Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks

Cleanup of M48

Marlin/Marlin_main.cpp

@@ -3516,22 +3516,16 @@ inline void gcode_G28() {
           float measured_z,
                 z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING + home_offset[Z_AXIS];
 
-          if (probePointCounter) {
           #if ENABLED(DEBUG_LEVELING_FEATURE)
             if (DEBUGGING(LEVELING)) {
-                SERIAL_ECHOPAIR("z_before = (between) ", (Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
+              SERIAL_ECHOPGM("z_before = (");
-                SERIAL_EOL;
+              if (probePointCounter)
-              }
+                SERIAL_ECHOPGM("between) ");
-            #endif
+              else
-          }
+                SERIAL_ECHOPGM("before) ");
-          else {
+              SERIAL_ECHOLN(z_before);
-            #if ENABLED(DEBUG_LEVELING_FEATURE)
-              if (DEBUGGING(LEVELING)) {
-                SERIAL_ECHOPAIR("z_before = (before) ", Z_RAISE_BEFORE_PROBING + home_offset[Z_AXIS]);
-                SERIAL_EOL;
             }
           #endif
-          }
 
           #if ENABLED(DELTA)
             // Avoid probing the corners (outside the round or hexagon print surface) on a delta printer.
@@ -4199,57 +4193,41 @@ inline void gcode_M42() {
       return;
     }
 
-    double sum = 0.0, mean = 0.0, sigma = 0.0, sample_set[50];
+    int8_t verbose_level = code_seen('V') ? code_value_byte() : 1;
-    int8_t verbose_level = 1, n_samples = 10, n_legs = 0, schizoid_flag = 0;
-
-    if (code_seen('V')) {
-      verbose_level = code_value_byte();
     if (verbose_level < 0 || verbose_level > 4) {
       SERIAL_PROTOCOLPGM("?Verbose Level not plausible (0-4).\n");
       return;
     }
-    }
 
     if (verbose_level > 0)
       SERIAL_PROTOCOLPGM("M48 Z-Probe Repeatability test\n");
 
-    if (code_seen('P')) {
+    int8_t n_samples = code_seen('P') ? code_value_byte() : 10;
-      n_samples = code_value_byte();
     if (n_samples < 4 || n_samples > 50) {
       SERIAL_PROTOCOLPGM("?Sample size not plausible (4-50).\n");
       return;
     }
-    }
 
     float  X_current = current_position[X_AXIS],
            Y_current = current_position[Y_AXIS],
-           Z_current = current_position[Z_AXIS],
+           Z_start_location = current_position[Z_AXIS] + Z_RAISE_BEFORE_PROBING;
-           X_probe_location = X_current + X_PROBE_OFFSET_FROM_EXTRUDER,
-           Y_probe_location = Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER,
-           Z_start_location = Z_current + Z_RAISE_BEFORE_PROBING;
     bool deploy_probe_for_each_reading = code_seen('E');
 
-    if (code_seen('X')) {
+    float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : X_current + X_PROBE_OFFSET_FROM_EXTRUDER;
-      X_probe_location = code_value_axis_units(X_AXIS);
     #if DISABLED(DELTA)
       if (X_probe_location < MIN_PROBE_X || X_probe_location > MAX_PROBE_X) {
         out_of_range_error(PSTR("X"));
         return;
       }
     #endif
-    }
 
-    if (code_seen('Y')) {
+    float Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER;
-      Y_probe_location = code_value_axis_units(Y_AXIS);
     #if DISABLED(DELTA)
       if (Y_probe_location < MIN_PROBE_Y || Y_probe_location > MAX_PROBE_Y) {
         out_of_range_error(PSTR("Y"));
         return;
       }
-      #endif
+    #else
-    }
-
-    #if ENABLED(DELTA)
       if (sqrt(X_probe_location * X_probe_location + Y_probe_location * Y_probe_location) > DELTA_PROBEABLE_RADIUS) {
         SERIAL_PROTOCOLPGM("? (X,Y) location outside of probeable radius.\n");
         return;
@@ -4257,20 +4235,15 @@ inline void gcode_M42() {
     #endif
 
     bool seen_L = code_seen('L');
-
+    uint8_t n_legs = seen_L ? code_value_byte() : 0;
-    if (seen_L) {
-      n_legs = code_value_byte();
     if (n_legs < 0 || n_legs > 15) {
       SERIAL_PROTOCOLPGM("?Number of legs in movement not plausible (0-15).\n");
       return;
     }
     if (n_legs == 1) n_legs = 2;
-    }
 
-    if (code_seen('S')) {
+    bool schizoid_flag = code_seen('S');
-      schizoid_flag++;
+    if (schizoid_flag && !seen_L) n_legs = 7;
-      if (!seen_L) n_legs = 7;
-    }
 
     /**
      * Now get everything to the specified probe point So we can safely do a
@@ -4299,19 +4272,22 @@ inline void gcode_M42() {
      */
     setup_for_endstop_move();
 
-    probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING,
+    // Height before each probe (except the first)
+    float z_between = home_offset[Z_AXIS] + (deploy_probe_for_each_reading ? Z_RAISE_BEFORE_PROBING : Z_RAISE_BETWEEN_PROBINGS);
+
+    // Deploy the probe and probe the first point
+    probe_pt(X_probe_location, Y_probe_location,
+      home_offset[Z_AXIS] + Z_RAISE_BEFORE_PROBING,
       deploy_probe_for_each_reading ? ProbeDeployAndStow : ProbeDeploy,
       verbose_level);
 
-    raise_z_after_probing();
+    randomSeed(millis());
 
+    double mean, sigma, sample_set[n_samples];
     for (uint8_t n = 0; n < n_samples; n++) {
-      randomSeed(millis());
-      delay(500);
       if (n_legs) {
-        float radius, angle = random(0.0, 360.0);
         int dir = (random(0, 10) > 5.0) ? -1 : 1;  // clockwise or counter clockwise
-
+        float angle = random(0.0, 360.0),
               radius = random(
                 #if ENABLED(DELTA)
                   DELTA_PROBEABLE_RADIUS / 8, DELTA_PROBEABLE_RADIUS / 3
@@ -4383,26 +4359,21 @@ inline void gcode_M42() {
         } // n_legs loop
       } // n_legs
 
-      /**
+      // The last probe will differ
-       * We don't really have to do this move, but if we don't we can see a
+      bool last_probe = (n == n_samples - 1);
-       * funny shift in the Z Height because the user might not have the
+
-       * Z_RAISE_BEFORE_PROBING height identical to the Z_RAISE_BETWEEN_PROBING
+      // Probe a single point
-       * height. This gets us back to the probe location at the same height that
+      sample_set[n] = probe_pt(
-       * we have been running around the circle at.
+        X_probe_location, Y_probe_location,
-       */
+        z_between,
-      do_blocking_move_to_xy(X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER), Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER));
+        deploy_probe_for_each_reading ? ProbeDeployAndStow : last_probe ? ProbeStow : ProbeStay,
-      if (deploy_probe_for_each_reading)
+        verbose_level
-        sample_set[n] = probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING, ProbeDeployAndStow, verbose_level);
+      );
-      else {
-        if (n == n_samples - 1)
-          sample_set[n] = probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING, ProbeStow, verbose_level); else
-          sample_set[n] = probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING, ProbeStay, verbose_level);
-      }
 
       /**
        * Get the current mean for the data points we have so far
        */
-      sum = 0.0;
+      double sum = 0.0;
       for (uint8_t j = 0; j <= n; j++) sum += sample_set[j];
       mean = sum / (n + 1);
 
@@ -4416,6 +4387,7 @@ inline void gcode_M42() {
         sum += ss * ss;
       }
       sigma = sqrt(sum / (n + 1));
+      if (verbose_level > 0) {
         if (verbose_level > 1) {
           SERIAL_PROTOCOL(n + 1);
           SERIAL_PROTOCOLPGM(" of ");
@@ -4430,24 +4402,27 @@ inline void gcode_M42() {
             SERIAL_PROTOCOL_F(sigma, 6);
           }
         }
-      if (verbose_level > 0) SERIAL_EOL;
+        SERIAL_EOL;
-      delay(50);
+      }
-      do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS);
+
-    }  // End of probe loop code
+      // Raise before the next loop for the legs,
+      // or do the final raise after the last probe
+      if (n_legs || last_probe) {
+        do_blocking_move_to_z(last_probe ? home_offset[Z_AXIS] + Z_RAISE_AFTER_PROBING : z_between);
+        if (!last_probe) delay(500);
+      }
 
-    // raise_z_after_probing();
+    } // End of probe loop
 
     if (verbose_level > 0) {
       SERIAL_PROTOCOLPGM("Mean: ");
       SERIAL_PROTOCOL_F(mean, 6);
       SERIAL_EOL;
-      delay(25);
     }
 
     SERIAL_PROTOCOLPGM("Standard Deviation: ");
     SERIAL_PROTOCOL_F(sigma, 6);
     SERIAL_EOL; SERIAL_EOL;
-    delay(25);
 
     clean_up_after_endstop_move();