Fix up bed leveling code

- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
master
Scott Lahteine 10 years ago
parent c2ba5d0c09
commit 96b5da7198

@ -11,7 +11,7 @@
* max_acceleration_units_per_sq_second (x4)
* acceleration
* retract_acceleration
* travel_aceeleration
* travel_acceleration
* minimumfeedrate
* mintravelfeedrate
* minsegmenttime

@ -255,7 +255,7 @@ float home_offset[3] = { 0, 0, 0 };
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
bool axis_known_position[3] = { false, false, false };
float zprobe_zoffset;
float zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
// Extruder offset
#if EXTRUDERS > 1
@ -1092,9 +1092,6 @@ static void set_bed_level_equation_lsq(double *plane_equation_coefficients)
current_position[Y_AXIS] = corrected_position.y;
current_position[Z_AXIS] = corrected_position.z;
// put the bed at 0 so we don't go below it.
current_position[Z_AXIS] = zprobe_zoffset; // in the lsq we reach here after raising the extruder due to the loop structure
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
}
#endif
@ -1121,9 +1118,6 @@ static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float
current_position[Y_AXIS] = corrected_position.y;
current_position[Z_AXIS] = corrected_position.z;
// put the bed at 0 so we don't go below it.
current_position[Z_AXIS] = zprobe_zoffset;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
}
@ -2010,8 +2004,19 @@ inline void gcode_G28() {
endstops_hit_on_purpose();
}
#if defined(MESH_BED_LEVELING)
#ifdef MESH_BED_LEVELING
/**
* G29: Mesh-based Z-Probe, probes a grid and produces a
* mesh to compensate for variable bed height
*
* Parameters With MESH_BED_LEVELING:
*
* S0 Produce a mesh report
* S1 Start probing mesh points
* S2 Probe the next mesh point
*
*/
inline void gcode_G29() {
static int probe_point = -1;
int state = 0;
@ -2053,7 +2058,7 @@ inline void gcode_G28() {
} else if (state == 2) { // Goto next point
if (probe_point < 0) {
SERIAL_PROTOCOLPGM("Mesh probing not started.\n");
SERIAL_PROTOCOLPGM("Start mesh probing with \"G29 S1\" first.\n");
return;
}
int ix, iy;
@ -2063,16 +2068,14 @@ inline void gcode_G28() {
} else {
ix = (probe_point-1) % MESH_NUM_X_POINTS;
iy = (probe_point-1) / MESH_NUM_X_POINTS;
if (iy&1) { // Zig zag
ix = (MESH_NUM_X_POINTS - 1) - ix;
}
if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag
mbl.set_z(ix, iy, current_position[Z_AXIS]);
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
st_synchronize();
}
if (probe_point == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS) {
SERIAL_PROTOCOLPGM("Mesh done.\n");
if (probe_point == MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS) {
SERIAL_PROTOCOLPGM("Mesh probing done.\n");
probe_point = -1;
mbl.active = 1;
enquecommands_P(PSTR("G28"));
@ -2080,9 +2083,7 @@ inline void gcode_G28() {
}
ix = probe_point % MESH_NUM_X_POINTS;
iy = probe_point / MESH_NUM_X_POINTS;
if (iy&1) { // Zig zag
ix = (MESH_NUM_X_POINTS - 1) - ix;
}
if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag
current_position[X_AXIS] = mbl.get_x(ix);
current_position[Y_AXIS] = mbl.get_y(iy);
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
@ -2091,9 +2092,7 @@ inline void gcode_G28() {
}
}
#endif
#ifdef ENABLE_AUTO_BED_LEVELING
#elif defined(ENABLE_AUTO_BED_LEVELING)
/**
* G29: Detailed Z-Probe, probes the bed at 3 or more points.
@ -2210,7 +2209,7 @@ inline void gcode_G28() {
#ifdef Z_PROBE_SLED
dock_sled(false); // engage (un-dock) the probe
#elif defined(Z_PROBE_ALLEN_KEY)
#elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING)
engage_z_probe();
#endif
@ -2218,9 +2217,8 @@ inline void gcode_G28() {
#ifdef DELTA
reset_bed_level();
#else
// make sure the bed_level_rotation_matrix is identity or the planner will get it incorectly
#else //!DELTA
// make sure the bed_level_rotation_matrix is identity or the planner will get it wrong
//vector_3 corrected_position = plan_get_position_mm();
//corrected_position.debug("position before G29");
plan_bed_level_matrix.set_to_identity();
@ -2230,7 +2228,7 @@ inline void gcode_G28() {
current_position[Y_AXIS] = uncorrected_position.y;
current_position[Z_AXIS] = uncorrected_position.z;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
#endif
#endif //!DELTA
setup_for_endstop_move();
@ -2242,7 +2240,12 @@ inline void gcode_G28() {
const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points-1);
const int yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points-1);
#ifndef DELTA
#ifdef DELTA
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
float z_offset = Z_PROBE_OFFSET_FROM_EXTRUDER;
if (code_seen(axis_codes[Z_AXIS])) z_offset += code_value();
#else // !DELTA
// solve the plane equation ax + by + d = z
// A is the matrix with rows [x y 1] for all the probed points
// B is the vector of the Z positions
@ -2254,14 +2257,7 @@ inline void gcode_G28() {
double eqnAMatrix[abl2 * 3], // "A" matrix of the linear system of equations
eqnBVector[abl2], // "B" vector of Z points
mean = 0.0;
#else
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
float z_offset = Z_PROBE_OFFSET_FROM_EXTRUDER;
if (code_seen(axis_codes[Z_AXIS])) z_offset += code_value();
#endif
#endif // !DELTA
int probePointCounter = 0;
bool zig = true;
@ -2333,7 +2329,10 @@ inline void gcode_G28() {
clean_up_after_endstop_move();
#ifndef DELTA
#ifdef DELTA
extrapolate_unprobed_bed_level();
print_bed_level();
#else // !DELTA
// solve lsq problem
double *plane_equation_coefficients = qr_solve(abl2, 3, eqnAMatrix, eqnBVector);
@ -2383,10 +2382,8 @@ inline void gcode_G28() {
set_bed_level_equation_lsq(plane_equation_coefficients);
free(plane_equation_coefficients);
#else
extrapolate_unprobed_bed_level();
print_bed_level();
#endif
#endif // !DELTA
#else // !AUTO_BED_LEVELING_GRID
@ -2428,7 +2425,7 @@ inline void gcode_G28() {
#ifdef Z_PROBE_SLED
dock_sled(true, -SLED_DOCKING_OFFSET); // dock the probe, correcting for over-travel
#elif defined(Z_PROBE_ALLEN_KEY)
#elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING)
retract_z_probe();
#endif

@ -1,20 +1,16 @@
#include "mesh_bed_leveling.h"
#if defined(MESH_BED_LEVELING)
#ifdef MESH_BED_LEVELING
mesh_bed_leveling mbl;
mesh_bed_leveling mbl;
mesh_bed_leveling::mesh_bed_leveling() {
reset();
}
mesh_bed_leveling::mesh_bed_leveling() { reset(); }
void mesh_bed_leveling::reset() {
for (int y=0; y<MESH_NUM_Y_POINTS; y++) {
for (int x=0; x<MESH_NUM_X_POINTS; x++) {
void mesh_bed_leveling::reset() {
active = 0;
for (int y = 0; y < MESH_NUM_Y_POINTS; y++)
for (int x = 0; x < MESH_NUM_X_POINTS; x++)
z_values[y][x] = 0;
}
}
active = 0;
}
#endif // MESH_BED_LEVELING

@ -2,11 +2,11 @@
#if defined(MESH_BED_LEVELING)
#define MESH_X_DIST ((MESH_MAX_X - MESH_MIN_X)/(MESH_NUM_X_POINTS - 1))
#define MESH_Y_DIST ((MESH_MAX_Y - MESH_MIN_Y)/(MESH_NUM_Y_POINTS - 1))
#define MESH_X_DIST ((MESH_MAX_X - MESH_MIN_X)/(MESH_NUM_X_POINTS - 1))
#define MESH_Y_DIST ((MESH_MAX_Y - MESH_MIN_Y)/(MESH_NUM_Y_POINTS - 1))
class mesh_bed_leveling {
public:
class mesh_bed_leveling {
public:
uint8_t active;
float z_values[MESH_NUM_Y_POINTS][MESH_NUM_X_POINTS];
@ -14,24 +14,20 @@ public:
void reset();
float get_x(int i) { return MESH_MIN_X + MESH_X_DIST*i; }
float get_y(int i) { return MESH_MIN_Y + MESH_Y_DIST*i; }
float get_x(int i) { return MESH_MIN_X + MESH_X_DIST * i; }
float get_y(int i) { return MESH_MIN_Y + MESH_Y_DIST * i; }
void set_z(int ix, int iy, float z) { z_values[iy][ix] = z; }
int select_x_index(float x) {
int i = 1;
while (x > get_x(i) && i < MESH_NUM_X_POINTS-1) {
i++;
}
return i-1;
while (x > get_x(i) && i < MESH_NUM_X_POINTS-1) i++;
return i - 1;
}
int select_y_index(float y) {
int i = 1;
while (y > get_y(i) && i < MESH_NUM_Y_POINTS-1) {
i++;
}
return i-1;
while (y > get_y(i) && i < MESH_NUM_Y_POINTS - 1) i++;
return i - 1;
}
float calc_z0(float a0, float a1, float z1, float a2, float z2) {
@ -54,8 +50,8 @@ public:
get_y(y_index+1), z2);
return z0;
}
};
};
extern mesh_bed_leveling mbl;
extern mesh_bed_leveling mbl;
#endif // MESH_BED_LEVELING

Loading…
Cancel
Save