCD_CLICKED)
{
if(card.sdprinting)
{
@ -2535,13 +2529,13 @@ void MainMenu::update()
#if (SDCARDDETECT > -1)
//This code is only relivant if you have an SDcard detect pin.
static bool oldcardstatus=false;
if((CARDINSERTED != oldcardstatus))
if((IS_SD_INSERTED != oldcardstatus))
{
force_lcd_update=true;
oldcardstatus=CARDINSERTED;
oldcardstatus=IS_SD_INSERTED;
lcd_init(); // to maybe revive the lcd if static electricty killed it.
//Serial.println("echo: SD CHANGE");
if(CARDINSERTED)
if(IS_SD_INSERTED)
{
card.initsd();
LCD_MESSAGEPGM(MSG_SD_INSERTED);
@ -2562,20 +2556,20 @@ void MainMenu::update()
oldstatus=status;
}
if( (encoderpos!=lastencoderpos) || CLICKED)
timeoutToStatus=millis()+STATUSTIMEOUT;
if( (encoderpos!=lastencoderpos) || LCD_CLICKED)
timeoutToStatus=millis()+LCD_TIMEOUT_TO_STATUS;
switch(status)
{
case Main_Status:
{
showStatus();
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=false;
BLOCK
LCD_BLOCK
status=Main_Menu;
timeoutToStatus=millis()+STATUSTIMEOUT;
timeoutToStatus=millis()+LCD_TIMEOUT_TO_STATUS;
}
}break;
case Main_Menu:
@ -2653,7 +2647,7 @@ void MainMenu::showPLAsettings()
{
case ItemPLAPreHeat_Exit:
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , LCD_BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemPLAPreHeat_set_PLA_FanSpeed:
@ -2667,7 +2661,7 @@ void MainMenu::showPLAsettings()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2679,7 +2673,7 @@ void MainMenu::showPLAsettings()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -2701,7 +2695,7 @@ void MainMenu::showPLAsettings()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2713,7 +2707,7 @@ void MainMenu::showPLAsettings()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -2735,7 +2729,7 @@ void MainMenu::showPLAsettings()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2747,7 +2741,7 @@ void MainMenu::showPLAsettings()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -2763,11 +2757,11 @@ void MainMenu::showPLAsettings()
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
if((activeline==line) && LCD_CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
LCD_BLOCK;
Config_StoreSettings();
}
}break;
@ -2799,7 +2793,7 @@ void MainMenu::showABSsettings()
{
case ItemABSPreHeat_Exit:
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , LCD_BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemABSPreHeat_set_FanSpeed:
@ -2813,7 +2807,7 @@ void MainMenu::showABSsettings()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2825,7 +2819,7 @@ void MainMenu::showABSsettings()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -2847,7 +2841,7 @@ void MainMenu::showABSsettings()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2859,7 +2853,7 @@ void MainMenu::showABSsettings()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -2881,7 +2875,7 @@ void MainMenu::showABSsettings()
if((activeline!=line) )
break;
if(CLICKED)
if(LCD_CLICKED)
{
linechanging=!linechanging;
if(linechanging)
@ -2893,7 +2887,7 @@ void MainMenu::showABSsettings()
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
LCD_BLOCK;
}
if(linechanging)
{
@ -2909,11 +2903,11 @@ void MainMenu::showABSsettings()
{
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
if((activeline==line) && LCD_CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
LCD_BLOCK;
Config_StoreSettings();
}
}break;

136
Marlin/ultralcd.h
Unescape View File

@ -4,38 +4,47 @@
#include "Marlin.h"
#ifdef ULTRA_LCD
#include "language.h"
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
#endif
void lcd_status();
void lcd_init();
void lcd_status(const char* message);
void beep();
void buttons_init();
void buttons_check();
#define LCD_UPDATE_INTERVAL 100
#define STATUSTIMEOUT 15000
extern LCD_CLASS lcd;
extern volatile char buttons; //the last checked buttons in a bit array.
#ifdef NEWPANEL
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
#endif
void lcd_update();
void lcd_init();
void lcd_setstatus(const char* message);
void lcd_setstatuspgm(const char* message);
void lcd_setalertstatuspgm(const char* message);
void lcd_buttons_update();
void lcd_buttons_init();
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
#define LCD_UPDATE_INTERVAL 100
#define LCD_TIMEOUT_TO_STATUS 15000
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
extern int plaPreheatHotendTemp;
extern int plaPreheatHPBTemp;
extern int plaPreheatFanSpeed;
extern int absPreheatHotendTemp;
extern int absPreheatHPBTemp;
extern int absPreheatFanSpeed;
#ifdef NEWPANEL
#define EN_C (1<<BLEN_C)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define CLICKED (buttons&EN_C)
#define BLOCK {blocking=millis()+blocktime;}
#else
#define LCD_CLICKED (buttons&EN_C)
#define LCD_BLOCK {blocking=millis()+blocktime;}
#else
//atomatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
@ -46,28 +55,18 @@ extern volatile char buttons; //the last checked buttons in a bit array.
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define CLICKED ((buttons&B_MI)||(buttons&B_ST))
#define BLOCK {blocking[BL_MI]=millis()+blocktime;blocking[BL_ST]=millis()+blocktime;}
#endif
#define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
#define LCD_BLOCK {blocking[BL_MI]=millis()+blocktime;blocking[BL_ST]=millis()+blocktime;}
#endif
#if (SDCARDDETECT > -1)
#ifdef SDCARDDETECTINVERTED
#define CARDINSERTED (READ(SDCARDDETECT)!=0)
#else
#define CARDINSERTED (READ(SDCARDDETECT)==0)
#endif //SDCARDTETECTINVERTED
#else
//If we don't have a card detect line, aways asume the card is inserted
#define CARDINSERTED true
#endif
// blocking time for recognizing a new keypress of one key, ms
#define blocktime 500
#define lcdslow 5
enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl, Sub_PreheatPLASettings, Sub_PreheatABSSettings};
extern LCD_CLASS lcd;
class MainMenu{
public:
MainMenu();
@ -146,50 +145,29 @@ extern volatile char buttons; //the last checked buttons in a bit array.
}
}
};
//conversion routines, could need some overworking
char *ftostr51(const float &x);
char *ftostr52(const float &x);
char *ftostr31(const float &x);
char *ftostr3(const float &x);
#define LCD_INIT lcd_init();
#define LCD_MESSAGE(x) lcd_status(x);
#define LCD_MESSAGEPGM(x) lcd_statuspgm(PSTR(x));
#define LCD_ALERTMESSAGEPGM(x) lcd_alertstatuspgm(PSTR(x));
#define LCD_STATUS lcd_status()
#else //no lcd
#define LCD_INIT
#define LCD_STATUS
#define LCD_MESSAGE(x)
#define LCD_MESSAGEPGM(x)
#define LCD_ALERTMESSAGEPGM(x)
FORCE_INLINE void lcd_status() {};
FORCE_INLINE void lcd_update() {}
FORCE_INLINE void lcd_init() {}
FORCE_INLINE void lcd_setstatus(const char* message) {}
FORCE_INLINE void lcd_buttons_init() {}
FORCE_INLINE void lcd_buttons_update() {}
#define LCD_MESSAGEPGM(x)
#define LCD_ALERTMESSAGEPGM(x)
#define CLICKED false
#define BLOCK ;
#endif
void lcd_statuspgm(const char* message);
void lcd_alertstatuspgm(const char* message);
char *ftostr3(const float &x);
char *itostr2(const uint8_t &x);
char *ftostr31(const float &x);
char *ftostr32(const float &x);
char *itostr31(const int &xx);
char *itostr3(const int &xx);
char *itostr4(const int &xx);
char *ftostr51(const float &x);
//TODO: These do not belong here.
extern int plaPreheatHotendTemp;
extern int plaPreheatHPBTemp;
extern int plaPreheatFanSpeed;
extern int absPreheatHotendTemp;
extern int absPreheatHPBTemp;
extern int absPreheatFanSpeed;
char *ftostr3(const float &x);
char *ftostr31(const float &x);
char *ftostr32(const float &x);
char *ftostr51(const float &x);
char *ftostr52(const float &x);
#endif //ULTRALCD

Write Preview
Loading…
Cancel
Save