forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge branch 'Development' into marlin_configurator

Browse Source 
Merging latest upstream changes
master
Scott Lahteine 10 years ago
parent 83cb702e72 afc737ca0c
commit 9875352dd8
17 changed files with 316 additions and 39 deletions
Show Stats Download Patch File Download Diff File

35
Marlin/Configuration.h
Unescape View File

@ -122,6 +122,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 -1 #define TEMP_SENSOR_1 -1
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -139,6 +140,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -147,6 +149,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -323,11 +326,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
//#define DISABLE_MAX_ENDSTOPS //#define DISABLE_MAX_ENDSTOPS
//#define DISABLE_MIN_ENDSTOPS //#define DISABLE_MIN_ENDSTOPS
// Disable max endstops for compatibility with endstop checking routine
#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
#define DISABLE_MAX_ENDSTOPS
#endif
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
#define X_ENABLE_ON 0 #define X_ENABLE_ON 0
#define Y_ENABLE_ON 0 #define Y_ENABLE_ON 0
@ -341,12 +339,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DISABLE_E false // For all extruders #define DISABLE_E false // For all extruders
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -586,6 +585,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -619,6 +624,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

9
Marlin/Marlin_main.cpp
Unescape View File

@ -659,6 +659,15 @@ void setup()
digitalWrite(SERVO0_PIN, LOW); // turn it off digitalWrite(SERVO0_PIN, LOW); // turn it off
#endif // Z_PROBE_SLED #endif // Z_PROBE_SLED
setup_homepin(); setup_homepin();
#ifdef STAT_LED_RED
pinMode(STAT_LED_RED, OUTPUT);
digitalWrite(STAT_LED_RED, LOW); // turn it off
#endif
#ifdef STAT_LED_BLUE
pinMode(STAT_LED_BLUE, OUTPUT);
digitalWrite(STAT_LED_BLUE, LOW); // turn it off
#endif
} }

3
Marlin/dogm_lcd_implementation.h
Unescape View File

@ -92,6 +92,9 @@ U8GLIB_ST7920_128X64_RRD u8g(0);
#elif defined(MAKRPANEL) #elif defined(MAKRPANEL)
// The MaKrPanel display, ST7565 controller as well // The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#elif defined(VIKI2) || defined(miniVIKI)
// Mini Viki and Viki 2.0 LCD, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else #else
// for regular DOGM128 display with HW-SPI // for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0

30
Marlin/example_configurations/Hephestos/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -122,6 +122,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -139,6 +140,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -147,6 +149,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 260 #define HEATER_0_MAXTEMP 260
#define HEATER_1_MAXTEMP 260 #define HEATER_1_MAXTEMP 260
#define HEATER_2_MAXTEMP 260 #define HEATER_2_MAXTEMP 260
#define HEATER_3_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -351,8 +354,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -587,6 +591,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
#define REPRAP_DISCOUNT_SMART_CONTROLLER #define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -620,6 +630,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

32
Marlin/example_configurations/K8200/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -124,6 +124,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -141,6 +142,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -149,6 +151,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -357,10 +360,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -597,6 +601,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -630,6 +640,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

30
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -142,6 +142,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -159,6 +160,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -167,6 +169,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -380,8 +383,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstop s when homing; 1=MAX, -1=MIN // Sets direction of endstop s when homing; 1=MAX, -1=MIN
@ -590,6 +594,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -623,6 +633,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

12
Marlin/example_configurations/SCARA/Configuration_adv.h
Unescape View File

@ -78,6 +78,7 @@
#define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@ -478,6 +479,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define THERMISTORHEATER_2 TEMP_SENSOR_2 #define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR #define HEATER_2_USES_THERMISTOR
#endif #endif
#if TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED > 0 #if TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED #define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR #define BED_USES_THERMISTOR
@ -491,6 +496,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595 #define HEATER_2_USES_AD595
#endif #endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define BED_USES_AD595 #define BED_USES_AD595
#endif #endif
@ -509,6 +517,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#undef HEATER_2_MINTEMP #undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP #undef HEATER_2_MAXTEMP
#endif #endif
#if TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#endif
#if TEMP_SENSOR_BED == 0 #if TEMP_SENSOR_BED == 0
#undef BED_MINTEMP #undef BED_MINTEMP
#undef BED_MAXTEMP #undef BED_MAXTEMP

32
Marlin/example_configurations/WITBOX/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -125,6 +125,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -142,6 +143,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -150,6 +152,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 260 #define HEATER_0_MAXTEMP 260
#define HEATER_1_MAXTEMP 260 #define HEATER_1_MAXTEMP 260
#define HEATER_2_MAXTEMP 260 #define HEATER_2_MAXTEMP 260
#define HEATER_3_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -351,12 +354,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DISABLE_E false // For all extruders #define DISABLE_E false // For all extruders
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -591,6 +595,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
#define REPRAP_DISCOUNT_SMART_CONTROLLER #define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -624,6 +634,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

30
Marlin/example_configurations/delta/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -147,6 +147,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 -1 #define TEMP_SENSOR_1 -1
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -164,6 +165,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -172,6 +174,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -368,8 +371,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -495,6 +499,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -535,6 +545,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

12
Marlin/example_configurations/delta/Configuration_adv.h
Unescape View File

@ -78,6 +78,7 @@
#define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@ -472,6 +473,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define THERMISTORHEATER_2 TEMP_SENSOR_2 #define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR #define HEATER_2_USES_THERMISTOR
#endif #endif
#if TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED > 0 #if TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED #define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR #define BED_USES_THERMISTOR
@ -485,6 +490,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595 #define HEATER_2_USES_AD595
#endif #endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define BED_USES_AD595 #define BED_USES_AD595
#endif #endif
@ -503,6 +511,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#undef HEATER_2_MINTEMP #undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP #undef HEATER_2_MAXTEMP
#endif #endif
#if TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#endif
#if TEMP_SENSOR_BED == 0 #if TEMP_SENSOR_BED == 0
#undef BED_MINTEMP #undef BED_MINTEMP
#undef BED_MAXTEMP #undef BED_MAXTEMP

32
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -127,6 +127,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 12 #define TEMP_SENSOR_BED 12
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -144,6 +145,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -152,6 +154,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
@ -352,9 +355,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -565,6 +569,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -598,6 +608,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

12
Marlin/example_configurations/makibox/Configuration_adv.h
Unescape View File

@ -78,6 +78,7 @@
#define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@ -469,6 +470,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define THERMISTORHEATER_2 TEMP_SENSOR_2 #define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR #define HEATER_2_USES_THERMISTOR
#endif #endif
#if TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED > 0 #if TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED #define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR #define BED_USES_THERMISTOR
@ -482,6 +487,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595 #define HEATER_2_USES_AD595
#endif #endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define BED_USES_AD595 #define BED_USES_AD595
#endif #endif
@ -500,6 +508,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#undef HEATER_2_MINTEMP #undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP #undef HEATER_2_MAXTEMP
#endif #endif
#if TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#endif
#if TEMP_SENSOR_BED == 0 #if TEMP_SENSOR_BED == 0
#undef BED_MINTEMP #undef BED_MINTEMP
#undef BED_MAXTEMP #undef BED_MAXTEMP

34
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -1,4 +1,4 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
#include "boards.h" #include "boards.h"
@ -126,6 +126,7 @@ Here are some standard links for getting your machine calibrated:
#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -143,6 +144,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -151,6 +153,7 @@ Here are some standard links for getting your machine calibrated:
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CONFIG_STEPPERS_TOSHIBA 1 #define CONFIG_STEPPERS_TOSHIBA 1
@ -353,11 +356,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -578,6 +582,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
// http://reprap.org/wiki/MaKr3d_MaKrPanel // http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL //#define MAKRPANEL
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define VIKI2
//#define miniVIKI
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -611,6 +621,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_LCD_CONTRAST 17 #define DEFAULT_LCD_CONTRAST 17
#endif #endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920

12
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
Unescape View File

@ -78,6 +78,7 @@
#define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@ -472,6 +473,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define THERMISTORHEATER_2 TEMP_SENSOR_2 #define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR #define HEATER_2_USES_THERMISTOR
#endif #endif
#if TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED > 0 #if TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED #define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR #define BED_USES_THERMISTOR
@ -485,6 +490,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595 #define HEATER_2_USES_AD595
#endif #endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define BED_USES_AD595 #define BED_USES_AD595
#endif #endif
@ -503,6 +511,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#undef HEATER_2_MINTEMP #undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP #undef HEATER_2_MAXTEMP
#endif #endif
#if TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#endif
#if TEMP_SENSOR_BED == 0 #if TEMP_SENSOR_BED == 0
#undef BED_MINTEMP #undef BED_MINTEMP
#undef BED_MAXTEMP #undef BED_MAXTEMP

12
Marlin/planner.cpp
Unescape View File

@ -629,13 +629,21 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
block->direction_bits |= (1<<Y_AXIS); block->direction_bits |= (1<<Y_AXIS);
} }
#else #else
if (target[X_AXIS] < position[X_AXIS])
{
block->direction_bits |= (1<<X_HEAD); //AlexBorro: Save the real Extruder (head) direction in X Axis
}
if (target[Y_AXIS] < position[Y_AXIS])
{
block->direction_bits |= (1<<Y_HEAD); //AlexBorro: Save the real Extruder (head) direction in Y Axis
}
if ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]) < 0) if ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]) < 0)
{ {
block->direction_bits |= (1<<X_AXIS); block->direction_bits |= (1<<X_AXIS); //AlexBorro: Motor A direction (Incorrectly implemented as X_AXIS)
} }
if ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]) < 0) if ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]) < 0)
{ {
block->direction_bits |= (1<<Y_AXIS); block->direction_bits |= (1<<Y_AXIS); //AlexBorro: Motor B direction (Incorrectly implemented as Y_AXIS)
} }
#endif #endif
if (target[Z_AXIS] < position[Z_AXIS]) if (target[Z_AXIS] < position[Z_AXIS])

16
Marlin/stepper.cpp
Unescape View File

@ -401,10 +401,11 @@ ISR(TIMER1_COMPA_vect)
// Set direction en check limit switches // Set direction en check limit switches
#ifndef COREXY #ifndef COREXY
if ((out_bits & (1<<X_AXIS)) != 0) { // stepping along -X axis if ((out_bits & (1<<X_AXIS)) != 0) // stepping along -X axis
#else #else
if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) != 0)) { //-X occurs for -A and -B if ((out_bits & (1<<X_HEAD)) != 0) //AlexBorro: Head direction in -X axis for CoreXY bots.
#endif #endif
{
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
@ -425,7 +426,8 @@ ISR(TIMER1_COMPA_vect)
} }
} }
} }
else { // +direction else
{ // +direction
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
@ -448,10 +450,11 @@ ISR(TIMER1_COMPA_vect)
} }
#ifndef COREXY #ifndef COREXY
if ((out_bits & (1<<Y_AXIS)) != 0) { // -direction if ((out_bits & (1<<Y_AXIS)) != 0) // -direction
#else #else
if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) == 0)) { // -Y occurs for -A and +B if ((out_bits & (1<<Y_HEAD)) != 0) //AlexBorro: Head direction in -Y axis for CoreXY bots.
#endif #endif
{
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1 #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
@ -465,7 +468,8 @@ ISR(TIMER1_COMPA_vect)
#endif #endif
} }
} }
else { // +direction else
{ // +direction
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1 #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1

12
Marlin/temperature.cpp
Unescape View File

@ -136,11 +136,11 @@ static volatile bool temp_meas_ready = false;
#ifdef PIDTEMP #ifdef PIDTEMP
#ifdef PID_PARAMS_PER_EXTRUDER #ifdef PID_PARAMS_PER_EXTRUDER
float Kp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp); float Kp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp);
float Ki[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT); float Ki[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT);
float Kd[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT); float Kd[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT);
#ifdef PID_ADD_EXTRUSION_RATE #ifdef PID_ADD_EXTRUSION_RATE
float Kc[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kc, DEFAULT_Kc, DEFAULT_Kc); float Kc[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kc, DEFAULT_Kc, DEFAULT_Kc, DEFAULT_Kc);
#endif // PID_ADD_EXTRUSION_RATE #endif // PID_ADD_EXTRUSION_RATE
#else //PID_PARAMS_PER_EXTRUDER #else //PID_PARAMS_PER_EXTRUDER
float Kp = DEFAULT_Kp; float Kp = DEFAULT_Kp;
@ -460,13 +460,15 @@ void checkExtruderAutoFans()
#endif #endif
#if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1 #if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0); setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
#endif #endif
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1 #if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0); setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0);
#endif #endif
} }

Write Preview
Loading…
Cancel
Save