forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.

Browse Source
master
Johann Rocholl 12 years ago
parent 6aa87a7b67
commit a30007caa4
1 changed files with 38 additions and 168 deletions
Show Stats Download Patch File Download Diff File

206
Marlin/pins.h
Unescape View File

@ -957,198 +957,68 @@
#endif #endif
/**************************************************************************************** /****************************************************************************************
* Teensylu 0.7 pin assingments (ATMEGA90USB) * Teensylu 0.7 / Printrboard pin assignments (AT90USB1286)
* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! * Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
****************************************************************************************/
#if MOTHERBOARD == 8
#define MOTHERBOARD 8
#define KNOWN_BOARD 1
#define X_STEP_PIN 0
#define X_DIR_PIN 1
#define X_ENABLE_PIN 39
#define X_MIN_PIN 13
#define X_MAX_PIN -1
#define Y_STEP_PIN 2
#define Y_DIR_PIN 3
#define Y_ENABLE_PIN 38
#define Y_MIN_PIN 14
#define Y_MAX_PIN -1
#define Z_STEP_PIN 4
#define Z_DIR_PIN 5
#define Z_ENABLE_PIN 23
#define Z_MIN_PIN 15
#define Z_MAX_PIN -1
#define E0_STEP_PIN 6
#define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 22 // Fan
#define TEMP_0_PIN 7 // Extruder
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // Bed
#define SDPOWER -1
#define SDSS 8
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define ALARM_PIN -1
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11
#define MOSI_PIN 10
#endif
#endif
/****************************************************************************************
* Printrboard Rev. B pin assingments (ATMEGA90USB1286)
* Requires the Teensyduino software with Teensy++ 2.0 selected in arduino IDE!
http://www.pjrc.com/teensy/teensyduino.html http://www.pjrc.com/teensy/teensyduino.html
* See http://reprap.org/wiki/Printrboard for more info * See http://reprap.org/wiki/Printrboard for more info
****************************************************************************************/ ****************************************************************************************/
#if MOTHERBOARD == 81 #if MOTHERBOARD == 8 || MOTHERBOARD == 81
#undef MOTHERBOARD #undef MOTHERBOARD
#define MOTHERBOARD 8 // Disable MarlinSerial etc. #define MOTHERBOARD 8
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
#ifndef __AVR_AT90USB1286__ #ifndef __AVR_AT90USB1286__
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif #endif
#define X_STEP_PIN 28 #define X_STEP_PIN 0
#define X_DIR_PIN 29 #define X_DIR_PIN 1
#define X_ENABLE_PIN 19 #define X_ENABLE_PIN 39
#define X_MIN_PIN 47 #define X_MIN_PIN 13
#define X_MAX_PIN -1 #define X_MAX_PIN -1
#define Y_STEP_PIN 30 #define Y_STEP_PIN 2
#define Y_DIR_PIN 31 #define Y_DIR_PIN 3
#define Y_ENABLE_PIN 18 #define Y_ENABLE_PIN 38
#define Y_MIN_PIN 20 #define Y_MIN_PIN 14
#define Y_MAX_PIN -1 #define Y_MAX_PIN -1
#define Z_STEP_PIN 32 #define Z_STEP_PIN 4
#define Z_DIR_PIN 33 #define Z_DIR_PIN 5
#define Z_ENABLE_PIN 17 #define Z_ENABLE_PIN 23
#define Z_MIN_PIN 36 #define Z_MIN_PIN 15
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define E0_STEP_PIN 34 #define E0_STEP_PIN 6
#define E0_DIR_PIN 35 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 19
#define HEATER_0_PIN 15 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN 14 // Bed #define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 16 // Fan #define FAN_PIN 22
#define TEMP_0_PIN 1 // Extruder - ANALOG PIN NUMBERING #define TEMP_0_PIN 7 // Extruder / Analog PIN numbering
#define TEMP_1_PIN -1 #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 0 // Bed - ANALOG PIN NUMBERING #define TEMP_BED_PIN 6 // Bed / Analog PIN numbering
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 26 #define SDSS 8
#define LED_PIN -1 #define LED_PIN -1
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#define KILL_PIN -1 #define KILL_PIN -1
#define ALARM_PIN -1
#ifndef SDSUPPORT #ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 21 #define SCK_PIN 9
#define MISO_PIN 22 #define MISO_PIN 11
#define MOSI_PIN 23 #define MOSI_PIN 10
#endif #endif
#ifdef ULTRA_LCD #endif // MOTHERBOARD == 8 (Teensylu) or 81 (Printrboard)
#ifdef NEWPANEL
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
#ifndef MCP28017_LCD
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // MCP28017_LCD
//buttons are directly attached using AUX-2
#define BTN_EN1 11 // PC1
#define BTN_EN2 12 // PC2
#ifndef VERSAPANEL
#define BTN_ENC 31 //the click
#endif
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT -1 // Ramps does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define BEEPER 33 No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif
#endif //ULTRA_LCD
#endif
/**************************************************************************************** /****************************************************************************************
* Brainwave 1.0 pin assignments (AT90USB646) * Brainwave 1.0 pin assignments (AT90USB646)
@ -1185,10 +1055,10 @@
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define Z_ATT_PIN 16 #define Z_ATT_PIN 16
#define E0_STEP_PIN 21 #define E0_STEP_PIN 21
#define E0_DIR_PIN 23 #define E0_DIR_PIN 23
#define E0_ENABLE_PIN 22 #define E0_ENABLE_PIN 22
#define E0_ATT_PIN 20 #define E0_ATT_PIN 20
#define HEATER_0_PIN 4 // Extruder #define HEATER_0_PIN 4 // Extruder
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
@ -1210,12 +1080,12 @@
#ifndef SDSUPPORT #ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 21 #define SCK_PIN 9
#define MISO_PIN 22 #define MISO_PIN 11
#define MOSI_PIN 23 #define MOSI_PIN 10
#endif #endif
#endif #endif // MOTHERBOARD == 82 (Brainwave)
/**************************************************************************************** /****************************************************************************************
* Gen3+ pin assignment * Gen3+ pin assignment

Write Preview
Loading…
Cancel
Save