forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Clean up "else" and other spacing

Browse Source
master
Scott Lahteine 9 years ago committed by Richard Wackerbarth
parent 9b23490f01
commit 9bdab4f3a8
12 changed files with 115 additions and 68 deletions
Show Stats Download Patch File Download Diff File

3
Marlin/MarlinSerial.cpp
Unescape View File

@ -78,7 +78,8 @@ void MarlinSerial::begin(long baud) {
if (useU2X) { if (useU2X) {
M_UCSRxA = BIT(M_U2Xx); M_UCSRxA = BIT(M_U2Xx);
baud_setting = (F_CPU / 4 / baud - 1) / 2; baud_setting = (F_CPU / 4 / baud - 1) / 2;
} else { }
else {
M_UCSRxA = 0; M_UCSRxA = 0;
baud_setting = (F_CPU / 8 / baud - 1) / 2; baud_setting = (F_CPU / 8 / baud - 1) / 2;
} }

24
Marlin/Marlin_main.cpp
Unescape View File

@ -1688,7 +1688,8 @@ static void setup_for_endstop_move() {
if (a < b) { if (a < b) {
if (b < c) median = b; if (b < c) median = b;
if (c < a) median = a; if (c < a) median = a;
} else { // b <= a }
else { // b <= a
if (c < b) median = b; if (c < b) median = b;
if (a < c) median = a; if (a < c) median = a;
} }
@ -1783,7 +1784,8 @@ static void setup_for_endstop_move() {
#endif #endif
do_blocking_move_to_x(X_MAX_POS + SLED_DOCKING_OFFSET + offset - 1); // Dock sled a bit closer to ensure proper capturing do_blocking_move_to_x(X_MAX_POS + SLED_DOCKING_OFFSET + offset - 1); // Dock sled a bit closer to ensure proper capturing
digitalWrite(SLED_PIN, LOW); // turn off magnet digitalWrite(SLED_PIN, LOW); // turn off magnet
} else { }
else {
float z_loc = current_position[Z_AXIS]; float z_loc = current_position[Z_AXIS];
if (z_loc < Z_RAISE_BEFORE_PROBING + 5) z_loc = Z_RAISE_BEFORE_PROBING; if (z_loc < Z_RAISE_BEFORE_PROBING + 5) z_loc = Z_RAISE_BEFORE_PROBING;
do_blocking_move_to(X_MAX_POS + SLED_DOCKING_OFFSET + offset, current_position[Y_AXIS], z_loc); // this also updates current_position do_blocking_move_to(X_MAX_POS + SLED_DOCKING_OFFSET + offset, current_position[Y_AXIS], z_loc); // this also updates current_position
@ -2696,7 +2698,8 @@ inline void gcode_G28() {
SERIAL_PROTOCOLPGM("X out of range (1-" STRINGIFY(MESH_NUM_X_POINTS) ").\n"); SERIAL_PROTOCOLPGM("X out of range (1-" STRINGIFY(MESH_NUM_X_POINTS) ").\n");
return; return;
} }
} else { }
else {
SERIAL_PROTOCOLPGM("X not entered.\n"); SERIAL_PROTOCOLPGM("X not entered.\n");
return; return;
} }
@ -2706,7 +2709,8 @@ inline void gcode_G28() {
SERIAL_PROTOCOLPGM("Y out of range (1-" STRINGIFY(MESH_NUM_Y_POINTS) ").\n"); SERIAL_PROTOCOLPGM("Y out of range (1-" STRINGIFY(MESH_NUM_Y_POINTS) ").\n");
return; return;
} }
} else { }
else {
SERIAL_PROTOCOLPGM("Y not entered.\n"); SERIAL_PROTOCOLPGM("Y not entered.\n");
return; return;
} }
@ -6381,25 +6385,29 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist; ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist;
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist; ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
x_splits ^= BIT(ix); x_splits ^= BIT(ix);
} else if (ix < pix && (x_splits) & BIT(pix)) { }
else if (ix < pix && (x_splits) & BIT(pix)) {
nx = mbl.get_x(pix); nx = mbl.get_x(pix);
normalized_dist = (nx - current_position[X_AXIS]) / (x - current_position[X_AXIS]); normalized_dist = (nx - current_position[X_AXIS]) / (x - current_position[X_AXIS]);
ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist; ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist;
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist; ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
x_splits ^= BIT(pix); x_splits ^= BIT(pix);
} else if (iy > piy && (y_splits) & BIT(iy)) { }
else if (iy > piy && (y_splits) & BIT(iy)) {
ny = mbl.get_y(iy); ny = mbl.get_y(iy);
normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]); normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]);
nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist; nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist;
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist; ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
y_splits ^= BIT(iy); y_splits ^= BIT(iy);
} else if (iy < piy && (y_splits) & BIT(piy)) { }
else if (iy < piy && (y_splits) & BIT(piy)) {
ny = mbl.get_y(piy); ny = mbl.get_y(piy);
normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]); normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]);
nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist; nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist;
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist; ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
y_splits ^= BIT(piy); y_splits ^= BIT(piy);
} else { }
else {
// Already split on a border // Already split on a border
plan_buffer_line(x, y, z, e, feed_rate, extruder); plan_buffer_line(x, y, z, e, feed_rate, extruder);
set_current_to_destination(); set_current_to_destination();

6
Marlin/Sd2Card.cpp
Unescape View File

@ -192,11 +192,13 @@ uint32_t Sd2Card::cardSize() {
uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1) uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1)
| csd.v1.c_size_mult_low; | csd.v1.c_size_mult_low;
return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7); return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7);
} else if (csd.v2.csd_ver == 1) { }
else if (csd.v2.csd_ver == 1) {
uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16) uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16)
| (csd.v2.c_size_mid << 8) | csd.v2.c_size_low; | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low;
return (c_size + 1) << 10; return (c_size + 1) << 10;
} else { }
else {
error(SD_CARD_ERROR_BAD_CSD); error(SD_CARD_ERROR_BAD_CSD);
return 0; return 0;
} }

18
Marlin/Sd2PinMap.h
Unescape View File

@ -396,7 +396,8 @@ static inline __attribute__((always_inline))
bool getPinMode(uint8_t pin) { bool getPinMode(uint8_t pin) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) { if (__builtin_constant_p(pin) && pin < digitalPinCount) {
return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1; return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;
} else { }
else {
return badPinNumber(); return badPinNumber();
} }
} }
@ -405,10 +406,12 @@ static inline __attribute__((always_inline))
if (__builtin_constant_p(pin) && pin < digitalPinCount) { if (__builtin_constant_p(pin) && pin < digitalPinCount) {
if (mode) { if (mode) {
*digitalPinMap[pin].ddr |= BIT(digitalPinMap[pin].bit); *digitalPinMap[pin].ddr |= BIT(digitalPinMap[pin].bit);
} else { }
else {
*digitalPinMap[pin].ddr &= ~BIT(digitalPinMap[pin].bit); *digitalPinMap[pin].ddr &= ~BIT(digitalPinMap[pin].bit);
} }
} else { }
else {
badPinNumber(); badPinNumber();
} }
} }
@ -416,7 +419,8 @@ static inline __attribute__((always_inline))
bool fastDigitalRead(uint8_t pin) { bool fastDigitalRead(uint8_t pin) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) { if (__builtin_constant_p(pin) && pin < digitalPinCount) {
return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1; return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;
} else { }
else {
return badPinNumber(); return badPinNumber();
} }
} }
@ -425,10 +429,12 @@ static inline __attribute__((always_inline))
if (__builtin_constant_p(pin) && pin < digitalPinCount) { if (__builtin_constant_p(pin) && pin < digitalPinCount) {
if (value) { if (value) {
*digitalPinMap[pin].port |= BIT(digitalPinMap[pin].bit); *digitalPinMap[pin].port |= BIT(digitalPinMap[pin].bit);
} else { }
else {
*digitalPinMap[pin].port &= ~BIT(digitalPinMap[pin].bit); *digitalPinMap[pin].port &= ~BIT(digitalPinMap[pin].bit);
} }
} else { }
else {
badPinNumber(); badPinNumber();
} }
} }

2
Marlin/dogm_lcd_implementation.h
Unescape View File

@ -206,9 +206,11 @@ static void lcd_implementation_init() {
pinMode(LCD_PIN_RESET, OUTPUT); pinMode(LCD_PIN_RESET, OUTPUT);
digitalWrite(LCD_PIN_RESET, HIGH); digitalWrite(LCD_PIN_RESET, HIGH);
#endif #endif
#if DISABLED(MINIPANEL) // setContrast not working for Mini Panel #if DISABLED(MINIPANEL) // setContrast not working for Mini Panel
u8g.setContrast(lcd_contrast); u8g.setContrast(lcd_contrast);
#endif #endif
// FIXME: remove this workaround // FIXME: remove this workaround
// Uncomment this if you have the first generation (V1.10) of STBs board // Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight // pinMode(17, OUTPUT); // Enable LCD backlight

12
Marlin/fastio.h
Unescape View File

@ -30,15 +30,15 @@
#define _WRITE_C(IO, v) do { if (v) { \ #define _WRITE_C(IO, v) do { if (v) { \
CRITICAL_SECTION_START; \ CRITICAL_SECTION_START; \
{DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); }\ {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } \
CRITICAL_SECTION_END; \ CRITICAL_SECTION_END; \
}\ } \
else {\ else { \
CRITICAL_SECTION_START; \ CRITICAL_SECTION_START; \
{DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }\ {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); } \
CRITICAL_SECTION_END; \ CRITICAL_SECTION_END; \
}\ } \
}\ } \
while (0) while (0)
#define _WRITE(IO, v) do { if (&(DIO ## IO ## _RPORT) >= (uint8_t *)0x100) {_WRITE_C(IO, v); } else {_WRITE_NC(IO, v); }; } while (0) #define _WRITE(IO, v) do { if (&(DIO ## IO ## _RPORT) >= (uint8_t *)0x100) {_WRITE_C(IO, v); } else {_WRITE_NC(IO, v); }; } while (0)

6
Marlin/planner.cpp
Unescape View File

@ -439,10 +439,12 @@ void check_axes_activity() {
// Just starting up fan - run at full power. // Just starting up fan - run at full power.
fan_kick_end = ms + FAN_KICKSTART_TIME; fan_kick_end = ms + FAN_KICKSTART_TIME;
tail_fan_speed = 255; tail_fan_speed = 255;
} else if (fan_kick_end > ms) }
else if (fan_kick_end > ms)
// Fan still spinning up. // Fan still spinning up.
tail_fan_speed = 255; tail_fan_speed = 255;
} else { }
else {
fan_kick_end = 0; fan_kick_end = 0;
} }
#endif //FAN_KICKSTART_TIME #endif //FAN_KICKSTART_TIME

9
Marlin/qr_solve.cpp
Unescape View File

@ -494,7 +494,8 @@ double dnrm2(int n, double x[], int incx)
if (scale < absxi) { if (scale < absxi) {
ssq = 1.0 + ssq * (scale / absxi) * (scale / absxi); ssq = 1.0 + ssq * (scale / absxi) * (scale / absxi);
scale = absxi; scale = absxi;
} else }
else
ssq = ssq + (absxi / scale) * (absxi / scale); ssq = ssq + (absxi / scale) * (absxi / scale);
} }
ix += incx; ix += incx;
@ -1404,7 +1405,8 @@ void dscal(int n, double sa, double x[], int incx)
x[i + 3] = sa * x[i + 3]; x[i + 3] = sa * x[i + 3];
x[i + 4] = sa * x[i + 4]; x[i + 4] = sa * x[i + 4];
} }
} else { }
else {
if (0 <= incx) if (0 <= incx)
ix = 0; ix = 0;
else else
@ -1486,7 +1488,6 @@ void dswap(int n, double x[], int incx, double y[], int incy)
x[i + 2] = y[i + 2]; x[i + 2] = y[i + 2];
y[i + 2] = temp; y[i + 2] = temp;
} }
} else {
if (0 <= incx) if (0 <= incx)
ix = 0; ix = 0;
else else
@ -1495,6 +1496,8 @@ void dswap(int n, double x[], int incx, double y[], int incy)
iy = 0; iy = 0;
else else
iy = (- n + 1) * incy; iy = (- n + 1) * incy;
}
else {
for (i = 0; i < n; i++) { for (i = 0; i < n; i++) {
temp = x[ix]; temp = x[ix];
x[ix] = y[iy]; x[ix] = y[iy];

6
Marlin/stepper.cpp
Unescape View File

@ -139,11 +139,13 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
if (Z_HOME_DIR > 0) {\ if (Z_HOME_DIR > 0) {\
if (!(TEST(old_endstop_bits, Z_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z_motor) Z_STEP_WRITE(v); \ if (!(TEST(old_endstop_bits, Z_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z2_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \ if (!(TEST(old_endstop_bits, Z2_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
} else {\ } \
else { \
if (!(TEST(old_endstop_bits, Z_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z_motor) Z_STEP_WRITE(v); \ if (!(TEST(old_endstop_bits, Z_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z2_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \ if (!(TEST(old_endstop_bits, Z2_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
} \ } \
} else { \ } \
else { \
Z_STEP_WRITE(v); \ Z_STEP_WRITE(v); \
Z2_STEP_WRITE(v); \ Z2_STEP_WRITE(v); \
} }

3
Marlin/temperature.cpp
Unescape View File

@ -511,7 +511,8 @@ float get_pid_output(int e) {
if (e_position > last_position[e]) { if (e_position > last_position[e]) {
lpq[lpq_ptr++] = e_position - last_position[e]; lpq[lpq_ptr++] = e_position - last_position[e];
last_position[e] = e_position; last_position[e] = e_position;
} else { }
else {
lpq[lpq_ptr++] = 0; lpq[lpq_ptr++] = 0;
} }
if (lpq_ptr >= lpq_len) lpq_ptr = 0; if (lpq_ptr >= lpq_len) lpq_ptr = 0;

80
Marlin/utf_mapper.h
Unescape View File

@ -123,10 +123,12 @@
#endif // SIMULATE_ROMFONT #endif // SIMULATE_ROMFONT
#if ENABLED(MAPPER_NON) #if ENABLED(MAPPER_NON)
char charset_mapper(char c){
char charset_mapper(char c) {
HARDWARE_CHAR_OUT( c ); HARDWARE_CHAR_OUT( c );
return 1; return 1;
} }
#elif ENABLED(MAPPER_C2C3) #elif ENABLED(MAPPER_C2C3)
uint8_t utf_hi_char; // UTF-8 high part uint8_t utf_hi_char; // UTF-8 high part
bool seen_c2 = false; bool seen_c2 = false;
@ -138,12 +140,12 @@
seen_c2 = true; seen_c2 = true;
return 0; return 0;
} }
else if (seen_c2){ else if (seen_c2) {
d &= 0x3f; d &= 0x3f;
#ifndef MAPPER_ONE_TO_ONE #ifndef MAPPER_ONE_TO_ONE
HARDWARE_CHAR_OUT( (char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x20 ) ); HARDWARE_CHAR_OUT((char)pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20));
#else #else
HARDWARE_CHAR_OUT( (char) (0x80 + ( utf_hi_char << 6 ) + d) ) ; HARDWARE_CHAR_OUT((char)(0x80 + (utf_hi_char << 6) + d)) ;
#endif #endif
} }
else { else {
@ -156,96 +158,114 @@
seen_c2 = false; seen_c2 = false;
return 1; return 1;
} }
#elif ENABLED(MAPPER_D0D1_MOD) #elif ENABLED(MAPPER_D0D1_MOD)
uint8_t utf_hi_char; // UTF-8 high part uint8_t utf_hi_char; // UTF-8 high part
bool seen_d5 = false; bool seen_d5 = false;
char charset_mapper(char c){
char charset_mapper(char c) {
// it is a Russian alphabet translation // it is a Russian alphabet translation
// except 0401 --> 0xa2 = Ё, 0451 --> 0xb5 = ё // except 0401 --> 0xa2 = Ё, 0451 --> 0xb5 = ё
uint8_t d = c; uint8_t d = c;
if ( d >= 0x80 ) { // UTF-8 handling if (d >= 0x80) { // UTF-8 handling
if ((d >= 0xd0) && (!seen_d5)) { if (d >= 0xd0 && !seen_d5) {
utf_hi_char = d - 0xd0; utf_hi_char = d - 0xd0;
seen_d5 = true; seen_d5 = true;
return 0; return 0;
} else if (seen_d5) { }
else if (seen_d5) {
d &= 0x3f; d &= 0x3f;
if ( !utf_hi_char && ( d == 1 )) { if (!utf_hi_char && d == 1) {
HARDWARE_CHAR_OUT((char) 0xa2 ); // Ё HARDWARE_CHAR_OUT((char) 0xa2); // Ё
} else if ((utf_hi_char == 1) && (d == 0x11)) { }
HARDWARE_CHAR_OUT((char) 0xb5 ); // ё else if (utf_hi_char == 1 && d == 0x11) {
} else { HARDWARE_CHAR_OUT((char)0xb5); // ё
HARDWARE_CHAR_OUT((char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x10 ) ); }
else {
HARDWARE_CHAR_OUT((char)pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x10));
} }
} }
else { else {
HARDWARE_CHAR_OUT('?'); HARDWARE_CHAR_OUT('?');
} }
} else { }
else {
HARDWARE_CHAR_OUT((char) c ); HARDWARE_CHAR_OUT((char) c );
} }
seen_d5 = false; seen_d5 = false;
return 1; return 1;
} }
#elif ENABLED(MAPPER_D0D1) #elif ENABLED(MAPPER_D0D1)
uint8_t utf_hi_char; // UTF-8 high part uint8_t utf_hi_char; // UTF-8 high part
bool seen_d5 = false; bool seen_d5 = false;
char charset_mapper(char c) { char charset_mapper(char c) {
uint8_t d = c; uint8_t d = c;
if ( d >= 0x80u ) { // UTF-8 handling if (d >= 0x80u) { // UTF-8 handling
if ((d >= 0xd0u) && (!seen_d5)) { if (d >= 0xd0u && !seen_d5) {
utf_hi_char = d - 0xd0u; utf_hi_char = d - 0xd0u;
seen_d5 = true; seen_d5 = true;
return 0; return 0;
} else if (seen_d5) { }
else if (seen_d5) {
d &= 0x3fu; d &= 0x3fu;
#ifndef MAPPER_ONE_TO_ONE #ifndef MAPPER_ONE_TO_ONE
HARDWARE_CHAR_OUT( (char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x20 ) ); HARDWARE_CHAR_OUT((char)pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20));
#else #else
HARDWARE_CHAR_OUT( (char) (0xa0u + ( utf_hi_char << 6 ) + d ) ) ; HARDWARE_CHAR_OUT((char)(0xa0u + (utf_hi_char << 6) + d)) ;
#endif #endif
} else { }
else {
HARDWARE_CHAR_OUT('?'); HARDWARE_CHAR_OUT('?');
} }
} else { }
else {
HARDWARE_CHAR_OUT((char) c ); HARDWARE_CHAR_OUT((char) c );
} }
seen_d5 = false; seen_d5 = false;
return 1; return 1;
} }
#elif ENABLED(MAPPER_E382E383) #elif ENABLED(MAPPER_E382E383)
uint8_t utf_hi_char; // UTF-8 high part uint8_t utf_hi_char; // UTF-8 high part
bool seen_e3 = false; bool seen_e3 = false;
bool seen_82_83 = false; bool seen_82_83 = false;
char charset_mapper(char c){ char charset_mapper(char c){
uint8_t d = c; uint8_t d = c;
if ( d >= 0x80 ) { // UTF-8 handling if (d >= 0x80) { // UTF-8 handling
if ( (d == 0xe3) && (seen_e3 == false)) { if (d == 0xe3 && !seen_e3) {
seen_e3 = true; seen_e3 = true;
return 0; // eat 0xe3 return 0; // eat 0xe3
} else if ( (d >= 0x82) && (seen_e3 == true) && (seen_82_83 == false)) { }
else if (d >= 0x82 && seen_e3 && !seen_82_83) {
utf_hi_char = d - 0x82; utf_hi_char = d - 0x82;
seen_82_83 = true; seen_82_83 = true;
return 0; return 0;
} else if ((seen_e3 == true) && (seen_82_83 == true)){ }
else if (seen_e3 && seen_82_83) {
d &= 0x3f; d &= 0x3f;
#ifndef MAPPER_ONE_TO_ONE #ifndef MAPPER_ONE_TO_ONE
HARDWARE_CHAR_OUT( (char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x20 ) ); HARDWARE_CHAR_OUT((char)pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20));
#else #else
HARDWARE_CHAR_OUT( (char) (0x80 + ( utf_hi_char << 6 ) + d ) ) ; HARDWARE_CHAR_OUT((char)(0x80 + (utf_hi_char << 6) + d)) ;
#endif #endif
} else { }
else {
HARDWARE_CHAR_OUT((char) '?' ); HARDWARE_CHAR_OUT((char) '?' );
} }
} else { }
else {
HARDWARE_CHAR_OUT((char) c ); HARDWARE_CHAR_OUT((char) c );
} }
seen_e3 = false; seen_e3 = false;
seen_82_83 = false; seen_82_83 = false;
return 1; return 1;
} }
#else #else
#error "You have to define one of the DISPLAY_INPUT_CODE_MAPPERs in your language_xx.h file" // should not occur because (en) will set. #error "You have to define one of the DISPLAY_INPUT_CODE_MAPPERs in your language_xx.h file" // should not occur because (en) will set.
#endif // code mappers #endif // code mappers
#endif // UTF_MAPPER_H #endif // UTF_MAPPER_H

Write Preview
Loading…
Cancel
Save