Merge pull request #1508 from AnHardt/iss1492

Fix iss#1492
master
Scott Lahteine 10 years ago
commit 9c35ed149d

@ -14,10 +14,14 @@
// it is a Russian alphabet translation // it is a Russian alphabet translation
// except 0401 --> 0xa2 = ╗, 0451 --> 0xb5 // except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
const PROGMEM uint8_t utf_recode[] = const PROGMEM uint8_t utf_recode[] =
{ 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f, { 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,
0xa8,0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1, 0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,0xa8,
0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f, 0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,
0xbe,0x70,0x63,0xbf,0x79,0xe4,0x78,0xe5,0xc0,0xc1,0xe6,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7 0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,
0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,0xbe,
0x70,0x63,0xbf,0x79,0xe4,0x78,0xe5,0xc0,
0xc1,0xe6,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7
}; };
// When the display powers up, it is configured as follows: // When the display powers up, it is configured as follows:

@ -65,7 +65,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
createFilename(lfilename,p); createFilename(lfilename,p);
path[0]=0; path[0]=0;
if(strlen(prepend)==0) //avoid leading / if already in prepend if(prepend[0]==0) //avoid leading / if already in prepend
{ {
strcat(path,"/"); strcat(path,"/");
} }

@ -315,7 +315,7 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) { static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
char c; char c;
uint8_t n = LCD_WIDTH - 2 - (pgm ? strlen_P(data) : (strlen(data))); uint8_t n = LCD_WIDTH - 2 - (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
lcd_implementation_mark_as_selected(row, pre_char); lcd_implementation_mark_as_selected(row, pre_char);
@ -377,18 +377,18 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
uint8_t char_width = DOG_CHAR_WIDTH; uint8_t char_width = DOG_CHAR_WIDTH;
#ifdef USE_BIG_EDIT_FONT #ifdef USE_BIG_EDIT_FONT
if (strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) { if (lcd_strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
u8g.setFont(FONT_MENU_EDIT); u8g.setFont(FONT_MENU_EDIT);
lcd_width = LCD_WIDTH_EDIT + 1; lcd_width = LCD_WIDTH_EDIT + 1;
char_width = DOG_CHAR_WIDTH_EDIT; char_width = DOG_CHAR_WIDTH_EDIT;
if (strlen_P(pstr) >= LCD_WIDTH_EDIT - strlen(value)) rows = 2; if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - lcd_strlen(value)) rows = 2;
} }
else { else {
u8g.setFont(FONT_MENU); u8g.setFont(FONT_MENU);
} }
#endif #endif
if (strlen_P(pstr) > LCD_WIDTH - 2 - strlen(value)) rows = 2; if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - lcd_strlen(value)) rows = 2;
const float kHalfChar = DOG_CHAR_HEIGHT_EDIT / 2; const float kHalfChar = DOG_CHAR_HEIGHT_EDIT / 2;
float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3 float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3
@ -396,7 +396,7 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
u8g.setPrintPos(0, rowHeight + kHalfChar); u8g.setPrintPos(0, rowHeight + kHalfChar);
lcd_printPGM(pstr); lcd_printPGM(pstr);
u8g.print(':'); u8g.print(':');
u8g.setPrintPos((lcd_width-1-strlen(value)) * char_width, rows * rowHeight + kHalfChar); u8g.setPrintPos((lcd_width-1-lcd_strlen(value)) * char_width, rows * rowHeight + kHalfChar);
u8g.print(value); u8g.print(value);
} }

@ -13,7 +13,7 @@
#define WELCOME_MSG MACHINE_NAME " Готов." #define WELCOME_MSG MACHINE_NAME " Готов."
#define MSG_SD_INSERTED "Карта вставлена" #define MSG_SD_INSERTED "Карта вставлена"
#define MSG_SD_REMOVED "Карта извлечена" #define MSG_SD_REMOVED "Карта извлечена"
#define MSG_MAIN "Меню \003" #define MSG_MAIN "Меню"
#define MSG_AUTOSTART "Автостарт" #define MSG_AUTOSTART "Автостарт"
#define MSG_DISABLE_STEPPERS "Выкл. двигатели" #define MSG_DISABLE_STEPPERS "Выкл. двигатели"
#define MSG_AUTO_HOME "Парковка" #define MSG_AUTO_HOME "Парковка"
@ -43,14 +43,14 @@
#define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm" #define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Скорость" #define MSG_SPEED "Скорость"
#define MSG_NOZZLE "\002 Фильера" #define MSG_NOZZLE LCD_STR_THERMOMETER " Фильера"
#define MSG_BED "\002 Кровать" #define MSG_BED LCD_STR_THERMOMETER " Кровать"
#define MSG_FAN_SPEED "Куллер" #define MSG_FAN_SPEED "Куллер"
#define MSG_FLOW "Поток" #define MSG_FLOW "Поток"
#define MSG_CONTROL "Настройки \003" #define MSG_CONTROL "Настройки"
#define MSG_MIN "\002 Минимум" #define MSG_MIN LCD_STR_THERMOMETER " Минимум"
#define MSG_MAX "\002 Максимум" #define MSG_MAX LCD_STR_THERMOMETER " Максимум"
#define MSG_FACTOR "\002 Фактор" #define MSG_FACTOR LCD_STR_THERMOMETER " Фактор"
#define MSG_AUTOTEMP "Autotemp" #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Вкл. " #define MSG_ON "Вкл. "
#define MSG_OFF "Выкл. " #define MSG_OFF "Выкл. "
@ -75,8 +75,8 @@
#define MSG_YSTEPS "Y шаг/mm" #define MSG_YSTEPS "Y шаг/mm"
#define MSG_ZSTEPS "Z шаг/mm" #define MSG_ZSTEPS "Z шаг/mm"
#define MSG_ESTEPS "E шаг/mm" #define MSG_ESTEPS "E шаг/mm"
#define MSG_TEMPERATURE "Температура \x7E" #define MSG_TEMPERATURE "Температура"
#define MSG_MOTION "Скорости \x7E" #define MSG_MOTION "Скорости"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" #define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
@ -86,14 +86,14 @@
#define MSG_STORE_EPROM "Сохранить в EPROM" #define MSG_STORE_EPROM "Сохранить в EPROM"
#define MSG_LOAD_EPROM "Загруз. из EPROM" #define MSG_LOAD_EPROM "Загруз. из EPROM"
#define MSG_RESTORE_FAILSAFE "Сброс настроек" #define MSG_RESTORE_FAILSAFE "Сброс настроек"
#define MSG_REFRESH "\004Обновить" #define MSG_REFRESH LCD_STR_REFRESH "Обновить"
#define MSG_WATCH "Обзор \003" #define MSG_WATCH "Обзор"
#define MSG_PREPARE "Действия \x7E" #define MSG_PREPARE "Действия"
#define MSG_TUNE "Настройки \x7E" #define MSG_TUNE "Настройки"
#define MSG_PAUSE_PRINT "Продолжить печать" #define MSG_PAUSE_PRINT "Продолжить печать"
#define MSG_RESUME_PRINT "возобн. печать" #define MSG_RESUME_PRINT "возобн. печать"
#define MSG_STOP_PRINT "Остановить печать" #define MSG_STOP_PRINT "Остановить печать"
#define MSG_CARD_MENU "Меню карты \x7E" #define MSG_CARD_MENU "Меню карты"
#define MSG_NO_CARD "Нет карты" #define MSG_NO_CARD "Нет карты"
#define MSG_DWELL "Сон..." #define MSG_DWELL "Сон..."
#define MSG_USERWAIT "Ожиданиие" #define MSG_USERWAIT "Ожиданиие"

@ -1260,6 +1260,26 @@ void lcd_init()
#endif #endif
} }
int lcd_strlen(char *s) {
int i = 0, j = 0;
while (s[i]) {
if ((s[i] & 0xc0) != 0x80) j++;
i++;
}
return j;
}
int lcd_strlen_P(const char *s) {
int j = 0;
while (pgm_read_byte(s)) {
if ((pgm_read_byte(s) & 0xc0) != 0x80) j++;
s++;
}
return j;
}
void lcd_update() void lcd_update()
{ {
static unsigned long timeoutToStatus = 0; static unsigned long timeoutToStatus = 0;
@ -1372,7 +1392,7 @@ void lcd_ignore_click(bool b)
} }
void lcd_finishstatus() { void lcd_finishstatus() {
int len = strlen(lcd_status_message); int len = lcd_strlen(lcd_status_message);
if (len > 0) { if (len > 0) {
while (len < LCD_WIDTH) { while (len < LCD_WIDTH) {
lcd_status_message[len++] = ' '; lcd_status_message[len++] = ' ';

@ -4,7 +4,8 @@
#include "Marlin.h" #include "Marlin.h"
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
int lcd_strlen(char *s);
int lcd_strlen_P(const char *s);
void lcd_update(); void lcd_update();
void lcd_init(); void lcd_init();
void lcd_setstatus(const char* message); void lcd_setstatus(const char* message);

@ -636,7 +636,7 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
{ {
lcd.print(c); lcd.print(c);
pstr++; pstr++;
n--; if ((pgm_read_byte(pstr) & 0xc0) != 0x80) n--;
} }
while(n--) while(n--)
lcd.print(' '); lcd.print(' ');
@ -648,9 +648,9 @@ static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const
char c; char c;
//Use all characters in narrow LCDs //Use all characters in narrow LCDs
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data); uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen(data);
#else #else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data); uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen(data);
#endif #endif
lcd.setCursor(0, row); lcd.setCursor(0, row);
lcd.print(pre_char); lcd.print(pre_char);
@ -658,7 +658,7 @@ static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const
{ {
lcd.print(c); lcd.print(c);
pstr++; pstr++;
n--; if ((pgm_read_byte(pstr) & 0xc0) != 0x80) n--;
} }
lcd.print(':'); lcd.print(':');
while(n--) while(n--)
@ -670,9 +670,9 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
char c; char c;
//Use all characters in narrow LCDs //Use all characters in narrow LCDs
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data); uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen_P(data);
#else #else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data); uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen_P(data);
#endif #endif
lcd.setCursor(0, row); lcd.setCursor(0, row);
lcd.print(pre_char); lcd.print(pre_char);
@ -680,7 +680,7 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
{ {
lcd.print(c); lcd.print(c);
pstr++; pstr++;
n--; if ((pgm_read_byte(pstr) & 0xc0) != 0x80) n--;
} }
lcd.print(':'); lcd.print(':');
while(n--) while(n--)
@ -733,9 +733,9 @@ void lcd_implementation_drawedit(const char* pstr, char* value)
lcd_printPGM(pstr); lcd_printPGM(pstr);
lcd.print(':'); lcd.print(':');
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
lcd.setCursor(LCD_WIDTH - strlen(value), 1); lcd.setCursor(LCD_WIDTH - lcd_strlen(value), 1);
#else #else
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1); lcd.setCursor(LCD_WIDTH -1 - lcd_strlen(value), 1);
#endif #endif
lcd.print(value); lcd.print(value);
} }

Loading…
Cancel
Save