Clean up serial out code

master
Scott Lahteine 8 years ago
parent 0e38bea79d
commit 788a16fc46

@ -764,8 +764,7 @@ void enqueue_and_echo_command_now(const char* cmd) {
bool enqueue_and_echo_command(const char* cmd, bool say_ok/*=false*/) { bool enqueue_and_echo_command(const char* cmd, bool say_ok/*=false*/) {
if (_enqueuecommand(cmd, say_ok)) { if (_enqueuecommand(cmd, say_ok)) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_Enqueueing); SERIAL_ECHOPAIR(MSG_Enqueueing, cmd);
SERIAL_ECHO(cmd);
SERIAL_ECHOLNPGM("\""); SERIAL_ECHOLNPGM("\"");
return true; return true;
} }
@ -1354,8 +1353,8 @@ static void set_axis_is_at_home(AxisEnum axis) {
float homeposition[XYZ]; float homeposition[XYZ];
LOOP_XYZ(i) homeposition[i] = LOGICAL_POSITION(base_home_pos(i), i); LOOP_XYZ(i) homeposition[i] = LOGICAL_POSITION(base_home_pos(i), i);
// SERIAL_ECHOPGM("homeposition[x]= "); SERIAL_ECHO(homeposition[0]); // SERIAL_ECHOPAIR("homeposition X:", homeposition[X_AXIS]);
// SERIAL_ECHOPGM("homeposition[y]= "); SERIAL_ECHOLN(homeposition[1]); // SERIAL_ECHOLNPAIR(" Y:", homeposition[Y_AXIS]);
/** /**
* Works out real Homeposition angles using inverse kinematics, * Works out real Homeposition angles using inverse kinematics,
@ -1364,8 +1363,8 @@ static void set_axis_is_at_home(AxisEnum axis) {
inverse_kinematics(homeposition); inverse_kinematics(homeposition);
forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]); forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]);
// SERIAL_ECHOPAIR("Delta X=", cartes[X_AXIS]); // SERIAL_ECHOPAIR("Cartesian X:", cartes[X_AXIS]);
// SERIAL_ECHOPGM(" Delta Y="); SERIAL_ECHOLN(cartes[Y_AXIS]); // SERIAL_ECHOLNPAIR(" Y:", cartes[Y_AXIS]);
current_position[axis] = LOGICAL_POSITION(cartes[axis], axis); current_position[axis] = LOGICAL_POSITION(cartes[axis], axis);
@ -2019,17 +2018,11 @@ static void clean_up_after_endstop_or_probe_move() {
feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S; feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S;
do_blocking_move_to_xy(x - (X_PROBE_OFFSET_FROM_EXTRUDER), y - (Y_PROBE_OFFSET_FROM_EXTRUDER)); do_blocking_move_to_xy(x - (X_PROBE_OFFSET_FROM_EXTRUDER), y - (Y_PROBE_OFFSET_FROM_EXTRUDER));
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
#endif
if (DEPLOY_PROBE()) return NAN; if (DEPLOY_PROBE()) return NAN;
float measured_z = run_z_probe(); float measured_z = run_z_probe();
if (stow) { if (stow) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
#endif
if (STOW_PROBE()) return NAN; if (STOW_PROBE()) return NAN;
} }
else { else {
@ -2203,12 +2196,7 @@ static void homeaxis(AxisEnum axis) {
// Homing Z towards the bed? Deploy the Z probe or endstop. // Homing Z towards the bed? Deploy the Z probe or endstop.
#if HOMING_Z_WITH_PROBE #if HOMING_Z_WITH_PROBE
if (axis == Z_AXIS) { if (axis == Z_AXIS && DEPLOY_PROBE()) return;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
#endif
if (DEPLOY_PROBE()) return;
}
#endif #endif
// Set a flag for Z motor locking // Set a flag for Z motor locking
@ -2286,12 +2274,7 @@ static void homeaxis(AxisEnum axis) {
// Put away the Z probe // Put away the Z probe
#if HOMING_Z_WITH_PROBE #if HOMING_Z_WITH_PROBE
if (axis == Z_AXIS) { if (axis == Z_AXIS && STOW_PROBE()) return;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
#endif
if (STOW_PROBE()) return;
}
#endif #endif
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
@ -2416,8 +2399,7 @@ void gcode_get_destination() {
void unknown_command_error() { void unknown_command_error() {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, current_command);
SERIAL_ECHO(current_command);
SERIAL_ECHOLNPGM("\""); SERIAL_ECHOLNPGM("\"");
} }
@ -3713,10 +3695,7 @@ inline void gcode_G28() {
#ifdef Z_PROBE_END_SCRIPT #ifdef Z_PROBE_END_SCRIPT
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
SERIAL_ECHOPGM("Z Probe End Script: ");
SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT);
}
#endif #endif
enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT)); enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT));
stepper.synchronize(); stepper.synchronize();
@ -4002,8 +3981,7 @@ inline void gcode_M31() {
lcd_setstatus(buffer); lcd_setstatus(buffer);
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM("Print time: "); SERIAL_ECHOLNPAIR("Print time: ", buffer);
SERIAL_ECHOLN(buffer);
thermalManager.autotempShutdown(); thermalManager.autotempShutdown();
} }
@ -5358,8 +5336,7 @@ inline void gcode_M206() {
endstop_adj[i] = code_value_axis_units(i); endstop_adj[i] = code_value_axis_units(i);
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPGM("endstop_adj["); SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]);
SERIAL_ECHO(axis_codes[i]);
SERIAL_ECHOLNPAIR("] = ", endstop_adj[i]); SERIAL_ECHOLNPAIR("] = ", endstop_adj[i]);
} }
#endif #endif
@ -5442,16 +5419,17 @@ inline void gcode_M211() {
if (code_seen('S')) soft_endstops_enabled = code_value_bool(); if (code_seen('S')) soft_endstops_enabled = code_value_bool();
#endif #endif
#if ENABLED(min_software_endstops) || ENABLED(max_software_endstops) #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS ": "); SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS);
serialprintPGM(soft_endstops_enabled ? PSTR(MSG_ON) : PSTR(MSG_OFF)); serialprintPGM(soft_endstops_enabled ? PSTR(MSG_ON) : PSTR(MSG_OFF));
#else #else
SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS ": " MSG_OFF); SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS);
SERIAL_ECHOPGM(MSG_OFF);
#endif #endif
SERIAL_ECHOPGM(" " MSG_SOFT_MIN ": "); SERIAL_ECHOPGM(MSG_SOFT_MIN);
SERIAL_ECHOPAIR( MSG_X, soft_endstop_min[X_AXIS]); SERIAL_ECHOPAIR( MSG_X, soft_endstop_min[X_AXIS]);
SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_min[Y_AXIS]); SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_min[Y_AXIS]);
SERIAL_ECHOPAIR(" " MSG_Z, soft_endstop_min[Z_AXIS]); SERIAL_ECHOPAIR(" " MSG_Z, soft_endstop_min[Z_AXIS]);
SERIAL_ECHOPGM(" " MSG_SOFT_MAX ": "); SERIAL_ECHOPGM(MSG_SOFT_MAX);
SERIAL_ECHOPAIR( MSG_X, soft_endstop_max[X_AXIS]); SERIAL_ECHOPAIR( MSG_X, soft_endstop_max[X_AXIS]);
SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_max[Y_AXIS]); SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_max[Y_AXIS]);
SERIAL_ECHOLNPAIR(" " MSG_Z, soft_endstop_max[Z_AXIS]); SERIAL_ECHOLNPAIR(" " MSG_Z, soft_endstop_max[Z_AXIS]);
@ -5569,17 +5547,14 @@ inline void gcode_M226() {
MOVE_SERVO(servo_index, code_value_int()); MOVE_SERVO(servo_index, code_value_int());
else { else {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(" Servo "); SERIAL_ECHOPAIR(" Servo ", servo_index);
SERIAL_ECHO(servo_index); SERIAL_ECHOLNPAIR(": ", servo[servo_index].read());
SERIAL_ECHOPGM(": ");
SERIAL_ECHOLN(servo[servo_index].read());
} }
} }
else { else {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERROR("Servo "); SERIAL_ECHOPAIR("Servo ", servo_index);
SERIAL_ERROR(servo_index); SERIAL_ECHOLNPGM(" out of range");
SERIAL_ERRORLN(" out of range");
} }
} }
@ -5635,19 +5610,14 @@ inline void gcode_M226() {
thermalManager.updatePID(); thermalManager.updatePID();
SERIAL_ECHO_START; SERIAL_ECHO_START;
#if ENABLED(PID_PARAMS_PER_HOTEND) #if ENABLED(PID_PARAMS_PER_HOTEND)
SERIAL_ECHOPGM(" e:"); // specify extruder in serial output SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
SERIAL_ECHO(e);
#endif // PID_PARAMS_PER_HOTEND #endif // PID_PARAMS_PER_HOTEND
SERIAL_ECHOPGM(" p:"); SERIAL_ECHOPAIR(" p:", PID_PARAM(Kp, e));
SERIAL_ECHO(PID_PARAM(Kp, e)); SERIAL_ECHOPAIR(" i:", unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_ECHOPGM(" i:"); SERIAL_ECHOPAIR(" d:", unscalePID_d(PID_PARAM(Kd, e)));
SERIAL_ECHO(unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_ECHOPGM(" d:");
SERIAL_ECHO(unscalePID_d(PID_PARAM(Kd, e)));
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPGM(" c:");
//Kc does not have scaling applied above, or in resetting defaults //Kc does not have scaling applied above, or in resetting defaults
SERIAL_ECHO(PID_PARAM(Kc, e)); SERIAL_ECHOPAIR(" c:", PID_PARAM(Kc, e));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
} }
@ -5669,12 +5639,9 @@ inline void gcode_M226() {
thermalManager.updatePID(); thermalManager.updatePID();
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(" p:"); SERIAL_ECHOPAIR(" p:", thermalManager.bedKp);
SERIAL_ECHO(thermalManager.bedKp); SERIAL_ECHOPAIR(" i:", unscalePID_i(thermalManager.bedKi));
SERIAL_ECHOPGM(" i:"); SERIAL_ECHOLNPAIR(" d:", unscalePID_d(thermalManager.bedKd));
SERIAL_ECHO(unscalePID_i(thermalManager.bedKi));
SERIAL_ECHOPGM(" d:");
SERIAL_ECHOLN(unscalePID_d(thermalManager.bedKd));
} }
#endif // PIDTEMPBED #endif // PIDTEMPBED
@ -6138,11 +6105,9 @@ inline void gcode_M503() {
SERIAL_ECHO(zprobe_zoffset); SERIAL_ECHO(zprobe_zoffset);
} }
else { else {
SERIAL_ECHOPGM(MSG_Z_MIN); SERIAL_ECHOPAIR(MSG_Z_MIN, Z_PROBE_OFFSET_RANGE_MIN);
SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MIN);
SERIAL_CHAR(' '); SERIAL_CHAR(' ');
SERIAL_ECHOPGM(MSG_Z_MAX); SERIAL_ECHOPAIR(MSG_Z_MAX, Z_PROBE_OFFSET_RANGE_MAX);
SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MAX);
} }
} }
else { else {
@ -6863,8 +6828,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif // HOTENDS <= 1 #endif // HOTENDS <= 1
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_ACTIVE_EXTRUDER); SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder);
SERIAL_PROTOCOLLN((int)active_extruder);
#endif //!MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1 #endif //!MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
} }
@ -7685,13 +7649,13 @@ void ok_to_send() {
- sq(delta_tower3_y - cartesian[Y_AXIS]) - sq(delta_tower3_y - cartesian[Y_AXIS])
) + cartesian[Z_AXIS]; ) + cartesian[Z_AXIS];
/** /**
SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); SERIAL_ECHOPAIR("cartesian x=", cartesian[X_AXIS]);
SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); SERIAL_ECHOPAIR(" y=", cartesian[Y_AXIS]);
SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); SERIAL_ECHOLNPAIR(" z=", cartesian[Z_AXIS]);
SERIAL_ECHOPGM("delta a="); SERIAL_ECHO(delta[A_AXIS]); SERIAL_ECHOPAIR("delta a=", delta[A_AXIS]);
SERIAL_ECHOPGM(" b="); SERIAL_ECHO(delta[B_AXIS]); SERIAL_ECHOPAIR(" b=", delta[B_AXIS]);
SERIAL_ECHOPGM(" c="); SERIAL_ECHOLN(delta[C_AXIS]); SERIAL_ECHOLNPAIR(" c=", delta[C_AXIS]);
*/ */
} }
@ -7806,19 +7770,19 @@ void ok_to_send() {
delta[Z_AXIS] += offset; delta[Z_AXIS] += offset;
/** /**
SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x); SERIAL_ECHOPAIR("grid_x=", grid_x);
SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y); SERIAL_ECHOPAIR(" grid_y=", grid_y);
SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x); SERIAL_ECHOPAIR(" floor_x=", floor_x);
SERIAL_ECHOPGM(" floor_y="); SERIAL_ECHO(floor_y); SERIAL_ECHOPAIR(" floor_y=", floor_y);
SERIAL_ECHOPGM(" ratio_x="); SERIAL_ECHO(ratio_x); SERIAL_ECHOPAIR(" ratio_x=", ratio_x);
SERIAL_ECHOPGM(" ratio_y="); SERIAL_ECHO(ratio_y); SERIAL_ECHOPAIR(" ratio_y=", ratio_y);
SERIAL_ECHOPGM(" z1="); SERIAL_ECHO(z1); SERIAL_ECHOPAIR(" z1=", z1);
SERIAL_ECHOPGM(" z2="); SERIAL_ECHO(z2); SERIAL_ECHOPAIR(" z2=", z2);
SERIAL_ECHOPGM(" z3="); SERIAL_ECHO(z3); SERIAL_ECHOPAIR(" z3=", z3);
SERIAL_ECHOPGM(" z4="); SERIAL_ECHO(z4); SERIAL_ECHOPAIR(" z4=", z4);
SERIAL_ECHOPGM(" left="); SERIAL_ECHO(left); SERIAL_ECHOPAIR(" left=", left);
SERIAL_ECHOPGM(" right="); SERIAL_ECHO(right); SERIAL_ECHOPAIR(" right=", right);
SERIAL_ECHOPGM(" offset="); SERIAL_ECHOLN(offset); SERIAL_ECHOLNPAIR(" offset=", offset);
*/ */
} }
#endif // AUTO_BED_LEVELING_NONLINEAR #endif // AUTO_BED_LEVELING_NONLINEAR
@ -7910,9 +7874,9 @@ void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_
int steps = max(1, int(delta_segments_per_second * seconds)); int steps = max(1, int(delta_segments_per_second * seconds));
float inv_steps = 1.0/steps; float inv_steps = 1.0/steps;
// SERIAL_ECHOPGM("mm="); SERIAL_ECHO(cartesian_mm); // SERIAL_ECHOPAIR("mm=", cartesian_mm);
// SERIAL_ECHOPGM(" seconds="); SERIAL_ECHO(seconds); // SERIAL_ECHOPAIR(" seconds=", seconds);
// SERIAL_ECHOPGM(" steps="); SERIAL_ECHOLN(steps); // SERIAL_ECHOLNPAIR(" steps=", steps);
for (int s = 1; s <= steps; s++) { for (int s = 1; s <= steps; s++) {
@ -8263,24 +8227,24 @@ void prepare_move_to_destination() {
float a_sin, a_cos, b_sin, b_cos; float a_sin, a_cos, b_sin, b_cos;
//SERIAL_ECHOPGM("f_delta x="); SERIAL_ECHO(a);
//SERIAL_ECHOPGM(" y="); SERIAL_ECHO(b);
a_sin = sin(RADIANS(a)) * L1; a_sin = sin(RADIANS(a)) * L1;
a_cos = cos(RADIANS(a)) * L1; a_cos = cos(RADIANS(a)) * L1;
b_sin = sin(RADIANS(b)) * L2; b_sin = sin(RADIANS(b)) * L2;
b_cos = cos(RADIANS(b)) * L2; b_cos = cos(RADIANS(b)) * L2;
//SERIAL_ECHOPGM(" a_sin="); SERIAL_ECHO(a_sin);
//SERIAL_ECHOPGM(" a_cos="); SERIAL_ECHO(a_cos);
//SERIAL_ECHOPGM(" b_sin="); SERIAL_ECHO(b_sin);
//SERIAL_ECHOPGM(" b_cos="); SERIAL_ECHOLN(b_cos);
cartes[X_AXIS] = a_cos + b_cos + SCARA_OFFSET_X; //theta cartes[X_AXIS] = a_cos + b_cos + SCARA_OFFSET_X; //theta
cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi
//SERIAL_ECHOPGM(" cartes[X_AXIS]="); SERIAL_ECHO(cartes[X_AXIS]); /*
//SERIAL_ECHOPGM(" cartes[Y_AXIS]="); SERIAL_ECHOLN(cartes[Y_AXIS]); SERIAL_ECHOPAIR("f_delta x=", a);
SERIAL_ECHOPAIR(" y=", b);
SERIAL_ECHOPAIR(" a_sin=", a_sin);
SERIAL_ECHOPAIR(" a_cos=", a_cos);
SERIAL_ECHOPAIR(" b_sin=", b_sin);
SERIAL_ECHOLNPAIR(" b_cos=", b_cos);
SERIAL_ECHOPAIR(" cartes[X_AXIS]=", cartes[X_AXIS]);
SERIAL_ECHOLNPAIR(" cartes[Y_AXIS]=", cartes[Y_AXIS]);
//*/
} }
void inverse_kinematics(const float cartesian[XYZ]) { void inverse_kinematics(const float cartesian[XYZ]) {
@ -8771,25 +8735,21 @@ void setup() {
MCUSR = 0; MCUSR = 0;
SERIAL_ECHOPGM(MSG_MARLIN); SERIAL_ECHOPGM(MSG_MARLIN);
SERIAL_ECHOLNPGM(" " SHORT_BUILD_VERSION); SERIAL_CHAR(' ');
SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION);
SERIAL_EOL;
#ifdef STRING_DISTRIBUTION_DATE #if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR)
#ifdef STRING_CONFIG_H_AUTHOR SERIAL_ECHO_START;
SERIAL_ECHO_START; SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
SERIAL_ECHOPGM(MSG_CONFIGURATION_VER); SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE);
SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE); SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR);
SERIAL_ECHOPGM(MSG_AUTHOR); SERIAL_ECHOLNPGM("Compiled: " __DATE__);
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR); #endif
SERIAL_ECHOPGM("Compiled: ");
SERIAL_ECHOLNPGM(__DATE__);
#endif // STRING_CONFIG_H_AUTHOR
#endif // STRING_DISTRIBUTION_DATE
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_FREE_MEMORY); SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory());
SERIAL_ECHO(freeMemory()); SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES);
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
// Send "ok" after commands by default // Send "ok" after commands by default
for (int8_t i = 0; i < BUFSIZE; i++) send_ok[i] = true; for (int8_t i = 0; i < BUFSIZE; i++) send_ok[i] = true;

@ -157,9 +157,9 @@
#define MSG_ENDSTOP_OPEN "open" #define MSG_ENDSTOP_OPEN "open"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_DUPLICATION_MODE "Duplication mode: " #define MSG_DUPLICATION_MODE "Duplication mode: "
#define MSG_SOFT_ENDSTOPS "Soft endstops" #define MSG_SOFT_ENDSTOPS "Soft endstops: "
#define MSG_SOFT_MIN "Min" #define MSG_SOFT_MIN " Min: "
#define MSG_SOFT_MAX "Max" #define MSG_SOFT_MAX " Max: "
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir " #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir "
#define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_INIT_FAIL "SD init fail"

Loading…
Cancel
Save