Patch issue #2315

Marlin/ultralcd.cpp

@@ -475,53 +475,51 @@ void lcd_set_home_offsets() {
 #endif //BABYSTEPPING
 
 /**
- *
+ * Watch temperature callbacks
- * "Tune" submenu
- *
  */
+#if TEMP_SENSOR_0 != 0
+  void watch_temp_callback_E0() { start_watching_heater(0); }
+#endif
+#if EXTRUDERS > 1 && TEMP_SENSOR_1 != 0
+  void watch_temp_callback_E1() { start_watching_heater(1); }
+  #if EXTRUDERS > 2 && TEMP_SENSOR_2 != 0
+    void watch_temp_callback_E2() { start_watching_heater(2); }
+    #if EXTRUDERS > 3 && TEMP_SENSOR_3 != 0
+      void watch_temp_callback_E3() { start_watching_heater(3); }
+    #endif // EXTRUDERS > 3
+  #endif // EXTRUDERS > 2
+#endif // EXTRUDERS > 1
 
-static void lcd_tune_menu() {
+/**
-  START_MENU();
+ * Items shared between Tune and Temperature menus
-
+ */
-  //
+static void nozzle_bed_fan_menu_items(uint8_t &encoderLine, uint8_t &_lineNr, uint8_t &_drawLineNr, uint8_t &_menuItemNr, bool &wasClicked, bool &itemSelected) {
-  // ^ Main
-  //
-  MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
-
-  //
-  // Speed:
-  //
-  MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_multiplier, 10, 999);
-
   //
   // Nozzle:
-  // Nozzle 1:
+  // Nozzle [1-4]:
-  // Nozzle 2:
-  // Nozzle 3:
-  // Nozzle 4:
   //
   #if EXTRUDERS == 1
     #if TEMP_SENSOR_0 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
     #endif
   #else //EXTRUDERS > 1
     #if TEMP_SENSOR_0 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
     #endif
     #if TEMP_SENSOR_1 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
+      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
     #endif
     #if EXTRUDERS > 2
       #if TEMP_SENSOR_2 != 0
-        MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N3, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
+        MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
       #endif
       #if EXTRUDERS > 3
         #if TEMP_SENSOR_3 != 0
-          MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N4, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
+          MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
         #endif
-      #endif //EXTRUDERS > 3
+      #endif // EXTRUDERS > 3
-    #endif //EXTRUDERS > 2
+    #endif // EXTRUDERS > 2
-  #endif //EXTRUDERS > 1
+  #endif // EXTRUDERS > 1
 
   //
   // Bed:
@@ -534,11 +532,29 @@ static void lcd_tune_menu() {
   // Fan Speed:
   //
   MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+}
+
+
+/**
+ *
+ * "Tune" submenu
+ *
+ */
+static void lcd_tune_menu() {
+  START_MENU();
 
   //
-  // Flow:
+  // ^ Main
+  //
+  MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
+
+  //
+  // Speed:
   //
-  MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[active_extruder], 10, 999);
+  MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_multiplier, 10, 999);
+
+  // Nozzle, Bed, and Fan Control
+  nozzle_bed_fan_menu_items(encoderLine, _lineNr, _drawLineNr, _menuItemNr, wasClicked, itemSelected);
 
   //
   // Flow:
@@ -550,6 +566,7 @@ static void lcd_tune_menu() {
   #if EXTRUDERS == 1
     MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[0], 10, 999);
   #else // EXTRUDERS > 1
+    MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[active_extruder], 10, 999);
     MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N1, &extruder_multiplier[0], 10, 999);
     MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N2, &extruder_multiplier[1], 10, 999);
     #if EXTRUDERS > 2
@@ -1002,44 +1019,8 @@ static void lcd_control_temperature_menu() {
   //
   MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
 
-  //
+  // Nozzle, Bed, and Fan Control
-  // Nozzle
+  nozzle_bed_fan_menu_items(encoderLine, _lineNr, _drawLineNr, _menuItemNr, wasClicked, itemSelected);
-  // Nozzle 1, Nozzle 2, Nozzle 3, Nozzle 4
-  //
-  #if EXTRUDERS == 1
-    #if TEMP_SENSOR_0 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
-    #endif
-  #else //EXTRUDERS > 1
-    #if TEMP_SENSOR_0 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
-    #endif
-    #if TEMP_SENSOR_1 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
-    #endif
-    #if EXTRUDERS > 2
-      #if TEMP_SENSOR_2 != 0
-        MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N3, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
-      #endif
-      #if EXTRUDERS > 3
-        #if TEMP_SENSOR_3 != 0
-          MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N4, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
-        #endif
-      #endif // EXTRUDERS > 3
-    #endif // EXTRUDERS > 2
-  #endif // EXTRUDERS > 1
-
-  //
-  // Bed
-  //
-  #if TEMP_SENSOR_BED != 0
-    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
-  #endif
-
-  //
-  // Fan Speed
-  //
-  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
 
   //
   // Autotemp, Min, Max, Fact