Merge pull request #4278 from thinkyhead/rc_more_hotends_1

Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1

Marlin/temperature.cpp

@@ -128,7 +128,7 @@ volatile bool Temperature::temp_meas_ready = false;
 
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
     float Temperature::cTerm[HOTENDS];
-    long Temperature::last_position[HOTENDS];
+    long Temperature::last_e_position;
     long Temperature::lpq[LPQ_MAX_LEN];
     int Temperature::lpq_ptr = 0;
   #endif
@@ -444,11 +444,11 @@ Temperature::Temperature() { }
 
 void Temperature::updatePID() {
   #if ENABLED(PIDTEMP)
-    HOTEND_LOOP() {
-      temp_iState_max[e] = (PID_INTEGRAL_DRIVE_MAX) / PID_PARAM(Ki, e);
     #if ENABLED(PID_ADD_EXTRUSION_RATE)
-        last_position[e] = 0;
+      last_e_position = 0;
     #endif
+    HOTEND_LOOP() {
+      temp_iState_max[e] = (PID_INTEGRAL_DRIVE_MAX) / PID_PARAM(Ki, e);
     }
   #endif
   #if ENABLED(PIDTEMPBED)
@@ -531,10 +531,8 @@ float Temperature::get_pid_output(int e) {
   #if HOTENDS == 1
     UNUSED(e);
     #define _HOTEND_TEST     true
-    #define _HOTEND_EXTRUDER active_extruder
   #else
     #define _HOTEND_TEST     e == active_extruder
-    #define _HOTEND_EXTRUDER e
   #endif
   float pid_output;
   #if ENABLED(PIDTEMP)
@@ -566,14 +564,14 @@ float Temperature::get_pid_output(int e) {
           cTerm[HOTEND_INDEX] = 0;
           if (_HOTEND_TEST) {
             long e_position = stepper.position(E_AXIS);
-            if (e_position > last_position[_HOTEND_EXTRUDER]) {
-              lpq[lpq_ptr++] = e_position - last_position[_HOTEND_EXTRUDER];
-              last_position[_HOTEND_EXTRUDER] = e_position;
+            if (e_position > last_e_position) {
+              lpq[lpq_ptr] = e_position - last_e_position;
+              last_e_position = e_position;
             }
             else {
-              lpq[lpq_ptr++] = 0;
+              lpq[lpq_ptr] = 0;
             }
-            if (lpq_ptr >= lpq_len) lpq_ptr = 0;
+            if (++lpq_ptr >= lpq_len) lpq_ptr = 0;
             cTerm[HOTEND_INDEX] = (lpq[lpq_ptr] / planner.axis_steps_per_mm[E_AXIS]) * PID_PARAM(Kc, HOTEND_INDEX);
             pid_output += cTerm[HOTEND_INDEX];
           }
@@ -952,7 +950,7 @@ void Temperature::init() {
       temp_iState_min[e] = 0.0;
       temp_iState_max[e] = (PID_INTEGRAL_DRIVE_MAX) / PID_PARAM(Ki, e);
       #if ENABLED(PID_ADD_EXTRUSION_RATE)
-        last_position[e] = 0;
+        last_e_position = 0;
       #endif
     #endif //PIDTEMP
     #if ENABLED(PIDTEMPBED)
@@ -961,6 +959,10 @@ void Temperature::init() {
     #endif //PIDTEMPBED
   }
 
+  #if ENABLED(PIDTEMP) && ENABLED(PID_ADD_EXTRUSION_RATE)
+    last_e_position = 0;
+  #endif
+
   #if HAS_HEATER_0
     SET_OUTPUT(HEATER_0_PIN);
   #endif

Marlin/temperature.h

@@ -76,13 +76,13 @@ class Temperature {
 
     #if ENABLED(PIDTEMP)
 
-      #if ENABLED(PID_PARAMS_PER_HOTEND)
+      #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1
 
         static float Kp[HOTENDS], Ki[HOTENDS], Kd[HOTENDS];
         #if ENABLED(PID_ADD_EXTRUSION_RATE)
           static float Kc[HOTENDS];
         #endif
-        #define PID_PARAM(param, e) Temperature::param[e]
+        #define PID_PARAM(param, h) Temperature::param[h]
 
       #else
 
@@ -90,7 +90,7 @@ class Temperature {
         #if ENABLED(PID_ADD_EXTRUSION_RATE)
           static float Kc;
         #endif
-        #define PID_PARAM(param, e) Temperature::param
+        #define PID_PARAM(param, h) Temperature::param
 
       #endif // PID_PARAMS_PER_HOTEND
 
@@ -150,7 +150,7 @@ class Temperature {
 
       #if ENABLED(PID_ADD_EXTRUSION_RATE)
         static float cTerm[HOTENDS];
-        static long last_position[HOTENDS];
+        static long last_e_position;
         static long lpq[LPQ_MAX_LEN];
         static int lpq_ptr;
       #endif
@@ -247,11 +247,24 @@ class Temperature {
      * Preheating hotends
      */
     #ifdef MILLISECONDS_PREHEAT_TIME
-      static bool is_preheating(uint8_t hotend) {
-        return preheat_end_time[hotend] && PENDING(millis(), preheat_end_time[hotend]);
+      static bool is_preheating(uint8_t e) {
+        #if HOTENDS == 1
+          UNUSED(e);
+        #endif
+        return preheat_end_time[HOTEND_INDEX] && PENDING(millis(), preheat_end_time[HOTEND_INDEX]);
+      }
+      static void start_preheat_time(uint8_t e) {
+        #if HOTENDS == 1
+          UNUSED(e);
+        #endif
+        preheat_end_time[HOTEND_INDEX] = millis() + MILLISECONDS_PREHEAT_TIME;
+      }
+      static void reset_preheat_time(uint8_t e) {
+        #if HOTENDS == 1
+          UNUSED(e);
+        #endif
+        preheat_end_time[HOTEND_INDEX] = 0;
       }
-      static void start_preheat_time(uint8_t hotend) { preheat_end_time[hotend] = millis() + MILLISECONDS_PREHEAT_TIME; }
-      static void reset_preheat_time(uint8_t hotend) { preheat_end_time[hotend] = 0; }
     #else
       #define is_preheating(n) (false)
     #endif
@@ -306,9 +319,9 @@ class Temperature {
       #endif
       #ifdef MILLISECONDS_PREHEAT_TIME
         if (celsius == 0.0f)
-          reset_preheat_time(hotend);
-        else if (target_temperature[hotend] == 0.0f)
-          start_preheat_time(hotend);
+          reset_preheat_time(HOTEND_INDEX);
+        else if (target_temperature[HOTEND_INDEX] == 0.0f)
+          start_preheat_time(HOTEND_INDEX);
       #endif
       target_temperature[HOTEND_INDEX] = celsius;
       #if ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0